PDA

View Full Version : FS: Satin Black 1992 Honda Civic Hatchback JDM B16A Swap w/ RECARO's



mitch667
10-20-2014, 07:29 PM
Vehicle Details
Year : 1992
Make and Model : Honda Civic
Exterior Color : Satin Black
Interior Color : Black
Auto or Manual? : Manual
Odometer Reading : 160,xxx on motor
Location of Vehicle : NW Calgary
Asking Price: $4000 O.B.O

Contact Information

Phone: (403) 462-2682

Description :

Up for sale is my 1992 Honda civic hatchback. It’s going to be sad to let this car go as I have owned it for almost 5 years. Motor has around 160,000 KM and the body closer to 280,000 km. Most vehicle components are new however.

If interested, text me at (403) 462-2682

The car has many rare parts as well as performance parts. The body is stock over all, and is vinyl wrapped with satin black vinyl. Here is a list of parts the car contains:

Engine:

-JDM B16A, had around 90,000 km when I bought the car from the last owner, and have since put around 70,000 km on it. ONLY used MOTUL Full Synthetic 5W30 oil

-New genuine Honda timing belt, tensioner, and water pump installed around 50,000km ago. Still has a lot of life left!

-polyurethane engine mounts
-Stage 1 clutch

Engine is running SUPER SMOOTH, I have babied the motor. VTEC hits hard! Burns NO oil. Transmission is also very smooth, NO grinds!

Suspension:

-K-sport Coilovers
-TruHart Front & Rear Camber kit
-TruHart Roll center adjusters
-TruHart Toe Links
-All bushings are polyurethane (Energy Suspension) including rear trailing arms
-ASR sub brace
-Beaks rear lower tie bar
-Integra front 22mm sway bar
-JDM ITR rear 23mm sway bar
-Rear upper strut tower bar
-front upper strut tower bar

Cooling:

-Mishimoto Aluminum half rad, dual core
-BLOX red 12" Slim fan setup in a "Pusher" Style
-GReddy Cooling plate
-Red silicon rad hoses

Brakes & Spindles:

-JDM 96 spec ITR 4x114.3mm spindle conversion
-JDM 96 spec ITR front & rear disc brakes. New pads rear, front 70%
-JDM ACRE stainless steel braided brake lines
-JDM ITR 15/16" Brake Master Cylinder
-Extended rear studs
-Rear 20mm ICHIBA hub centric spacers

Exhaust:

-RARE JDM 98 spec 4-1 ITR headers
-JDM Fujisubo Legalis R Catback
-Catalytic converter delete, replaced with high flow resonator

Sounds clean, not ricer

Body:

Stock over all
-OEM SI front lip
-JDM side markers
-Amber corner lights
-Morimoto 3.0 FX-R D2S Projector retrofit headlights
-55W ballast, Morimoto 4300K bulbs
-Rare OEM JDM eg6 STANLEY Foglights
-JDM Long LED Duckbil Spoiler OEM
-Light window tint
-Red HELLA Horns

Interior:

-DC Integra Seats, No tears
-S2K digital instrument cluster
-Pro-sport Water Temp gauge
-JDM C's Short Throw Shifter
-VERY RARE JDM Integra Type-RX Pedals, OEM part
-JVC USB deck
-Front & Rear speakers
-Pre-wired for subs

Wheels/Tires:

-Accord wheels painted bronze
-General Altimax Artic Tires, two with about 50% in rear, two with 70% front


Car runs and handles great! Especially on corners!
Motor runs excellent!
S2K cluster is very nice!


The cons:

Neighbor backed into the front of the car, has some marks on the bumper and hood as a result. Rear quarter panels are rusting.
-------------------------------------------------------------
This is an excellent car, and I hate to see it go, but my schooling is more important than my car, so it’s time to sell. The VIN number is a British Columbia VIN, but this car is FULLY registered in Alberta with clean title (As I said, I have owned this car for almost 5 years). I have been driving this car mainly during the spring/summer, and rarely in winter unless it’s an emergency.

The pictures and description above is pretty clear! Please DO NOT waste my time with low ball offers. LOW BALLERS WILL BE IGNORED. The parts all around this car is far worth more than the asking price.

Price is O.B.O, I will not negotiate until you have personally viewed the car! DO NOT try to give me offers before seeing the car.

