Hash_man
11-26-2012, 02:16 PM
Looking to sell my STEG Master Stroke MSK 3000 2-channel class A/B amplifier. I was going to put it in one of my cars but decided I could use the cash for the holidays instead.
Specs on amp:
At the time of stereo 4Ω rated output (power supply voltage 11 - 14V)
400W×2 RMS
At the time of stereo 2Ω rated output (power supply voltage 11 - 14V)
800W×2 RMS
At the time of monaural 4Ω rated output (power supply voltage 11 - 14V)
1,600W×1 RMS
Full A class mode -
Frequency characteristic
10Hz - 80kHz
Distortion factor ratio (stereo 4Ω installed capacity and 1kHz)
Under 0.02%
Cross modulation distortion factor
Under 0.02%
signal-noise ratio (A weight)
Above 97dB (above 100dB)
Damping factor (4Ω and 1kHz)
200 or more
Input sensitivity
0.5 - 5V
Input impedance
Above 11kΩ
Operating voltage
10.5 - 16V
Largest electric current (at the time of 4Ω)
108A
Largest electric current (at the time of 2Ω)
220A
Largest electric current (at the time of 2Ω)
-
Idling electric current
3A
Crossover High/low/flat/[ha] ゙ [nto] ゙
Crossover AQXM module
22Hz - 8.5kHz
Channel separation
70dB
Bass Boost
40 - 120Hz/0 - 12dB
Fuse
150A (attachment and external)
Weight
9.5kg
Size (W×H×D)
620×60×255mm
Amp retailed for around $7500 new, I am asking $1100.
Specs on amp:
At the time of stereo 4Ω rated output (power supply voltage 11 - 14V)
400W×2 RMS
At the time of stereo 2Ω rated output (power supply voltage 11 - 14V)
800W×2 RMS
At the time of monaural 4Ω rated output (power supply voltage 11 - 14V)
1,600W×1 RMS
Full A class mode -
Frequency characteristic
10Hz - 80kHz
Distortion factor ratio (stereo 4Ω installed capacity and 1kHz)
Under 0.02%
Cross modulation distortion factor
Under 0.02%
signal-noise ratio (A weight)
Above 97dB (above 100dB)
Damping factor (4Ω and 1kHz)
200 or more
Input sensitivity
0.5 - 5V
Input impedance
Above 11kΩ
Operating voltage
10.5 - 16V
Largest electric current (at the time of 4Ω)
108A
Largest electric current (at the time of 2Ω)
220A
Largest electric current (at the time of 2Ω)
-
Idling electric current
3A
Crossover High/low/flat/[ha] ゙ [nto] ゙
Crossover AQXM module
22Hz - 8.5kHz
Channel separation
70dB
Bass Boost
40 - 120Hz/0 - 12dB
Fuse
150A (attachment and external)
Weight
9.5kg
Size (W×H×D)
620×60×255mm
Amp retailed for around $7500 new, I am asking $1100.