HiSpec
06-30-2016, 12:20 AM
Finally got around to write a review for a couple OBSSSSD products I got from Auto Obsessed. This review is dedicated for their wheel cleaner (http://autoobsessed.com/shop/obssssd-tire-satin-finish-16oz-p-2440.html).
OBSSSSD Tire Satin
Product Description: (Auto Obsessed)
OBSSSSD™ Tire Satin Finish is a water-based tire dressing consisting of hydrating, gloss enhancing and preservative agents. It replaces moisture lost from the rubber compound and protects the surface from the discoloration and cracking caused by ultraviolet radiation. OBSSSSD™ Tire Satin Finish is dry to the touch and leaves a deep black satin finish.
This product is ECO Friendly, Bio-degradable, and VOC compliant.
https://c5.staticflickr.com/8/7596/27889657572_954899a268_c.jpg
Handling:
Distinctive but typical exterior dressing smell. Just like other OBSSSSD products, the handle and the trigger was a pleasure to use.
Usage:
The tires were just like the wheels. Extremely filthy and was caked with petroleum based tire dressing.
This is what the tires looked like while scrubbing them!!
https://c2.staticflickr.com/8/7494/27377889393_aaafb16057_c.jpg
Tools:
- Frank Scrub Brush
- Curved foam applicator from Daiso
- Zepp's Purple Degreaser
Direction:
As per Auto Obsessed
1. Spray a small amount of OBSSSSD™ Tire Satin to an applicator or brush.
2. Evenly apply OBSSSSD™ Tire Satin across the surface of the tire.
3. Allow product to soak into tire or remove any excess product with a microfiber cloth.
Performance with A/B Comparison:
"A little goes a long way" - A common quote from any experienced detailer
Apply a thin layer. Let the product absorb. Apply additional layers as need to achieve desired shine.
Immediately after applied (Only one layer was applied)
https://c4.staticflickr.com/8/7284/27991968355_03ff8328c2_c.jpg
After 3 minutes
https://c2.staticflickr.com/8/7446/27377890153_9aa1d463df_c.jpg
Barely any difference after 3 minutes!
Costs per Application:
I ran into an issue where the product was quickly absorbed by the foam applicator and was running down my hand. But I believe using a denser and less airy foam applicator or if the product was slightly thicker will make this product even easier to use!!
Overall, I applied about 5 squirts onto the applicator. Just enough to cover the width of the sidewall. Felt like I barely used any but with the adjustment, I probably can get away with 3 squirts per tire. A bottle will definitely last quite a while.
Conclusion:
For the past few years, I've been using this special tire dressing concoction from Autowerkes Exclusive. But I think I found a replacement product! I can easily tailor the shine to my liking by applying multiple layers. Also, since it is a water-based product, it'll be easy to wash off without having to scrub. More importantly, it won't fling off the tires like petroleum based products!!
Pros:
- Great handle and trigger design
- Deep low gloss
- Easily tailor the shine to one's liking
Cons:
- Slightly watery/runny on the consistency
OBSSSSD Tire Satin
Product Description: (Auto Obsessed)
OBSSSSD™ Tire Satin Finish is a water-based tire dressing consisting of hydrating, gloss enhancing and preservative agents. It replaces moisture lost from the rubber compound and protects the surface from the discoloration and cracking caused by ultraviolet radiation. OBSSSSD™ Tire Satin Finish is dry to the touch and leaves a deep black satin finish.
This product is ECO Friendly, Bio-degradable, and VOC compliant.
https://c5.staticflickr.com/8/7596/27889657572_954899a268_c.jpg
Handling:
Distinctive but typical exterior dressing smell. Just like other OBSSSSD products, the handle and the trigger was a pleasure to use.
Usage:
The tires were just like the wheels. Extremely filthy and was caked with petroleum based tire dressing.
This is what the tires looked like while scrubbing them!!
https://c2.staticflickr.com/8/7494/27377889393_aaafb16057_c.jpg
Tools:
- Frank Scrub Brush
- Curved foam applicator from Daiso
- Zepp's Purple Degreaser
Direction:
As per Auto Obsessed
1. Spray a small amount of OBSSSSD™ Tire Satin to an applicator or brush.
2. Evenly apply OBSSSSD™ Tire Satin across the surface of the tire.
3. Allow product to soak into tire or remove any excess product with a microfiber cloth.
Performance with A/B Comparison:
"A little goes a long way" - A common quote from any experienced detailer
Apply a thin layer. Let the product absorb. Apply additional layers as need to achieve desired shine.
Immediately after applied (Only one layer was applied)
https://c4.staticflickr.com/8/7284/27991968355_03ff8328c2_c.jpg
After 3 minutes
https://c2.staticflickr.com/8/7446/27377890153_9aa1d463df_c.jpg
Barely any difference after 3 minutes!
Costs per Application:
I ran into an issue where the product was quickly absorbed by the foam applicator and was running down my hand. But I believe using a denser and less airy foam applicator or if the product was slightly thicker will make this product even easier to use!!
Overall, I applied about 5 squirts onto the applicator. Just enough to cover the width of the sidewall. Felt like I barely used any but with the adjustment, I probably can get away with 3 squirts per tire. A bottle will definitely last quite a while.
Conclusion:
For the past few years, I've been using this special tire dressing concoction from Autowerkes Exclusive. But I think I found a replacement product! I can easily tailor the shine to my liking by applying multiple layers. Also, since it is a water-based product, it'll be easy to wash off without having to scrub. More importantly, it won't fling off the tires like petroleum based products!!
Pros:
- Great handle and trigger design
- Deep low gloss
- Easily tailor the shine to one's liking
Cons:
- Slightly watery/runny on the consistency