1/4 Mile Run!

[ls/vtec-crx]

I ran my new Type R on Friday and my best time was a 14.82@94mph.

What can i do to run a faster time, probably a 14.5 or 6.

Would race gas and advancing the timing help?

Does anyone have any 15" slicks?

:clap:

R/T .801
60' 2.222
330 6.194
1/8 9.511
MPH 74.57
1000 12.388
1/4 14.824
MPH 94.75

:clap:

[Ed the SOHC]

what is done to the teg now? If that's stock then you got mad skillz like voodoo child.

[ls/vtec-crx]

yah it's bone stock with a AEM CAI and Apexi N1 catback exhuast.

Eat my dust VOODOO CHILD! HEHEHEHE.

[rage2]

Go on a better night when the air is better :D. The elevation on friday night hovered around 4000ft-4600ft.

[max_boost]

Awesome time Alan!

Looks like we got more mad skillzz on the board!

[nookmumracing]

Project II You selling the CRX?
I want to check this baby out. Type-R is one of my favourite's especially the Champion White ones.

Peace

[Speed_RaSiR]

Dude, thats not bad at all for our elevation, stock figures for a 2k R are 14.8 at sea level. :burnout:

[ls/vtec-crx]

Originally posted by nookmumracing
Project II You selling the CRX?
I want to check this baby out. Type-R is one of my favourite's especially the Champion White ones.

Peace

My little brother is buying my CRX tryin to keep in the family but i got a new project now.

Does anybody know of anyone that can get Mugen MF-10 wheels in 16"?

[trendkill]

NICE. at least someone with a stock R can bust into the 14's

[infamous]

damn we got some quick cars on this board! congrats :thumbsup: :clap: :thumbsup:

[importadrenelin]

Race Gas & slicks will help, get some cam gears and tune it ..
Other then that thsoe times are sick on a R with 2 mods.

[ConVict]

im starting to find that for some reason natrually aspirated cars tend to do alot better at higher elevation then forced induction.. i know most of you knew this but im just so surprized...
i could never run even close to my stock 1/4 when i was stock..
maybe it is just mad skills...
nice 60' foot times for a street tire front wheel drive.. good job

[Ben]

Originally posted by ConVict
im starting to find that for some reason natrually aspirated cars tend to do alot better at higher elevation then forced induction.. i know most of you knew this but im just so surprized...
i could never run even close to my stock 1/4 when i was stock..
maybe it is just mad skills...
nice 60' foot times for a street tire front wheel drive.. good job

Say what? FI cars are not affected near as much as NA cars at higher elevation...

[Voodoo Child]

Oh here we go baby!
A voodoo curse will be laid on your head this friday Al!

14.87 for the Voodoo Child.
14.82 for the mini-me.

Goldmember, "Oh look, the little one can't take the hint...."

It's go time!!

Just so everyone's clear, we are both only running CAI and Apexi exhaust's.

NO Slicks Al! If you get some, I get one, you get the other!
:rofl: :rofl: :rofl:

[ls/vtec-crx]

Originally posted by Voodoo Child
Oh here we go baby!
A voodoo curse will be laid on your head this friday Al!

14.87 for the Voodoo Child.
14.82 for the mini-me.

Goldmember, "Oh look, the little one can't take the hint...."

It's go time!!

Just so everyone's clear, we are both only running CAI and Apexi exhaust's.

NO Slicks Al! If you get some, I get one, you get the other!
:rofl: :rofl: :rofl:

Oh now it's on my friend!
14.87 For the Voodoo Child
14.82 For the JDM PIMP

And i haven't seen the movie yet but i know this
"I Like Gold" GOLDMEMBER

How about i surprise you on Friday with what tires i will be running. But just come over on Wednesday and we will do some tuning.

1-For Allan
0-For Nate Dogg:thumbsdow HEHEHEHE

[shadowz]

Originally posted by ls/vtec-crx


Oh now it's on my friend!
14.87 For the Voodoo Child
14.82 For the JDM PIMP

And i haven't seen the movie yet but i know this
"I Like Gold" GOLDMEMBER

How about i surprise you on Friday with what tires i will be running. But just come over on Wednesday and we will do some tuning.

1-For Allan
0-For Nate Dogg:thumbsdow HEHEHEHE

Hahaha this'll be funny

[rage2]

ITR vs ITR. I'll bring the cameras! Let the trash talking begin!

