YETI Products

[bjstare]

YETI Mug to keep my coffee hot because I'm too cool for any other non-trendy insulated cup:

https://encrypted-tbn3.gstatic.com/shopping?q=tbn:ANd9GcTNXT6NPeoHY_gUq51FMp02Gez09stS-OdEb_Fh2PBVlBTugCORRAXv7BKpJCIYSOuJrlHvygqhUkeGL7sy-7SSjZ0-pnmSSQuEQbeW0WJnts4bxZ4KwtxuR8c&usqp=CAc

ftfy

[Mitsu3000gt]

ftfy

Fair. :rofl: At least I got it on sale.

[Brent.ff]

Fair. :rofl: At least I got it on sale.

Id also say, they are better then most of the 'equivalent'. My 20 oz is way better then my equivalent stanley, and no gross contraption to get grungy

[Mitsu3000gt]

Id also say, they are better then most of the 'equivalent'. My 20 oz is way better then my equivalent stanley, and no gross contraption to get grungy

Yeah I am not sure it's worth $30 at the end of the day, but the quality and coatings are excellent. Definitely a cut above the usual suspects like Thermos, etc. I use it every day so it's worth it to have a nice one IMO.

I have this one from Zojirushi for the car and it's expensive as well but extremely easy to clean and worth every penny:

https://www.amazon.ca/ZOJI-Zojirushi-SM-SHE60BZ-Stainless-Steel/dp/B074L2PBY9/ref=sr_1_3?keywords=zojirushi+coffee+thermos&qid=1569358160&s=gateway&sr=8-3

It works too well sometimes, I have to let the coffee cool down before I put it in the mug or after a 3 hour drive it's still way too hot to drink and I have had zero coffee :rofl: I can't really be upset about that though haha.

[88CRX]

Contigo mugs > *

Or are they not trendy enough for beyond :rofl:

[sabad66]

Yeti is the Apple of mugs.

[88CRX]

Yeti is the Apple of mugs.

$35 beer koozies and $1200 coolers. Holy fuck.

[killramos]

Poor people don’t understand quality products...

:rofl:

[bjstare]

Poor people don’t understand quality products...

:rofl:

This is my fave yeti product. Quality bucket right here: https://www.amazon.ca/YETI-Loadout-Resistant-Fishing-Charcoal/dp/B074QSF5B6/ref=sr_1_3_sspa?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3ukwyCIjsbkB7vtiRm2NEZB35dmnPdcEBsPaoPT3N3M96uPac_v1W0aAj1BEALw_wcB&hvadid=232487163282&hvdev=c&hvlocphy=1001801&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=6383917366162024406&hvtargid=aud-749198100220%3Akwd-299323232562&hydadcr=19696_10099133&keywords=yeti+bucket&qid=1569363347&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFUNTRGMDhNM1hZUzkmZW5jcnlwdGVkSWQ9QTAxNTMyNDEyN01OT0VFMzBGWEZaJmVuY3J5cHRlZEFkSWQ9QTA5ODA0OThEVVdRWTk4R1MzU0omd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

[killramos]

This is my fave yeti product. Quality bucket right here: https://www.amazon.ca/YETI-Loadout-Resistant-Fishing-Charcoal/dp/B074QSF5B6/ref=sr_1_3_sspa?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3ukwyCIjsbkB7vtiRm2NEZB35dmnPdcEBsPaoPT3N3M96uPac_v1W0aAj1BEALw_wcB&hvadid=232487163282&hvdev=c&hvlocphy=1001801&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=6383917366162024406&hvtargid=aud-749198100220%3Akwd-299323232562&hydadcr=19696_10099133&keywords=yeti+bucket&qid=1569363347&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFUNTRGMDhNM1hZUzkmZW5jcnlwdGVkSWQ9QTAxNTMyNDEyN01OT0VFMzBGWEZaJmVuY3J5cHRlZEFkSWQ9QTA5ODA0OThEVVdRWTk4R1MzU0omd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

Yeti?...

You mean those things my dog drinks out of?
87609

[msommers]

YETI Mug to keep my coffee hot when I drink it slow:

https://encrypted-tbn3.gstatic.com/shopping?q=tbn:ANd9GcTNXT6NPeoHY_gUq51FMp02Gez09stS-OdEb_Fh2PBVlBTugCORRAXv7BKpJCIYSOuJrlHvygqhUkeGL7sy-7SSjZ0-pnmSSQuEQbeW0WJnts4bxZ4KwtxuR8c&usqp=CAc

Curious over the long term what you think of this. I've had metal Thermos tumbler for years and it works well, albeit the paint doesn't hold up that well. In comparison, the Yeti equivalent doesn't sound like it does well at all and costs more...

[Brent.ff]

Curious over the long term what you think of this. I've had metal Thermos tumbler for years and it works well, albeit the paint doesn't hold up that well. In comparison, the Yeti equivalent doesn't sound like it does well at all and costs more...

I’ve had my yeti 20 oz for 3 years and it still looks brand new, used daily. No paint chips or anything

[sabad66]

Curious over the long term what you think of this. I've had metal Thermos tumbler for years and it works well, albeit the paint doesn't hold up that well. In comparison, the Yeti equivalent doesn't sound like it does well at all and costs more...

I’ve had mine for a few months and I love it. Wife kept stealing it so I bought another one for her too. They are really well made, keep your drink hot for long, and you don’t have to worry about chipping because the coloured part is solid plastic/resin. $45 for a mug sounds steep but when you consider how long they should last it’s worth it IMO

[ExtraSlow]

$45 for a coffee mug you use daily makes more sense than $600 for a cooler you use ten days a year.

[killramos]

Plus. Way more people get to see the logo on your coffee mug than the logo on your cooler :rofl:

[msommers]

I assume the lid hasn't been a problem? I might give it a whirl.

[jampack]

Seems like this has its own thread now lol.

I guess you can have a customized Yeti! It’s only in the US though.. I might ask my friend to take it here for me (have it shipped to his house in the US). Lol. I have to check it out first what this customization is all about.

https://www.yeti.com/en_US/custom-shop-drinkware.html

[Brent.ff]

I assume the lid hasn't been a problem? I might give it a whirl.

Same lid since I’ve had it. Solid. It’s also the premier beer drinking tumbler for walking the dog in the afternoons in the neighbourhood


I had one of their coolers, and while great, sold it for the equivalent Cabelas version. Got the 60Qt for the price of a 25 yeti..

[arcticcat522]

Had a 30oz tumbler for over a year. Paint wore off in one spot from when I wedged it in somewhere to hold it. Lid is still good, the magnetic piece happens and closes is genius. Nothing to ware out. I also bought the handle for it and it needs replacing. Kinda junk compared to everything else Yeti, but cheep considering Yeti.

Would recommend

[Mitsu3000gt]

Curious over the long term what you think of this. I've had metal Thermos tumbler for years and it works well, albeit the paint doesn't hold up that well. In comparison, the Yeti equivalent doesn't sound like it does well at all and costs more...

I just use mine around the house so that I don't have cold coffee when I am drinking slowly over a long period. For that it's awesome, keeps coffee hot or very warm for 3-4 hours just sitting out on the desk. The lid doesn't have any insulation I don't think, but it's sealed with a gasket and angled so nothing will spill if coffee splashes out of the spout. It doesn't sweat and is always room temperature to the touch. Coating seems very durable but it's not going to get abused with my usage - it's actually designed for camping.

The lid is not leak proof though, there is a spout to drink out of and a small ventilation hole. If you dropped it the lid probably wouldn't pop off though, it's on pretty tight and spills would be minimal.

The best one IMO is still the Zojirushi model that I posted, it works too well, to the point you need to cool your coffee down before you fill it or you won't be able to drink it for the next 8+ hours haha.

[RX_EVOLV]

Got one for my coffee and it's okay. Definitly very durable and high quality, but like others said the lid doesn't provide much insulation and the coffee does splash out of the spout. With that lid I find that my coffee gets 'warm' (from hot) within an hour or so.

