Jetta-2.0
06-02-2011, 09:45 PM
hey guys, up for grabs, i have 2 alpine amps.
They are both V12 amps.
One is a Mono power amplifer # MRD-M300 $120 OBO
150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
MOSFET power supply and output stage
STAR Topology for cleaner sound
Bass Engine features:
low-pass digital crossover, 30-200 Hz, 24 dB/octave
variable subsonic filter (15-50 Hz in 5 Hz steps)
parametric EQ variable from 30-160 Hz
Bass Compensator enhances low-end definition
top-mounted digital control center with cover
time correction 0-10 milliseconds in 0.5ms steps
phase correction 0-180° selectable
digital readout
detachable front cover
blue power LED
delayed turn-on
speaker- and preamp-level inputs
gold-plated terminals
8-5/16"W x 2-11/16"H x 11-1/2"D (10"D without front cover
http://www.crutchfield.com/p_500MRDM300/Alpine-MRD-M300.html?search=MRDM300&tp=14
http://www.comparestoreprices.co.uk/images/al/alpine-mrd-m300.jpg
The other one is a 4/3/2 channel power amplifier #MRV-F340 $180 OBO
Details:
•55 watts RMS x 4 at 4 ohms
•65 watts RMS x 4 at 2 ohms
•130 watts RMS x 2 in bridged mode
•2-, 3-, or 4-channel output
•Tri-way capable (Tri-Way crossover required)
•requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
•Bass Engine® features:
◦variable 30-400 Hz high-pass/low-pass crossovers, 12 dB/octave
◦rear channels have a subsonic filter at 15 Hz
•MOSFET power supply
•STAR Topology (minimizes internal noise and prevents ground interference)
•speaker- and preamp-level inputs
•preamp outputs
•oversized power and ground connections
•gold-plated screw terminals
•top mounted controls with cover
•detachable front cover
•blue power LED
•10-3/8"W x 2-1/2"H x 12-3/8"D http://www.crutchfield.com/S-fFXB5hKZsHV/p_500MRVF340/Alpine-MRV-F340.html
http://www.gregfarz.com/private/d/4697-1/090824+Alpine+MRV-F340+01.jpg
The prices are best offer and i will sell each on its own thanks for looking
They are both V12 amps.
One is a Mono power amplifer # MRD-M300 $120 OBO
150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
MOSFET power supply and output stage
STAR Topology for cleaner sound
Bass Engine features:
low-pass digital crossover, 30-200 Hz, 24 dB/octave
variable subsonic filter (15-50 Hz in 5 Hz steps)
parametric EQ variable from 30-160 Hz
Bass Compensator enhances low-end definition
top-mounted digital control center with cover
time correction 0-10 milliseconds in 0.5ms steps
phase correction 0-180° selectable
digital readout
detachable front cover
blue power LED
delayed turn-on
speaker- and preamp-level inputs
gold-plated terminals
8-5/16"W x 2-11/16"H x 11-1/2"D (10"D without front cover
http://www.crutchfield.com/p_500MRDM300/Alpine-MRD-M300.html?search=MRDM300&tp=14
http://www.comparestoreprices.co.uk/images/al/alpine-mrd-m300.jpg
The other one is a 4/3/2 channel power amplifier #MRV-F340 $180 OBO
Details:
•55 watts RMS x 4 at 4 ohms
•65 watts RMS x 4 at 2 ohms
•130 watts RMS x 2 in bridged mode
•2-, 3-, or 4-channel output
•Tri-way capable (Tri-Way crossover required)
•requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
•Bass Engine® features:
◦variable 30-400 Hz high-pass/low-pass crossovers, 12 dB/octave
◦rear channels have a subsonic filter at 15 Hz
•MOSFET power supply
•STAR Topology (minimizes internal noise and prevents ground interference)
•speaker- and preamp-level inputs
•preamp outputs
•oversized power and ground connections
•gold-plated screw terminals
•top mounted controls with cover
•detachable front cover
•blue power LED
•10-3/8"W x 2-1/2"H x 12-3/8"D http://www.crutchfield.com/S-fFXB5hKZsHV/p_500MRVF340/Alpine-MRV-F340.html
http://www.gregfarz.com/private/d/4697-1/090824+Alpine+MRV-F340+01.jpg
The prices are best offer and i will sell each on its own thanks for looking