[MrX]

Who has the Mad Skillz!!! Who will reign Champion!!

[max_boost]

I think we should try to get Raptor into this as well. He drives a Type-R but he has yet to break into the 14s although he is very close 15.1 I believe.

[90_Shelby]

Hey Calagui could I get in on the action J/K
14.8, thats quicker than my winter beater;)

In all serious good job, what happened with the CRX project?:dunno:

If you play with cam timing you'll get more out of it, should be good for another tenth or 2.

[Inzane]

"yah it's bone stock with a AEM CAI and Apexi N1 catback exhuast."

:banghead: :banghead:

Read what you just said. Stock means STOCK. You are not stock anymore. You now have a couple bolt-ons.




:thumbsup:

[ConVict]

ya stock in terms means from the factory, and BONE stock means you aint got shit...
i remember some guy saying, oh ya my bone stock laser runs 14.4 .. i called :bullshit: and he was like, well i have a boost controller and exhaust work...
well it aint stock
if you add a spark plug that adds 0.01 hp your not stock

sorry if this seems like im mad, or anything! im not, just saying you shouldnt call it stock

[Joe Malms]

Ya, I agree convict.
Now lets see your *not so bone stock* imaginary 600hp car

[CA18DET]

an intake and exhuast is basicly stock....


OH BOY 5 WHP! heha

[shadowz]

Originally posted by CA18DET
an intake and exhuast is basicly stock....


OH BOY 5 WHP! heha
PAULMAN YOU A FUNNY MAN, BUT SERIOUSLY , ITS BASCIALLY STOCK, INTAKE AND EXHAUST DONT REALLY DO JACK TO OUR CARS,

[Ekliptix]

They give me brain hp.

[RiceCake]

nice times! :thumbsup:

[ConVict]

Originally posted by Joe Malms
Ya, I agree convict.
Now lets see your *not so bone stock* imaginary 600hp car

dude dont talk before you know..

[B18C]

I wouldn't advance the timing on your ITR man. ignition timing can be a little tempermental and you may actually lose power. you'd have to strap it on a dyno to really tune the ignition - or any other part for that matter.

amazing times BTW :thumbsup:

[Voodoo Child]

Originally posted by ls/vtec-crx


Oh now it's on my friend!
14.87 For the Voodoo Child
14.82 For the JDM PIMP

And i haven't seen the movie yet but i know this
"I Like Gold" GOLDMEMBER

How about i surprise you on Friday with what tires i will be running. But just come over on Wednesday and we will do some tuning.

1-For Allan
0-For Nate Dogg:thumbsdow HEHEHEHE

So the JDM shrimp, sorry pimp ;), wants to do it the hard way hey! Well I'm game.
I'll be there Wednesday to take ownership of my new 10whp shift light too buddy!:rofl: :rofl: :rofl:
And because you have no A/C and weigh less than me, I'm taking everything out and just gonna sit on a milk crate with my seatbelt attached to me! :D :D :D

See I knew there was a reason why I didn't get the front end re-painted already, it's because I'll be going SO fast the paint is gonna come right off!!!!

Big Gay Al's Rhinoplasty - 1 (South Park reference)

Nate D. O. Double G - 1

Scores tied mofo!
:thumbsup:

[ls/vtec-crx]

Originally posted by 90_Shelby
Hey Calagui could I get in on the action J/K
14.8, thats quicker than my winter beater;)

In all serious good job, what happened with the CRX project?:dunno:

If you play with cam timing you'll get more out of it, should be good for another tenth or 2.

Well Hole Shot Racing (Hole Shit) did my ls/vtec which took
f*@king 6 months to build, why i don't know. I finally got it back and after two days of driving on the new motor piston 2 decides to literally explode. And remember i never took it above 4500rpm because i was breaking it in. And they were trying to blame it on me saying that i didn't tighten my timing belt. if i didn't tighten my timing belt all my valves would be bent. but they didn.t even take the head off to check they just suspected the valves were bent.

So i just decided to screw it and buy a new car cause my whole summer was ruined.

I warn people not to go to HOLE SHOT!

[ls/vtec-crx]

Originally posted by Inzane
"yah it's bone stock with a AEM CAI and Apexi N1 catback exhuast."

:banghead: :banghead:

Read what you just said. Stock means STOCK. You are not stock anymore. You now have a couple bolt-ons.





:thumbsup:

shiiiiiiiiiiiiiiiiiiiiiit! soooooooooooorrrrrry. damn getting a stick shoved up my a$$!!