[A790]

4 x YETI mugs. Not sure how you guys are getting "warm" coffee after an hour or so. Can make a coffee at 8 am and it is still hot by 12...

[Mitsu3000gt]

4 x YETI mugs. Not sure how you guys are getting "warm" coffee after an hour or so. Can make a coffee at 8 am and it is still hot by 12...

I think some people are talking about the actual traditional mugs and some are talking about the travel type mugs (Rambler/tumbler style) which are better sealed/insulated.

The regular mug kept coffee hot enough for about 3 hours in my cold basement with the lid, after that it stays warm for a while but is definitely cooling off.

They make a beer cozy that I am interested in haha.

[killramos]

I have a couple beer cosy’s.

My only comment is if your van is off dimension ( looking at you banquet ) they don’t fit well.

[JRSC00LUDE]

4 x YETI mugs. Not sure how you guys are getting "warm" coffee after an hour or so. Can make a coffee at 8 am and it is still hot by 12...

Perhaps they have lids like this one of mine that has an "always open" lid:

87706

Even with that it works very well however much more than an hour and you're drinking lukewarm at best.

[andyg16]

Just won a Yeti cooler at our golf tournament, I instantly had people asking to buy it off me. I didn't realize how expensive they are luckily I was looking at buying a cooler anyways :thumbsup:

[killramos]

Sell yeti to coworker. Buy normal cooler.

Profit.

That said they are great products, just expensive.

[RX_EVOLV]

Perhaps they have lids like this one of mine that has an "always open" lid:

87706

Even with that it works very well however much more than an hour and you're drinking lukewarm at best.

yep similar to that, but the lid sort of closes ( not leak proof). . an hour or so at best.

[JRSC00LUDE]

yep similar to that, but the lid sort of closes ( not leak proof). . an hour or so at best.

It's perfect for filling at home and finishing at the office though, I have found that even with the "open" top I use it much more than my Contigo mugs now.

[RX_EVOLV]

Yeah it's a great mug to hold for around the home and office, and it fits a full cup of the bigger size Nespresso Vertuoline, so I use it quite a bit for that, but not for the road.

[cyra1ax]

This is my fave yeti product. Quality bucket right here: https://www.amazon.ca/YETI-Loadout-Resistant-Fishing-Charcoal/dp/B074QSF5B6/ref=sr_1_3_sspa?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3ukwyCIjsbkB7vtiRm2NEZB35dmnPdcEBsPaoPT3N3M96uPac_v1W0aAj1BEALw_wcB&hvadid=232487163282&hvdev=c&hvlocphy=1001801&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=6383917366162024406&hvtargid=aud-749198100220%3Akwd-299323232562&hydadcr=19696_10099133&keywords=yeti+bucket&qid=1569363347&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFUNTRGMDhNM1hZUzkmZW5jcnlwdGVkSWQ9QTAxNTMyNDEyN01OT0VFMzBGWEZaJmVuY3J5cHRlZEFkSWQ9QTA5ODA0OThEVVdRWTk4R1MzU0omd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

The comments on this rival the ones for the Sugar-free Haribo bears IMO.:rofl:

[A790]

Perhaps they have lids like this one of mine that has an "always open" lid:

87706

Even with that it works very well however much more than an hour and you're drinking lukewarm at best.

You're missing the magnet-sealer-dealer-thingy.

I have two of those mugs and get 2-3 hours of "hot" coffee before it transitions to lukewarm. I'm not sure why my experience is so different than yours.

[Swank]

The comments on this rival the ones for the Sugar-free Haribo bears IMO.:rofl:

Great read indeed, haha, thanks!

[Brent.ff]

You're missing the magnet-sealer-dealer-thingy.

I have two of those mugs and get 2-3 hours of "hot" coffee before it transitions to lukewarm. I'm not sure why my experience is so different than yours.

It's also the very first rendition of the mugs. The new ones seem to be better

[JRSC00LUDE]

You're missing the magnet-sealer-dealer-thingy.

I have two of those mugs and get 2-3 hours of "hot" coffee before it transitions to lukewarm. I'm not sure why my experience is so different than yours.

