sr20s14zenki
05-24-2011, 07:26 PM
I have for sale an engine ready to be machined and built. It features the following. I will part out if desired, but would rather sell as a whole, to raise money for my 2jz s14 project.
Cp pistons/Eagle rods- 500$ for the set, all in boxes. The pistons are 86.5mm overbore.
I also have a good block, fully disassembled, complete with a good crank, all caps, girdle, etc. I had it checked and .5mm overbore should be just right to straighten out the bores, so its a great block for the above pistons. Of course, you will need bearings, and a gasket kit, and no it does not come with a head.
i want 200$ for the above.
will sell the whole setup for 650$
let me know via pm.
Thank you in advance for your interest.
Cp pistons/Eagle rods- 500$ for the set, all in boxes. The pistons are 86.5mm overbore.
I also have a good block, fully disassembled, complete with a good crank, all caps, girdle, etc. I had it checked and .5mm overbore should be just right to straighten out the bores, so its a great block for the above pistons. Of course, you will need bearings, and a gasket kit, and no it does not come with a head.
i want 200$ for the above.
will sell the whole setup for 650$
let me know via pm.
Thank you in advance for your interest.