Extras :

I have extras as well, extra hood, bumper, vinyl wrap and new all-weather car cover. I also have a very nice set of JDM 96 spec ITR championship white wheels with like new TOYO PROXES R1R tires. Willing to throw them in for an additional cost.



Pictures :

http://i883.photobucket.com/albums/ac31/mitch667/IMG_6519_zpsog2ohpss.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_6522_zpsjfgnjwrf.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_6523_zpsoea5k3ig.jpg
http://i883.photobucket.com/albums/ac31/mitch667/DSC_5540_zpsvjbkvquv.jpg
http://i883.photobucket.com/albums/ac31/mitch667/DSC07605_zpsy5hfifcs.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5702_zps0458d9ec.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5715_zpsfa3c0d1a.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5716_zps1e211ec9.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5717_zpseb47d837.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5718_zps66c0a02f.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5730_zpsb8d15c92.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5928_zpse2d16f2f.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5721_zps425fefe8.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5727_zpsa6fa7ca1.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5703_zpsb8f9e661.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5700_zps578297cb.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5925_zpsb4f9c564.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5926_zpsdf9f1ded.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5733_zps1f4b3259.jpg
http://i883.photobucket.com/albums/ac31/mitch667/IMG_5924_zps91588a44.jpg

whiteboy87
10-20-2014, 07:52 PM
price?

mitch667
10-20-2014, 08:03 PM
Yes, updated, thanks for that!

mitch667
10-21-2014, 02:19 PM
As I have mentioned above, I will be giving these extras with the car:

1. Used hood, nicely painted gloss black on underside, and was working on filling one dent before originally vinyl wrapping it.

2. Used bumper, has some light scrapes, was going to originally smooth-en these out and vinyl wrap it.

3. 5ft wide by 20ft long roll of satin black vinyl
4. Eight (8) green JDM HAMP oil filters NEW imported from JAPAN
5. All weather car cover NEW
6. Spare purple BEAKS lower tie bar (missing one mounting bracket)
7. Extra Timken front wheel bearing NEW
8. Extra OEM seals for the B16 motor
9. OEM JDM Heat shield for the 98spec ITR headers
10. whatever else you see in this photo, there is more...


http://i883.photobucket.com/albums/ac31/mitch667/459DBB96-4FBD-46F7-8DFF-2EAF31FD655B_zpsuqcq1hkf.jpg
http://i883.photobucket.com/albums/ac31/mitch667/70450F81-A87D-4EAC-A6CF-22F298514CA0_zps2zq9nj3q.jpg
http://i883.photobucket.com/albums/ac31/mitch667/E3C9C17C-60BC-4237-A27F-E8A013244B74_zpsbn1euzgf.jpg
http://i883.photobucket.com/albums/ac31/mitch667/4FE69E2F-85D6-4FD8-9F4F-B94B7BADAFC0_zpsphc0ydgk.jpg
http://i883.photobucket.com/albums/ac31/mitch667/8CCB59D1-5699-4AFD-B567-23755ACF7E8E_zpsu32djwpu.jpg

mitch667
10-25-2014, 10:22 AM
I have also done a compression test a few days ago, here are the results for cylinders left to right:

158, 158, 158, 155 all in PSI, and all from a COLD start. Excellent compression results!

http://i883.photobucket.com/albums/ac31/mitch667/1511C426-930D-4F62-A338-8C9C10450A17_zpsq6kdljvt.jpg
http://i883.photobucket.com/albums/ac31/mitch667/7AFDB577-412A-4818-BFB6-12A3A15E98F3_zpsswndz9a8.jpg
http://i883.photobucket.com/albums/ac31/mitch667/B87DBD89-AEFF-4837-AF0B-26450BA7B9A2_zpsrirvax7l.jpg
http://i883.photobucket.com/albums/ac31/mitch667/862A9FAA-D1C5-44B4-88C0-1BF0E7D64EB1_zpsdow06huq.jpg

mitch667
11-03-2014, 06:34 PM
BUMP!

mitch667
11-06-2014, 09:05 PM
I have swapped the seats out with DC Integra seats instead of the Recaros. Price has been DROPPED $4000 O.B.O

mitch667
11-20-2014, 09:46 PM
BUMP!!

mitch667
12-03-2014, 05:42 PM
I will likely hold onto this car and re-post it for sale in March or April. Thanks for the interest beyond!

mitch667
02-01-2015, 01:01 AM
BUMP!

Back up for sale, added a few more photos