This one was from a supplier, it came that way! And probably just because I tend to drink the first half to 2/3rd's quite quickly so at that point there's just less volume. I may have an incorrect description of "lukewarm" also, as I like my coffee quite hot so I just call it cold when it probably isn't.....

[Brent.ff]

This one was from a supplier, it came that way! And probably just because I tend to drink the first half to 2/3rd's quite quickly so at that point there's just less volume. I may have an incorrect description of "lukewarm" also, as I like my coffee quite hot so I just call it cold when it probably isn't.....

Its cause its the old version of the mug. the new ones are stamped with a YETI logo, not laser etched

[A790]

This one was from a supplier, it came that way! And probably just because I tend to drink the first half to 2/3rd's quite quickly so at that point there's just less volume. I may have an incorrect description of "lukewarm" also, as I like my coffee quite hot so I just call it cold when it probably isn't.....

Hey fair enough. I'm going to do a test: brew a cup of coffee and then leave it in the mug all day with a temp probe inside it. Would make for an interesting test.

[JRSC00LUDE]

Hey fair enough. I'm going to do a test: brew a cup of coffee and then leave it in the mug all day with a temp probe inside it. Would make for an interesting test.

These are the kind of things I enjoy. Especially if it time stamped the temperature changes haha

[D'z Nutz]

Hey fair enough. I'm going to do a test: brew a cup of coffee and then leave it in the mug all day with a temp probe inside it. Would make for an interesting test.

I have no stake in this cause I don't own anything from YETI, nor do I want any, but I'm looking forward to this purely for the data analysis haha

Gonna launch mugsyoucanprobe.com, Cam? haha

[C4S]

Yeah I am not sure it's worth $30 at the end of the day, but the quality and coatings are excellent. Definitely a cut above the usual suspects like Thermos, etc. I use it every day so it's worth it to have a nice one IMO.

I have this one from Zojirushi for the car and it's expensive as well but extremely easy to clean and worth every penny:

https://www.amazon.ca/ZOJI-Zojirushi-SM-SHE60BZ-Stainless-Steel/dp/B074L2PBY9/ref=sr_1_3?keywords=zojirushi+coffee+thermos&qid=1569358160&s=gateway&sr=8-3

It works too well sometimes, I have to let the coffee cool down before I put it in the mug or after a 3 hour drive it's still way too hot to drink and I have had zero coffee :rofl: I can't really be upset about that though haha.

Those Zoji and Tiger thermos are much nicer!!

[cycosis]

I had a contract for FGL sports (atmospehre and sportchek) this past year. One of the brands I managed online was Yeti. Just insane in terms of sales volume for the tumblers and coolers

[A790]

I have no stake in this cause I don't own anything from YETI, nor do I want any, but I'm looking forward to this purely for the data analysis haha

Gonna launch mugsyoucanprobe.com, Cam? haha

Don't even tempt me.

"MugsYouCanAfford.com"

[ExtraSlow]

If you provide the mugs I can provide the instrumented testing and commentary.

[A790]

If you provide the mugs I can provide the instrumented testing and commentary.

I have the mugs. Sounds like you're swinging by here for a coffee.

[ExtraSlow]

I haven't even met your gal and now you want me to swing with you? Okay.

[A790]

I haven't even met your gal and now you want me to swing with you? Okay.

Come for coffee Sunday @ 9. Bring temperature probe. I'll stick it in places and see how long it takes to cool off.

[TurboMedic]

I have a couple beer cosy’s.

My only comment is if your van is off dimension ( looking at you banquet ) they don’t fit well.

I 3d printed extension tops for 16oz cans too for my cosy's. I could easily do the same for odd dimension cans

[jwslam]

https://www.youtube.com/watch?v=motXMqbCFQE

[killramos]

https://www.youtube.com/watch?v=motXMqbCFQE

Haha that’s was amazing

[ExtraSlow]

Yeti alternative. Saw it pop up on my linkedin feed because I apparently know a dude who works there, or run it, or something. Whatever, I still won't buy it, but, well, here ya go:
https://kailanisports.com/hard-coolers/