turbo members

[fachie]

Hay this is for all those with turbos or like me soon to be.Im just couriouse on what everyone has.some of you I already know but not every one.

-car?
-what turbo?size/make ect?
-manifold?
-bov?
-IC?
-fuel management
-psi?
-size injectors?
-other mods done for turbo?
-HP?
-where did you get it installed?
Well, im pretty sure that you get the idea,please just be specific. Thanks a lot.

[finboy]

car: 1989 dodge spirit ES turbo
motor: iron block, aluminum head, 2.5L four cylender
turbo: garrett hybrid, .63 exhaust housing with stock thunderbird wheel, .60 intake with grand national wheel
manifold: ported stock log manifold
BOV: custom 1g dsm, machined top, good for over 30 psi
intercooler: aftermarket tractor intercooler, 36X12X6
fuel managment: fmu for now, looking into megasquirt
psi: 20+
injectors: mopar performance 52lph (around 500cc)
hp: unknown, car isn't running yet
installed: by me
when it will run: some day when i'm not broke

[EK 2.0]

-car?...1990 Eagle talon AWD TSi
-what turbo?...Mitsubishi 20G (ported)
-manifold?...Stock Mistu for now...
-bov?...BLITZ DD (vented to atmosphere)
-IC?...Cummins Turbo Diesel on the way
-fuel management...APEXi S-AFC II, Datalogger on the Palm
-psi?...between 15-20 depending on how I feel that day
-size injectors?...510cc right now hopefully 660 by the end of summer
-other mods done for turbo?...3 inch turbo back exhaust exiting out in front of the drivers rear wheel, Intercooler piping upgrades, normal array of gauges, 3000GT VR-4 Fuel Pump, requisite K&N filter...synthetic oil...
-HP?...safe guess 325 at the flywheel??...:dunno:
-where did you get it installed?..Dan Jones, the Killer K Car guy at race city rebuilt my motor, the rest I did a lot of, and people from the DSM Club here in town helped me out with as well...


I am sure there is more stuff, I will edit and add as I remember...

[rage2]

-car : Porsche 944 Turbo
-what turbo?size/make ect : Garett T04E Super 60 Trim .70 A/R, KKK #8 hot housing stage 3 wheel
-manifold : Stock
-bov : BMS w/custom spring
-IC : Stock
-fuel management : SDS EFI
-psi 12psi pump gas, 28psi 103 octane
-size injectors : 1000cc
-other mods done for turbo : O-ring'd block, raceware head studs
-HP : 380hp pump/540hp race flywheel
-where did you get it installed : Alpine Autowerks

Expecting a bit more hp on pump gas this year thanks to a custom 2.8L block with tons of forged internal parts :).

[djfob]

-car: 94 Civic Coupe (D16z6)
-what turbo- Mitsu Td04L (wrx turbo)
-manifold- custom equal length mani
-bov- 1g dsm bov
-IC- powerstroke core (30x6x2)
-fuel management- going to run uberdata
-psi- 8-10
-size injectors-450cc
-where did you get it installed- me hopefully
-HP- don't know yet gotta install first
:thumbsup:

[VWhooligan]

-car? 2000 VW Golf 1.8t
-what turbo?size/make ect? Borg/Warner KKK KO3
-manifold? Stock
-bov? Forge 007 Diverter Valve
-IC? Stock sidemount
-fuel management GIAC v4 ECU
-psi? 15
-size injectors? Stock
-other mods done for turbo? exhaust/intake
-HP? ~215
-where did you get it installed? stock

[2.0turbo]

Arif, with that setup, you better be making more than 325hp at the flywheel. Maybe at the wheels.

Car: 93 talon tsi fwd
Turbo: Mistubishi EVO 3 big 16g
Manifold: 2g dsm
BOV: stock, crushed and vented
IC: Supra 2jz twin turbo side mounted in stock location with some cutting and sawing and spreading.
Fuel Management: Ramchargers Hot wire maf (blow through)
PSI: right now, 10-13 until I fiqure out why I can't boost any higher, but 18 or 19 by next week.
Injectors: 550's
Supporting mods: Forged je pistons 9to1's, forged eagle rods, forged arp headbolts, stainless 4 layer head gasket, rps 2500lb turbo clutch, 255 lph pump walbro and ohhhh Royal Purple oil.
HP: A rough guess since it's not quite tuned yet, 315fwhp`
Installed at: Speedville

[gpomp]

