View Full Version : Dashcam installer
sneek
12-12-2018, 03:46 PM
Anybody have a suggestion for a dash cam installer? I mirror tapped a few years ago, and I am aware that I could als fuse tap, but I am a but OCD. I would really love an install with wires cleanly tucked away.
revelations
12-12-2018, 03:51 PM
Get a voltage convertor (12v - 5v) and then splice, fuse (5A or less) and wire away.
All in one solution here - no tools required.
https://www.amazon.ca/SHISHUO-Dash-Cam-Hardwire-Kit/dp/B07FD3TTVN/ref=sr_1_1_sspa?ie=UTF8&qid=1544651464&sr=8-1-spons&keywords=12v+-+5v&psc=1
eglove
12-12-2018, 04:10 PM
Dave @ autotemp NE is awesome!
A2VR6
12-12-2018, 04:22 PM
Ian @ Visions South does a great job
buh_buh
12-12-2018, 06:31 PM
I just called autotemp yesterday, $200 for an install :rofl:
Let me know what you come up with sneek.
shakalaka
12-12-2018, 11:06 PM
Reading the dash cam thread I'd want this too. If I find a decently priced installation place I can order a 3 units of the 2 way cameras. If someone has suggestions for Edmonton, even better. Thanks.
Team_Mclaren
12-13-2018, 03:52 AM
try Autotech? Joe is OG
shadowz
12-13-2018, 09:01 AM
Joe @Autotech
shakalaka
12-13-2018, 09:40 AM
If someone calls up other places to get quotes for installation please post here. I will do the same if I happen to talk to someone.
gpomp
12-13-2018, 03:46 PM
Ian @ Visions South does a great job
Ian has installed all my dash cams. Just over $100
BensonTT
12-13-2018, 04:06 PM
Get a voltage convertor (12v - 5v) and then splice, fuse (5A or less) and wire away.
All in one solution here - no tools required.
https://www.amazon.ca/SHISHUO-Dash-Cam-Hardwire-Kit/dp/B07FD3TTVN/ref=sr_1_1_sspa?ie=UTF8&qid=1544651464&sr=8-1-spons&keywords=12v+-+5v&psc=1
Thats the kit I bought and installed myself. Super easy.. If I can do it then anyone can lol
buh_buh
12-13-2018, 06:35 PM
I don't doubt I can physically do it. But I hate taking apart interior panels and hiding wires.
I'll give Visions south a call.
msommers
12-14-2018, 10:31 AM
I just called autotemp yesterday, $200 for an install :rofl:
Let me know what you come up with sneek.
$200?! Front and rear? That seems outrageous just for install.
vengie
12-14-2018, 10:39 AM
Subscribed, I'm also looking for someone to install a 2 channel for me
max_boost
12-14-2018, 02:53 PM
Definitely Joe at AutoTech and I will bet it won't be anywhere near $200 lol
3nergiz3d
12-14-2018, 05:37 PM
Joe at AutoTech. His installs are clean and tucks everything nicely away.
buh_buh
12-14-2018, 05:38 PM
$200?! Front and rear? That seems outrageous just for install.
I didn't even ask for front and rear. I just asked about dash cam install and that's what he said.
ExtraSlow
12-14-2018, 06:55 PM
$200?! Front and rear? That seems outrageous just for install.
How long do you figure this takes? Bet his hourly rate is $150/hr and I would have guessed to do a clean install it was more than an hour.
Tej.S
12-14-2018, 10:11 PM
I installed my own dash cam (front and rear
), and helped a fellow beyonder figure out how to hardwire his as well. It took about an hour after jwslam helped me figure out where to connect all the wires lol. I tried calling places in the city, but nobody wanted to do it under $200.
npham
12-14-2018, 11:44 PM
Is Ian at Visions in Westhills/Signal Hill or on Macleod Trail?
vengie
12-17-2018, 11:08 AM
I have a camera waiting to install...
That said I would like to hardwire it.
Can anyone recommend an installer?
LilDrunkenSmurf
12-17-2018, 11:26 AM
Glenn @ Visions Crowfoot. Tell him Jory sent you.
shadowz
12-17-2018, 02:29 PM
Autotech charges 120-180 of course dependent on the car, not every car comes apart the same
A2VR6
12-22-2018, 08:09 PM
Is Ian at Visions in Westhills/Signal Hill or on Macleod Trail? Macleod Trail
ganesh
01-24-2019, 01:40 PM
For Install Visions 32Nd Ave quoted 230 + Tax.
Auto Tech 160 + Tax
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.