[90_Shelby]

Originally posted by ls/vtec-crx


Well Hole Shot Racing (Hole Shit) did my ls/vtec which took
f*@king 6 months to build, why i don't know. I finally got it back and after two days of driving on the new motor piston 2 decides to literally explode. And remember i never took it above 4500rpm because i was breaking it in. And they were trying to blame it on me saying that i didn't tighten my timing belt. if i didn't tighten my timing belt all my valves would be bent. but they didn.t even take the head off to check they just suspected the valves were bent.

So i just decided to screw it and buy a new car cause my whole summer was ruined.

I warn people not to go to HOLE SHOT!

I'm not surprised we've had quite a few holeshot fuck ups or pissed off customers come to us looking for help.

[Joe Malms]

Originally posted by ConVict


dude dont talk before you know..

forgive my ignorance then
wheres the car and the 600hp?

[ConVict]

the car is at the mechanic shop, with the engine out!
at the moment, to the second update!
it is waiting for the bottom end to come back from the machine shop.03 over bored, new connecting rods, and low compression forged pistons... once that is back i already have my head p&p, my fulemanagment system and everything ready to go!
the reason it took so long ( 6 months ) is because i had problems finding jdm parts ( pistons )
which my mechanic acually found YESTERDAY

im not lieing about anything
anyone that doesnt believe me can call 256-9153 ask for Geff, and say you know the probe...( he will know exactly what your talking about )
he will tell you it will only put out 400+ whp , but thats because he doesnt know the stats on the engine and i do...

go ahead call em

[cocoabrova]

Nice run Al :thumbsup: Maybe I should lose the A/C, rear interior, and go on a diet :rolleyes: :rofl: My best run that night; 15.516 ET on my last run, but the MPH on this run was the best:
R/T: .938
60' : 2.536
330: 6.651
1/8: 10.070
MPH: 72.35
1000: 13.050
1/4 : 15.561
MPH: 92.03
Gotta work on my launching @7000+ RPM's :rofl: I dun think my clutch is gonna make it til the end of SS, so maybe I'll kill it off this Friday night :burnout: :rofl:
Maybe ALL the CW-ITR's will be out this Friday night :clap: :dunno: Raptor?? Where are ya hiding buddy??:rofl:

[James]

Originally posted by cocoabrova

Maybe ALL the CW-ITR's will be out this Friday night :clap: :dunno: Raptor?? Where are ya hiding buddy??:rofl:

Damn, what will that be, 4, 5??:dunno: too many CW-ITR's makes it confusing as to who is who!:nut: :thumbsup:

[Audi Kid]

conner.....people have been calling me asking for geff! wtf?!?! :rofl:

[ConVict]

thanks Mike .. um i mean Geff, keep up the good work :thumbsup:

[max_boost]

Originally posted by cocoabrova
Nice run Al :thumbsup: Maybe I should lose the A/C, rear interior, and go on a diet :rolleyes: :rofl: My best run that night; 15.516 ET on my last run, but the MPH on this run was the best:
R/T: .938
60' : 2.536
330: 6.651
1/8: 10.070
MPH: 72.35
1000: 13.050
1/4 : 15.561
MPH: 92.03
Gotta work on my launching @7000+ RPM's :rofl: I dun think my clutch is gonna make it til the end of SS, so maybe I'll kill it off this Friday night :burnout: :rofl:
Maybe ALL the CW-ITR's will be out this Friday night :clap: :dunno: Raptor?? Where are ya hiding buddy??:rofl:

Time to polish up the madd skillzz!!
The other R boyz are into the 14s!:thumbsup:

[THREE40SEVEN]

is this at racecity or budpark?

[ninjak84]

JDM parts on a probe?

[James]

Originally posted by ninjak84
JDM parts on a probe?

He Has the Japanese Engine or something like that,
Mazda MX-6=Ford Probe, Same shit.

[ls/vtec-crx]

Originally posted by James


Damn, what will that be, 4, 5??:dunno: too many CW-ITR's makes it confusing as to who is who!:nut: :thumbsup:

You guys will know who i am cause i'm the only one with the stock wheels painted gunmetal.

I'm going to be runnin half a tank of race gas and advancing the timing probably about 2 degrees.
I'm hoping to run a 14.6 but we will see how the track conditions are.

[importadrenelin]

Originally posted by cocoabrova
Nice run Al :thumbsup: Maybe I should lose the A/C, rear interior, and go on a diet :rolleyes: :rofl: My best run that night; 15.516 ET on my last run, but the MPH on this run was the best:
R/T: .938
60' : 2.536
330: 6.651
1/8: 10.070
MPH: 72.35
1000: 13.050
1/4 : 15.561
MPH: 92.03
Gotta work on my launching @7000+ RPM's :rofl: I dun think my clutch is gonna make it til the end of SS, so maybe I'll kill it off this Friday night :burnout: :rofl:
Maybe ALL the CW-ITR's will be out this Friday night :clap: :dunno: Raptor?? Where are ya hiding buddy??:rofl:

cocoabravo- don't worry you'll get better. you ran same times when ? I first got my Type R.. Best I ran in the Type R Bone Stock was 15.3, I believe raptor hit 15.2 bone stock with semi-stripped interior.
Also try a laucn maybe around 4700-5000 RPM and slip the clutch, don't dump it. Your 60ft will improve along with your times.

[legendboy]

Originally posted by importadrenelin


cocoabravo- don't worry you'll get better. you ran same times when ? I first got my Type R.. Best I ran in the Type R Bone Stock was 15.3, I believe raptor hit 15.2 bone stock with semi-stripped interior.
Also try a laucn maybe around 4700-5000 RPM and slip the clutch, don't dump it. Your 60ft will improve along with your times.

cocoabrova's biggest problem is his tires.

[importadrenelin]

If the tires are gone, then all hope is lost.
Case & Point our Supra. Best at SS was 13.9, street tires and horrible launches ala my driving.

[legendboy]

He's running the stock michlen tires that come on the gs and gsr.....I run the same tires and their ass for drag racing, even if u let the air out of em!:rofl:

[ls/vtec-crx]

Originally posted by importadrenelin


cocoabravo- don't worry you'll get better. you ran same times when ? I first got my Type R.. Best I ran in the Type R Bone Stock was 15.3, I believe raptor hit 15.2 bone stock with semi-stripped interior.
Also try a laucn maybe around 4700-5000 RPM and slip the clutch, don't dump it. Your 60ft will improve along with your times.

AL here's my advice to you if you slip the clutch you will get worse 60 foot times and especially launching it at 4700-5000 you will just bog and not go nowhere. It doesn't have forced induction it's an N/A car.
My buddy was running the same tires as you and he was getting 2.2 60 foot times which is good. It also depends if the track is good or not.(weather conditions)
I was launching at 7000 and dumping the clutch and it was still kind of bogging. But i was getting 2.2 60 foots.
Come meet me there tonight and we'll see what we can do.

[ls/vtec-crx]

Originally posted by legendboy
He's running the stock michlen tires that come on the gs and gsr.....I run the same tires and their ass for drag racing, even if u let the air out of em!:rofl:

Those tires actually aren't bad on the track my best 60 foot times were with tires. You can't expect anything better than a 2.2 on stock tires, it's a front wheel drive car.

Even with Yokohama A032R the best times we got out of those was 2.1 and then i busted my tranny the fourth run.

If you wanna run anything lower than a 2.1 60 foot get slick's and you'll 1.8 like Brad.

[Voodoo Child]

Coco buddy,

I've read two different methods with our ITR's.
You can either launch between 4500-5500 and feather the clutch and once it engages, you floor the bastard; or you can dump like Al sais at high rpm's.
I've only ever tried the first way so tonight I too am going to do a few 7K+ dumps. I've hit 2.2's for the most part the other way so I'm curious to see if I can get it a bit lower.

Good luck

VC:thumbsup:

[legendboy]

take advantage of LSD with a high rev launch

[cocoabrova]

Hey Al/Nate/Jason/Corey-thanks for the advice..... I think I'm gonna start a support group for ITR drivers w/ bad 60' times, and you guys can be our counsellors :rofl: :rofl: Well, I'll try and make it out tonight, but my rubber is not bad cuz they're XGT4's, they're bad cuz they're past the indicator on the insides and the r/f has tread separation with a nice bulge :thumbsdow With my 92mph last week, I know I can get into the low 15's/high 14's. I might run slicks when I go next Friday or I'm gonna have new rubber all around, so it's gonna be brought-en JDMpimp and Nate D-O double G:burnout: :burnout: As for tonight, I'll prolly just be the token ITR MALE cheerleader.... :woot: :woot: :rofl: