se7en
06-13-2011, 02:51 PM
I have a haltech e6x on my racecar.(300zx z32 chassis)
What I need to know is, I set my static timing via the Crank angle sensor, and then I setup the timing map in halwin(software for haltech), at any given point on the timing map, say 1000rpm and -14.7 psi vacuum, and I enter say 20 degrees...
ok, heres the ACTUAL question:
"is that 20 degrees total timing or 20 degrees PLUS 15 static??"
What I need to know is, I set my static timing via the Crank angle sensor, and then I setup the timing map in halwin(software for haltech), at any given point on the timing map, say 1000rpm and -14.7 psi vacuum, and I enter say 20 degrees...
ok, heres the ACTUAL question:
"is that 20 degrees total timing or 20 degrees PLUS 15 static??"