PDA

View Full Version : SR20DET parts compatiblility



africano
01-28-2004, 10:12 PM
Since there's a lot of SR owners on this site I just thought i'd ask if any other parts from a SR20DE, KA24DE, or any other engine for that matter would work on a SR20DET.

The reason I ask this is the fact that I'm considering the swap, but I don't want to buy routine things with express post from Japan.

Thanx any input will be greatly appreciated.

Idratherbsidewayz
01-28-2004, 10:20 PM
I am also curious, but only about one thing, i need a block heater on my SR, and am not sure which one to purchase. The SR20DE one? The guy at Brasso Nissan told me they were uncompatible, so im not sure anymore... Any help is greatly appreciated.

Hollywood
01-28-2004, 10:32 PM
All u need is your old components, plus the "FULL" sr engine, ecu tranni, harness, thats it. Anything else is easily fabible.

sxtasy
01-28-2004, 11:04 PM
Taken from NICO forums:
"T25 Turbo gaskets '90-'95 300ZX TT T25 gaskets (note turbo to O2 housing gasket dose not fit on S13 T25)

O2 sensor '87 300ZX Turbo

Ignitor chip '95 Q45

Fuel Injectors '95 300ZX TT (purple plugs)

Fuel Injector Seals '95 300ZXTT kit

MAF '89-'90 SOHC 240SX

Tranny rear main seal '93 240sx

Slave cylinder '93 240sx

T.O. bearing '93 240sx

Pilot bearing '93 240sx

Clutch 89 Nissan Maxima 240mm 9-7/16" spline 24x1

Belts (PS, AC, alt) Gates K050370 Alt. K040345 PS & AC

Spark Plugs NGK BKR7ES11 or BKR6 (hoter plug)

Coil Packs '90-'95 300ZX or '95 newer Maxima

S14 SR Oil Filter '95 Sentra SE-R

S13 SR Oil Filter '91 Sentra SE-R

Fuel filter '90 300zx TT

Front and Rear main seal '91 SE-R

TPS '95 KA TPS will work with some soldering

Temp sensor S13 or S14 (depending on chassis not motor) KA24DE temp sensor

Thermostat '91 Sentra SE-R

Radiator cap '90 300zx TT (slightly more pressure for better cooling over stock cap)

Knock sensor '95 240sx

Oil pressure sender '95 240sx

The only parts you really need to get from Japan are the starter, alternator, water pump, and headgasket. Most everything else can be found locally or adapted to fit."

Hollywood
01-28-2004, 11:15 PM
Keep in mind those are US parts.....some of the SE-R/200sx parts are different in Canada.

Idratherbsidewayz
01-29-2004, 12:01 AM
Anyone have any block heater info?

sxtasy
01-29-2004, 12:04 AM
www.240sx.org
go ask on the forums there
someone on those forums should know

africano
01-29-2004, 06:27 PM
thanx, sxtasy that help out alot