XES turbo prelude for SALE (>500whp)

[XES]

92 Honda Prelude

http://www.cadvision.com/unrynhen/sjuly2002fs.jpg http://www.cadvision.com/unrynhen/sjuly2002r.jpg http://www.cadvision.com/unrynhen/sjuly2002ep.jpg

Complete, Full Built Race/Street Car. Includes a spare F22 motor, 4 stock wheels, Mickey Thompson slicks and the following:

Engine Modifications

H23A (non-VTEC)
Fully built motor

Custom Turbonetics 62-1 turbocharger (polished)

JE oversize pistons
Saenz connecting rods
Speed Sport Racing ductile iron sleeves
Blueprinted and balancing bottom end
Balancing shafts removed
Custom exhaust manifold and 3" mandrel bent downpipe

JG engine dynamics oversize stainless steel valves with titanium retainers
Speed Sport Racing turbo-grind camshafts
Speed Sport Racing throttle body
Custom head porting and polishing

Hondata engine management system (Stage 4B)
RC injectors - 720 cc/min
MSD 6AL ignition w/ MSD HVC coil
AEM pulleys
Holley in-tank and in-line fuel pumps

ACT clutch kit with LSD
SSR 3" mandrel bent stainless steel exhaust with Apexi turbo N1 muffler
Powerslot rotors with Hawk pads

Apexi GTR intercooler with custom endtanks & intercooler piping
Greddy Type-R Blow-off valve
Turbonetics Racegate wastegate
Guyon Racing twin pass, 2 core aluminum radiator
FAL fan, etc.

Exterior and Interior Modifications

Real lexus IS300 taillights
JDM one-piece headlights
Custom Hiro front lip
VIS Racing side skirts
Custom rear bumper (from a VIS racing extreme rear)
Vented hood
New Granada Black Pearl paint

17" Enkei Katana wheels with Yokohama Parada tires (on street)
15" Honda Prelude wheels with Mickey Thompson 22*8*15 drag slicks (for track)

Accord type-R side marker lights
Various other mods (shaved emblems, clear lights, etc.)
Lowered, front/rear tower bars added
Z-Speed fron/rear tow hooks

Custom interior and aluminum panels
Apexi AVC-R boost comtroller
Autometer 5" tach with shift light, A/F ratio, EGT, boost, fuel pressure,
oil temp, oil pressure, water temp and voltage gauges
Blitz dual turbo timer
Sparco Rev seat with 3" RCI 5-point harness
Sony tape deck with stock front 4 speakers (rear speakers removed)
Sparco pedals, Momo shift knob
Wink 5-panel rear view mirror
SPA design side mirrors
OMP F360 swede removable steering wheel
etc.

Performance to date on current setup (Sept 2002)

Dyno tested at 22-24lbs of boost on a Mustang MD250 Chassis Dyno:
491.2 wheel hp @ 7000rpm and 401.4 ft/lb torque @ 5900rpm

(DynoJet values expected - 530.5 - 550.1 whp & 433.5 - 449.6 ft-lbs torque)
(Flywheel expected values - >650 hp & 550ft-lbs torque)

Best E.T. = 12.3 @ 109mph
Best mph = 12.5 @ 118mph

Both runs were at 17psi & 3700feet (full interior)


Vehicle is in show condition, and runs better than the day it was built. Featured in Performance Auto & Sound mag, and soon to be seen in Super Street Mag. Over $50000 invested. Chassis has 80,000miles (130,000km) on it, while the fully built motor has ~1000miles (1500km) on it.

Traction will put the car into the 10's (It currently is not equipped with a LSD) with full interior.

Asking $45,000canadian or $28,000US. Serious offers also considered.

e-mail for more info: [email protected]

[ecstasy_civic]

didnt think id ever see that car for sale.
wow!

[Synergy]

You should part it. 50g's for a 92 prelude is not realistic IMO.

[Audi Kid]

a prelude that runs 10's? uhhh......

[boi-alien]

Originally posted by Audi Kid
a prelude that runs 10's? uhhh......

2 seconds off there =) 12s hehe

[Audi Kid]

Traction will put the car into the 10's (It currently is not equipped with a LSD) with full interior.

[Impreza]

i wanna see that!! a prelude in the 10s...that would be nice...

[4G63Power]

Another sweet car for sale...sad to see all these cars being up for grabs :dunno:

[buh_buh]

Originally posted by Audi Kid
Traction will put the car into the 10's (It currently is not equipped with a LSD) with full interior.
interior and LSD will not take 2 seconds off a 1/4 mile time.

[SpoonEK9@STRD]

the car could run tens with its current set up... just needs bigger slicks.

[rage2]

Originally posted by buh_buh
interior and LSD will not take 2 seconds off a 1/4 mile time.

Actually, if Brad didn't let off on the first 2 runs that one night, he would've been comfortably in the 11's. That's at 17psi boost (he runs like 23psi or something now). I dunno if there's enough traction to get him into the 10's though...

[Ben]

Damn nice car man, is thier a reason you are selling after all that time money, and energy invested?

[mr.boost]

Why are you selling your car????

[shadowz]

It was eventual, I think XES is sick of playing around with his car and having to spend so much money to get his car where is has gotten, I think whomever buys this car will be very happy with the total package he has put together

[XES]

Well, im finally finished doing pretty much everything to the vehicle (besides a VTEC head and some heavy duty drivetrain work).

Hoping to start on a new project car (not sure quite what yet).

...and the money is a little tight.


Here's your chance to buy a full built, tuned, proven motor/vehicle.


__________________
XES

H23A turbo
491whp & 401ft-lbs on Mustang dyno
12.3@109mph & 12.5@118mph @17psi with full interior

[syeve]

I KNOW that car will run 10's...he has a trap of 118MPH with no LSD and tiny slicks...even if you ajust for altitude on his current runs he would be in the 11's easy...(just take it to vancouver) and you'll see. I've been in the car at 18psi and I was scared for my life...seriously. It can rip the tires out at over 100 KMs an hour in third, and could be taken staight on a road course (if brad could drive). This car in my opinion is the best car you can buy for 50k. With the spare F22 you can drive it all winter too. The car is in perfect cond. Sorry to see it go.

[XES]

Price has been altered to $45,000Can or 28,000US. Serious offers will also be considered.

[choweyt3t4]

ill trade you my 3rd gen straight across j/k.hmmmm im going to have to come up with some plan to get me cashola.

[ancient]

Brad mind if I ask you, where you got your block bored/honed..... Im currently looking for a shop that can bore H series blocks (FRM Coating) None of the places in town have the proper equipment im told.....


Thanks in advance.

[shadowz]

Out of town dude

[ninjak84]

gorgeous prelude, nicely done!
i would think once you finish a car, you would want to enjoy it. on the other hand, new challenges can be just as fun and educational i suppose. and that thing probably attracts speeding tickets like crazy!

[ancient]

Damn.... Anyone know of any shops that can do that ?

[Synergy]

Your car is nice but for 45g's you can't even go to the movies with that car because leaving it outside unattended is too risky with all the import break-ins lately.