PDA

View Full Version : 97 eclipse spyder engin swap


Gord Kerik
03-02-2004, 08:59 PM
I have a 97 eclipse spyder with a 2.4L engine i am thinking of swapping in a 4G63 turbo i was wondering if any one knows of any DSM shops in Alberta
boostedDsm
03-02-2004, 09:58 PM
speedville, they do lots of dsm stuff, i thunk there is like 4 of them in there right now. including my eclipse.
EK 2.0
03-02-2004, 10:13 PM
Originally posted by Gord Kerik
I have a 97 eclipse spyder with a 2.4L engine i am thinking of swapping in a 4G63 turbo i was wondering if any one knows of any DSM shops in Alberta


Edmonton has Revolution Motorsports...


The owner Ron is a nice guy and has a wicked fast 2G
ninspeed
03-02-2004, 10:32 PM
63/64 :D why have 2.0l when you can have 2.4l of turboed dsm power?
EK 2.0
03-02-2004, 11:33 PM
Originally posted by ninspeed
63/64 :D why have 2.0l when you can have 2.4l of turboed dsm power?


Why you ask??...see my signature Rob...:D
boostedDsm
03-03-2004, 03:52 PM
DSM...Making mechanics out of ordinary people since 1989"

nice nice:thumbsup: :thumbsup: how true it is!!
EK 2.0
03-03-2004, 03:53 PM
Originally posted by boostedDsm
DSM...Making mechanics out of ordinary people since 1989"

nice nice:thumbsup: :thumbsup: how true it is!!


And no one knows this more than I having owned 3 of them in my time on the streets...
boostedDsm
03-03-2004, 08:28 PM
i think i've had 3 at once, i keep rotating 2 of them in the shop!
white_dsm
03-04-2004, 03:18 PM
Originally posted by CycloneAWD



And no one knows this more than I having owned 3 of them in my time on the streets...

I've had two, so you barely got me beat.

As per original post, I would suggest E-squared performance, that's unless you like spending lots of money then got to Impressions.:rolleyes:
EK 2.0
03-04-2004, 03:38 PM
Originally posted by white_dsm


I've had two, so you barely got me beat.

As per original post, I would suggest E-squared performance, that's unless you like spending lots of money then got to Impressions.:rolleyes:


I didnt think Eli and Eric were doing engine swaps...but if they are...

E-Squared are for sure the folks to talk to, they do A LOT of work for the Calgary DSM members...myself included...
white_dsm
03-04-2004, 03:43 PM
Originally posted by CycloneAWD



I didnt think Eli and Eric were doing engine swaps...but if they are...

E-Squared are for sure the folks to talk to, they do A LOT of work for the Calgary DSM members...myself included...

Eli is busy losing his phone these days, which makes it a nightmare right now...but I will probably get them to throw on my new goodies:D

You wouldn't know anyone/anywhere I could get an egr blockoff plate done hey? I've changed, the isc, pop can egr block off, checked all vacuum lines, checked the TB and the thing still surges on me.:banghead:
EK 2.0
03-04-2004, 03:47 PM
Sorry for stealing the thread...


But lucky me I have the JDM intake so i dont have an EGR...But, Will off of the Calg DSM board was making them for a while...PM him, he might know how to help you out more...
white_dsm
03-04-2004, 04:46 PM
I tried Will, he isn't making them anymore.

So with an aftermarket egr, you can get rid of the egr???

Sorry about the thread hijacking:(
heavyD
03-08-2004, 08:36 AM
Originally posted by Gord Kerik
I have a 97 eclipse spyder with a 2.4L engine i am thinking of swapping in a 4G63 turbo i was wondering if any one knows of any DSM shops in Alberta

Al at Speedville has worked on alot of DSM's. That's where I take mine and there are always a couple there getting worked on. He is pretty affordable too.:thumbsup: