Danaldson
09-14-2017, 09:54 AM
Honda Ruckus GY6
Year : 2003
Exterior Color : Tiffany Blue
Odometer Reading : 500km on the 150cc, 4000km on the frame.
Location of Vehicle : Calgary
Asking Price : $5500 FIRM. May consider trades...
Note: Im not interested in hearing on how you can buy a "real bike" for the same money or less. This is obviously not the right bike for you. This bike is like nothing else to ride and turns heads like nothing else.
Selling my beloved Honda ruckus. Reason I'm selling is i will be using the money to invest in my photography business. I love this bike to bits, but as I'm getting more serious about my business the money is better suited there.
The bike was powder coated in january by calgary powdercoating. Paint for the plastics was matched by calgary auto body supples. Paint code and powder coat swatch will be included.
The only problem with the bike is that the rear battery box has some cracks in it, would need replacement (about a $50 part). And then the bike needs a billet fuel pump mount. Currently out of stock and I'm waiting for it to come back in stock. Once it does ill buy and install it. ($40 part).
Thats it. There are literally 0 problems with this bike. It runs perfectly and It was built with care and attention to detail as many of you have seen from my build on youtube.
Engine swap was completed mid summer and is running perfectly. It is a completely stock 150cc engine and has many rooms for upgrades if that interests you. The bike currently tops out at 88kph. There is a lot of room for speed increases with tuning.
Note: This swap was done with a Makoa Harness. This is the best swap harness available on the market. Hand made using Oem honda ruckus wiring, fusebox, etc. Other harnesses are cheap Chinese wiring with poor quality components.
You can watch the engine swap process here: Videos 1 though 4: https://youtu.be/L1At9U5HlIE
Modification list includes:
Wheels/Suspension:
-12x8 Rear Wheel
-Shinko Whitewall Rear Tire
-Shinko Whitewall front Tire
-Chrome Painted front wheel
-Mojo Customs gy6 engine mount
-Mojo Customs Shock Mount
-9 inch engine stretch
-RRGS Front shocks
-NCY 12mm Axle
-Low Down Rear Shock
-TRS Billet Drum Adapter
-Dan Max rear Hub
Engine/Transmission:
-NCY high ignition coil
-Gy6 150cc Long Case Engine
-11 pole stator
-Mikuni vacuum Fuel pump
-Yoshimura Carbon Exhaust
-TRS clocking flange
-CVK 24mm Carb with autochoke delete
-Uni Air filter.
-TRS throttle Cable Adapter
-Short Gy6 Axle
-NCY blue brake shoes
Cosmetic:
-Factory Plastic Delete
-Shaved Front signals
-Shaved rear signals/Plate frame
-Oem Speedometer Delete
-Custom Powdercoated/Painted
-Recaro Seat
-NCY Lowered Seat Frame
-NCY Gas Tank Cover
-NCY Chrome Handlebars
-Password JDM Foot Pegs
-Password JDM Handlebar Stem
-Password JDM Billet ignition Cover
-Dingleberry Cover
-Vapour Tachometer Stem Integration
-Vapor Tachometer/Speedometer
-White billet Grips
-Turtlehead LED twilight and signals
-LED Turn Signals
-LED Variable Flasher Relay
-Extended Fuel Line
-Extended Brake Line
-Bar End Mirror
-Low down Kick Stand
-Rear Hub Cap
I am probably missing a few things on this list.
Onto the photos:
https://farm5.staticflickr.com/4375/35721864283_60babd0a02_h.jpg
https://farm5.staticflickr.com/4336/36362928872_91ce9bd4ab_h.jpg
https://farm5.staticflickr.com/4339/35696427674_3605c036a2_h.jpg
https://farm5.staticflickr.com/4433/36363156612_d0a6b33163_h.jpg
]https://farm5.staticflickr.com/4391/37107044095_61f2eed9f3_h.jpg
Please contact me on here if interested.
Year : 2003
Exterior Color : Tiffany Blue
Odometer Reading : 500km on the 150cc, 4000km on the frame.
Location of Vehicle : Calgary
Asking Price : $5500 FIRM. May consider trades...
Note: Im not interested in hearing on how you can buy a "real bike" for the same money or less. This is obviously not the right bike for you. This bike is like nothing else to ride and turns heads like nothing else.
Selling my beloved Honda ruckus. Reason I'm selling is i will be using the money to invest in my photography business. I love this bike to bits, but as I'm getting more serious about my business the money is better suited there.
The bike was powder coated in january by calgary powdercoating. Paint for the plastics was matched by calgary auto body supples. Paint code and powder coat swatch will be included.
The only problem with the bike is that the rear battery box has some cracks in it, would need replacement (about a $50 part). And then the bike needs a billet fuel pump mount. Currently out of stock and I'm waiting for it to come back in stock. Once it does ill buy and install it. ($40 part).
Thats it. There are literally 0 problems with this bike. It runs perfectly and It was built with care and attention to detail as many of you have seen from my build on youtube.
Engine swap was completed mid summer and is running perfectly. It is a completely stock 150cc engine and has many rooms for upgrades if that interests you. The bike currently tops out at 88kph. There is a lot of room for speed increases with tuning.
Note: This swap was done with a Makoa Harness. This is the best swap harness available on the market. Hand made using Oem honda ruckus wiring, fusebox, etc. Other harnesses are cheap Chinese wiring with poor quality components.
You can watch the engine swap process here: Videos 1 though 4: https://youtu.be/L1At9U5HlIE
Modification list includes:
Wheels/Suspension:
-12x8 Rear Wheel
-Shinko Whitewall Rear Tire
-Shinko Whitewall front Tire
-Chrome Painted front wheel
-Mojo Customs gy6 engine mount
-Mojo Customs Shock Mount
-9 inch engine stretch
-RRGS Front shocks
-NCY 12mm Axle
-Low Down Rear Shock
-TRS Billet Drum Adapter
-Dan Max rear Hub
Engine/Transmission:
-NCY high ignition coil
-Gy6 150cc Long Case Engine
-11 pole stator
-Mikuni vacuum Fuel pump
-Yoshimura Carbon Exhaust
-TRS clocking flange
-CVK 24mm Carb with autochoke delete
-Uni Air filter.
-TRS throttle Cable Adapter
-Short Gy6 Axle
-NCY blue brake shoes
Cosmetic:
-Factory Plastic Delete
-Shaved Front signals
-Shaved rear signals/Plate frame
-Oem Speedometer Delete
-Custom Powdercoated/Painted
-Recaro Seat
-NCY Lowered Seat Frame
-NCY Gas Tank Cover
-NCY Chrome Handlebars
-Password JDM Foot Pegs
-Password JDM Handlebar Stem
-Password JDM Billet ignition Cover
-Dingleberry Cover
-Vapour Tachometer Stem Integration
-Vapor Tachometer/Speedometer
-White billet Grips
-Turtlehead LED twilight and signals
-LED Turn Signals
-LED Variable Flasher Relay
-Extended Fuel Line
-Extended Brake Line
-Bar End Mirror
-Low down Kick Stand
-Rear Hub Cap
I am probably missing a few things on this list.
Onto the photos:
https://farm5.staticflickr.com/4375/35721864283_60babd0a02_h.jpg
https://farm5.staticflickr.com/4336/36362928872_91ce9bd4ab_h.jpg
https://farm5.staticflickr.com/4339/35696427674_3605c036a2_h.jpg
https://farm5.staticflickr.com/4433/36363156612_d0a6b33163_h.jpg
]https://farm5.staticflickr.com/4391/37107044095_61f2eed9f3_h.jpg
Please contact me on here if interested.