EricEric
06-16-2004, 11:37 PM
i think these are old toda grinds, not 100% sure... used cams very aggressive cam profiles u need under buckets shims(valtrain kit $900cad from TED or 900usd from TODA)
304 intake 288exhaust the intake cam lift is a lil more then 10mm and the exhaust is 10mm, u also need valve spring around $200-300(TRD TODA TED), power at mid and high rpms alot of gain, proably alot of lost at low rpms too, idle needs to be raised to about 1000-1200, TVIS removed will give more power for cams above 288 cams, recomend ITB or sidedraft set up stock fueling is inadequate above 8000, the cams can flow up to 9-10k, rev limiter removed or stand alone ecu recommended... stock specs re ~240 7.56... pm me for details...
304 intake 288exhaust the intake cam lift is a lil more then 10mm and the exhaust is 10mm, u also need valve spring around $200-300(TRD TODA TED), power at mid and high rpms alot of gain, proably alot of lost at low rpms too, idle needs to be raised to about 1000-1200, TVIS removed will give more power for cams above 288 cams, recomend ITB or sidedraft set up stock fueling is inadequate above 8000, the cams can flow up to 9-10k, rev limiter removed or stand alone ecu recommended... stock specs re ~240 7.56... pm me for details...