View Full Version : cutting rebar
Gorilla
11-23-2011, 04:17 PM
anyone have a tool that will allow me to cut rebar. I have 15ft rods that I would like to cut into 1ft. for Stakes ice rink boards
spacerz
11-23-2011, 04:31 PM
It's pretty simple actually, there are no special tools needed.
You can buy a cut off blade at your local rona/lowes/home depot and attatch it to a circular saw/chop saw/side grinder.
You could also use a sawzall with a metal blade, or if you are really darring you could break out the hack saw.
bspot
11-23-2011, 05:04 PM
Rebar cutters are nice to avoid iron filings everywhere.....
mr2mike
11-24-2011, 05:18 PM
Hit up totem in the evening, go to the yard and toss the guy running the gate a few bucks and see if they'll let you use their cutter. Better yet, do a coffee run for them. Probably 3 guys or so working $3 coffee... You're in it for around $10 for cutting.
heavyfuel
12-01-2011, 08:52 AM
Bolt cutters dude, no sparks, no power tools, done. If hyou have to buy a pair, IMO suck it up. Then when your wife chains up the front door or something else of value, it'll have been a worthwhile investment.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.