LF: DSM go fast parts

[380gnsx]

Looking for some parts to build the talon up for the holset HX35. It's an AWD, and I looking for the following:
3" exhaust with downpipe
Fmic setup
Suspension (shocks/struts, coilovers, lowering springs)
Bigger injectors than stock 450's
Engine management (dsmlink etc)
Anything that you feel may be beneficial to the build.

Feel free to message me with what you have and what you want for it.
Thanks ahead of time and thanks for looking.

[s3v3n]

I've got some stuff...

MAFT-Pro engine management
-can ditch the stock MAS and run a GM MAF or can run SPEED DENSITY with this
-fuel control
-timing control
-boost control
-meth or nitrous control etc
-has LCD screen for real-time data display
-can be programmed/tuned via the LCD screen or can be connected to laptop for tuning

GReddy Emanage Ultimate engine management
-can run speed density
-full timing and fuel control
-tuning via laptop and included software
-can interface with greddy gauges, e01 and profec units
-loads of other features

Also have:
-180gph denso drop in fuel pump
-3" exhaust piping u-bends (mandrel bent)
-2.5 in/out mufflers
-valve cover
-huge vertical fmic core (needs minor tank mod)
-valve cover breather filter
-cone air filters
-CF (real) gauge pods
-60mm GReddy peak/warn/hold electronic gauges with controllers


I have more stuff, but that's off the top of my head... some dsm specific and some universal.

Lemme know if you're interested in anything :thumbsup: