View Full Version : keyless entry interior neon...
FinalAeon
10-24-2004, 12:55 PM
yesterday i installed keyless entry on my 96 accord. i got it working good but didnt have time to figure out how to get the signal to the headlights to get them to flash when i hit lock or unlock.
than i got to thinkin, since i have interior neon, how could i send a signal long enoug to the neon to get it to stay on for like 1 second during/after the car was unlocked? i know how to get the constant power to the neon from the unlock/lock signal, but i dont know how to keep the contant power open for a period of time...
Fordpower.ca
10-24-2004, 09:01 PM
you need a timed relay latch, it recieves the signal (from losk or unlock) and closes the relay for a predetermined amount of time.
what type of module are you using?
FinalAeon
10-27-2004, 04:01 PM
i'm using the rec-43t
could u explain more about this timed relay latch thing?
Ryan@DerdallDesigns
10-28-2004, 01:37 PM
hook the neon up to the dome light supervision wire from the alarm:thumbsup:
Fordpower.ca
10-28-2004, 06:08 PM
yes you could use the dome light supervision wire from the alarm.. but does your alarm have this?
FinalAeon
10-28-2004, 06:20 PM
nope, i dont think it does... actually i'm sure it doesnt :P
it has outputs 1, 2, 3, and 4...
1 - goes to lock
2 - goes to unlock
3 - nothing
4 - nothing
i was thinking if i set the 3rd output to the neon, and set the relay for like 2 seconds for output 3... that it would work... but it did not... apparently... :(
Fordpower.ca
10-28-2004, 06:37 PM
do you have a link to the manufacturer?
Ryan@DerdallDesigns
10-29-2004, 08:13 AM
DEI pulse timer that actuates through the lock/ unlock pulse:thumbsup:
Fordpower.ca
10-30-2004, 10:03 AM
Originally posted by Ray@DerdallDesigns
DEI pulse timer that actuates through the lock/ unlock pulse:thumbsup:
thats the one!
Ryan@DerdallDesigns
11-01-2004, 04:14 PM
So how did It work out?
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.