-car? Civic DX
-what turbo?size/make ect? IHI RHB5
-manifold? legendboy
-bov? Tial
-IC? MX6
-fuel management? Hondata
-psi? 8
-size injectors? 550
-other mods done for turbo? 2.5" exhaust, walbro pump
-HP? 114 whp last dyno :thumbsdow
-where did you get it installed? legendboy

[RX-7_TWINTURBO]

Car- 88 Mazda RX-7 10th AE TII
turbo- Hitachi HT-18
manifold- stock
bov- Hks ssqv
IC- stock Tmic
fuel management- stock..looking into standalone Haltech
psi- stock 6-9 psi
size injectors- 550cc
other mods done for turbo- agressive streetport,short ram intake, Racing Beat exaust, fuel cut defencer, A/C removed, Emissions removed
HP- no clue

[dsm69]

-car 92 talon awd
-turbo 56trimgt compresor, t350 turbine,PTE turbine housing
-manifold ported 2gen
-bov stock
-i/c 12x24x3.5
-fuel 255pump,720cc injectors,aem rail&afpr
-fuel management afc,maft,'3.5maf
-psi yet to run the new turbo but ran 23psi on c-16 with the old 20g setup:burnout:

[Chris Ng]

Originally posted by RX-7_TWINTURBO
Car- 88 Mazda RX-7 10th AE TII
turbo- Hitachi HT-18
manifold- stock
bov- Hks ssqv
IC- stock Tmic
fuel management- stock..looking into standalone Haltech
psi- stock 6-9 psi
size injectors- 550cc
other mods done for turbo- agressive streetport,short ram intake, Racing Beat exaust, fuel cut defencer, A/C removed, Emissions removed
HP-Dyno'ed at 250RWHP on Mustang Dyno

Do you have a dyno chart to back that up? the stock turbo at stock boost is not going to get you anywhere near 250rwhp, especially not on a mustang dyno, and not at our altitude.. even at 10 psi on the stock turbo, you're not going to be over 200rwhp and the stock injectors are not going to support that kind of power...

[RX-7_TWINTURBO]

Originally posted by Chris Ng


Do you have a dyno chart to back that up? the stock turbo at stock boost is not going to get you anywhere near 250rwhp, especially not on a mustang dyno, and not at our altitude.. even at 10 psi on the stock turbo, you're not going to be over 200rwhp and the stock injectors are not going to support that kind of power...
no dyno sheet... previous owner had it dyno'ed so it is probably flywheel hp or complete Bullshit..at any rate i'll get some dyno time soon

[illeagle]

-car? - 1988 Mazda 323 GT
-what turbo?size/make ect? - VJ-14 small
-manifold? - factory
-bov? - Apex'i dual chamber
-IC? - MX-6 GT front mount
-fuel management - Factory
-psi? - 8 for now, 16 when tuned
-size injectors? factory, i'm not sure what they are
-other mods done for turbo? - custom hard piping
-HP? 140 to wheels i think...
-where did you get it installed? - Factory

[GT-FOUR]

-car 1988 Toyota Celica 4WD Turbo

-what turbo 1994-99 Celica GT-Four CT20b (toyota)

-manifold stock

-bov Bailey Motorsports DV30 (recirculating)

-IC 1993 Celica GT-Four RC water to air

-fuel management SX FPR, stock '91 jdm ecu

-psi 9psi ...for now

-size injectors 440cc/min

-other mods done for turbo water injection, NGK 6097 plugs, TTE mhg, ARP head studs, intake, exhaust, fidanza flywheel, clutchmasters stage 3 clutch, pcv catch can, walbro 255lph pump, yadda yadda...

-HP 236awhp, 252 aw ft-lbs

-where did you get it installed I do my own work

[fachie]

wow very interesting,but I know we have way more boosters then that on beyond.What is everyone going sleeper now?:thumbsup: :thumbsup:

[fachie]

I should be able to post myn in a few weaks.

[R-Audi]

Car: Audi A4 1.8T APR Stage 3
-what turbo? Garrett GT25rs
-manifold: Inconel
-bov GFB Hybrid
-IC Stock Sidemount
-fuel management APR ECU (stage 3)
-psi-not sure
-size injectors-APR high Flow -not Sure numbers!
-other mods done for turbo 3" downpipe, 2.5" exhaust, relocatted cat
-HP 280hp 91 octane

[JustinL]

-car : 1988 Porsche 944 Turbo S
-what turbo?size/make ect : Stock KKK K26/8
-manifold : Stock
-bov : Stock
-IC : Stock
-fuel management : Link AFM
-psi: 16 falling to below 13 by redline
-size injectors : stock 37 lbhr
-other mods done for turbo : testpipe
-HP : 260rwhp 300ft# rwtq
-where did you get it installed : Home

[DSMer4Life]

car - 93 Talon TSi All Wheel Drive
turbo - stock Mitsu 14B (Mitsu small 16G this summer)
manifold - stock 1st generation 90-94 (ported 2nd gen this summer)
bov - stock
IC - stock (Supra side-mount this summer)
fuel management - stock (S-AFC this summer)
psi - 12-13psi street, 17-18psi track
injectors - stock 440cc (Mopar Performance 52lbs/min this summer)
other mods - datalogger, K&N filter, free mods (cut aircan, removed silencer, removed lower honeycomb from MAS, backed out screw), 2.5" pressbent turbo-back exhaust, rewired fuel pump with larger awg wiring, advanced timing 5 degrees, ball & spring boost valve, 2.25" upper ic pipe, KYB AGX struts, H&R springs, front & rear strut bars, (ported 16G turbine & O2 housings, 2nd gen MAS, and higher psi fpr this summer) and other little odds and ends
HP - unknown, 14.2@93mph last year on stock turbo:devil:
where did you get it installed - me motorsports:clap:

[Redlyne_mr2]

car - 1991 Toyota MR2 turbo
turbo - CT26 46 trim clipped 14 degrees
manifold - stock
bov - HKS SSQ
IC - stock with IC sprayer and larger charge pipes
fuel management - safc but getting e-manage
psi - 6-18 psi depending on situation
injectors - stock 440cc
other mods done for turbo - 3inch DP, 3 inch exhaust, apexi intake, avcr changing to e-01, GM knock sensor. APS racing TB inlet
hp: unknown havent dynoed yet, 1/4mile:unknown car still being built
where do you get it installed? Home

[legendboy]

Originally posted by sivikish
I should be able to post myn in a few weaks.

so what did you end up going with??

[heavyD]

I'm too lazy to type everything out. Go to dsmtuners.com search for heavyD. You can check out my mods and some old pics. Updated pics coming soon.

[black_shadow_18]

-car: 1993 Eagle Talon TSi AWD

-what turbo?size/make ect: Mitsu Evo3 Big 16G

-manifold: EVO 3

-bov: Stock 1G DSM

-IC: Stock 1G sidemount, FMIC on its way

-fuel management: 3" GM maf, and MAF translator

-psi: 11 for break in, planning on low to mid 20's

-size injectors: FIC 660's

-other mods done for turbo: Weisco 8.3:1 pistons, Eagle H-beam rods, Balanced crank, removed balance shafts, Cometic head gasket, Walbro 255HP pump, Datalogger.

-HP: Enough!

-where did you get it installed: All by ME, and Royal Bank!

[fachie]

Originally posted by legendboy


so what did you end up going with??
well not to shure on all the fine details yet but I did buy one of your old manifolds.

[legendboy]

a log style then?

[Idratherbsidewayz]

-car: 1990 Nissan 240sx
-turbo: T-25
-manifold: Stock
-bov: Stock Bypass Valve
-IC: Nissan Silvia sidemount
-fuel management: E-manage in the next 2 weeks
-psi: 10
-size injectors: 370cc/min
-other mods done for turbo: Trust 3 inch downpipe
-HP: No clue, dyno sheets after fuel managed
-where did you get it installed: Engine installed at Autodream

[boostedDsm]

car 1998 mitsu eclipse gsx
what turbo SCM61 T04 turbine, PTE turbine housing
manifold Equal length stainless
-bov Apexi twin chamber
-IC? Greddy 24 row
-fuel management Apexi power FC standalone
-psi? 25+
-size injectors? 780cc, 255 pump
-other mods done Evo 3 motor,ported head, alum fly
6 puck clutch, direct port nitrous............
-Hp? hoping for 500+ (if it ever runs)
:banghead:
-where did you get it installed? Speedville

[fachie]

wow so many pimps on beyond

[fachie]

Originally posted by boostedDsm
car 1998 mitsu eclipse gsx
what turbo SCM61 T04 turbine, PTE turbine housing
manifold Equal length stainless
-bov Apexi twin chamber
-IC? Greddy 24 row
-fuel management Apexi power FC standalone
-psi? 25+
-size injectors? 780cc, 255 pump
-other mods done Evo 3 motor,ported head, alum fly
6 puck clutch, direct port nitrous............
-Hp? hoping for 500+ (if it ever runs)
:banghead:
-where did you get it installed? Speedville
how do you like the bov?how much $$

[boostedDsm]

Still waiting to fire up my ride but i've heard one before, pretty standard chirp. nice and crisp:tongue: ( hard to explain, you've gotta hear it i guess)

[BigMass]

1990 FWD Talon.

Soon to be my winter car. Going to go for a Z32 or 3G RX-7 for summer.

[Maxt]

Car:1987 mazda Rx-7 TII
Turbo: currently T04e 60 trim p trim ex/1.15 ar,moving to TV-51
Manifold : custom divided stainless steel, made by me
bov : Tial 50mm
ic: spearco fmic with 2.5" stainless piping
engine management : haltech e6k
injectors : 2x 550 cc, 2x 1600 cc seondondaries
pump: walbro hp 255
Other mods: Partial bridgeport s5 j-spec engine with mazda 2mm seals, paralleled fuel rails, malpassi fpr, tial wastegate(open vented)
Hp not sure anymore, somewhere north of 400 rwhp at a measly 14 psi or so...

[MaEsTr0]

-car?1990 Talon Tsi AWD
-what turbo?stock 14B..big 16g awaiting a rebuild
-manifold?evo
-bov?stock
-IC?stock...looking for cummins or npr
-fuel management..stock..
-psi?15
-size injectors?450..510's waiting on bench
-other mods done for turbo?balance shafts removed..190lph walbro, exhaust, k&n
-HP?dunno
-where did you get it installed?by me

[dsm69]

[i] SCM61 T04 turbine, PTE turbine housing
[/B]

Wow thats a big ass turbo! ;) good luck!

[Lo)2enz0]

-car: 1990 Nissan 240sx (sileighty)
-engine: ca18det
-turbo: T-28
-manifold: Stock
-bov: Sard
-IC: Nissan Silvia sidemount
-fuel management: stock
-psi: 7
-size injectors: 370cc/min
-other mods done for turbo:custom downpiping
-HP: supposed to run 175hp with the stock t25, don't know about the t28
-where did you get it installed: Engine installed at Autodream

[heavyD]

Originally posted by Lo)2enz0
-car: 1990 Nissan 240sx (sileighty)
-engine: ca18det
-turbo: T-28
-manifold: Stock
-bov: Sard
-IC: Nissan Silvia sidemount
-fuel management: stock
-psi: 7
-size injectors: 370cc/min
-other mods done for turbo:custom downpiping
-HP: supposed to run 175hp with the stock t25, don't know about the t28
-where did you get it installed: Engine installed at Autodream

T28 with only 370cc injectors? Cutting it pretty close are we?

[WGR4Pussies]

-car : 89 Honda civic
-Engine: OBD0 DOHC ZC 1.6
-what turbo?size/make ect : Garret T3
-manifold : HF with adapter plate
-bov : 626
-IC : audi 5000
-fuel management : running Turbo-edit 2.0 and RTP board
-psi 10 psi
-size injectors : blue top dsm 450cc
-other mods done for turbo : synthetic oil, lol
-HP : 200Whp(projected)
-where did you get it installed : Home garage.

[theken]

[
-car : 84 jimmy
-Engine:96 4.3 vortec
-what turbo?size/make ect : garret t3/t04
-manifold :custom
-bov : hks ssqv
-IC : none
-fuel management :carb
-psi : 8-12
-size injectors :none
-other mods done for turbo : soon-hks wastegate
-HP :projected.....lots
-where did you get it installed : some guy that builds engine (not finished yet)

[Lo)2enz0]

Originally posted by heavyD


T28 with only 370cc injectors? Cutting it pretty close are we?

I was told the internals might be stock so thats what I am assuming. I still have to double check. the t28 was on my ca18det when I bought it and i didn't even know about it.

laurier

[89coupe]

89 Mustang
Turbonetics T67 Hybrid

Too much to list...click on link in sig to see the list.



Originally posted by sivikish
Hay this is for all those with turbos or like me soon to be.Im just couriouse on what everyone has.some of you I already know but not every one.

-car?
-what turbo?size/make ect?
-manifold?
-bov?
-IC?
-fuel management
-psi?
-size injectors?
-other mods done for turbo?
-HP?
-where did you get it installed?
Well, im pretty sure that you get the idea,please just be specific. Thanks a lot.

[limecorrado]

car? CRX Si
-what turbo?size/make ect? td03
-manifold? HF/Custom
-bov? Turbo xs
-IC? Front Mounted Supercoupe
-fuel management ? Undecided
-psi? Less Than 8 Psi
-size injectors? Undecided
-other mods done for turbo? Exhaust
-HP? ???????
-where did you get it installed? My Garage


The Project Is Coming Along However It's No Finished Yet i'll Let You Guys Know When It's Done.