The Official 2nd Gen Integra Thread

[frozenrice]

Hey Jaylo, do you have any progress pictures of your turbo install? I'm always toying/thinking about ways to do it without losing the A/C or P/S. Looking at my car, I could go with a 1/2 rad, but the condensor for the A/C would still be a problem. Since it'll be a year round daily driver, I can't afford to lose the washer fluid tank either. I'm trying to figure out how to run the I/C piping around all this. Any ideas?

[gen2teggy]

yo guys i droped my car keys down the elevator crack!! when the door open i was holding sooo many things...it sliped...n it droped 6 floors down! omfg n it was thx giving.....they couldnt get it....it would have cost me 250 :(





if i wait a day...i could get it for free

[jaylo]

Originally posted by frozenrice
Hey Jaylo, do you have any progress pictures of your turbo install? I'm always toying/thinking about ways to do it without losing the A/C or P/S. Looking at my car, I could go with a 1/2 rad, but the condensor for the A/C would still be a problem. Since it'll be a year round daily driver, I can't afford to lose the washer fluid tank either. I'm trying to figure out how to run the I/C piping around all this. Any ideas?

Yup sure, I can send it all to you via e-mail, the charge pipe routing on the Hot side would be tricky. The only way that I can think of is to route the piping downwards, between the crossmember and the bottom of the radiator support.

Then you have to notch your stock bumper at the bottom. So it's pretty much going underneath the car.

Unless you want to do it like how I did mine, cut off some of the radiator support and go straight to the flimsy metal there. You will see on the pictures once I sent it to ya.

[freakin]

So I finally found some time to start putting my motor together this weekend. Corey loaned me some tools, so I went hard on Sunday. I would have finished up the shortblock but one of my pistons had to be cleaned up due to short love affair with a floating valve (check out the shiny bits in the pic). I ended up going with the USDM ITR pistons just to keep the compression ratio about 11:1. Anyhow, here are some teasers for anyone that might be interested.

http://members.shaw.ca/matteakin/acura/B18/ITRrodNpiston.jpg
http://members.shaw.ca/matteakin/acura/B18/pistonslovevalves.jpg
http://members.shaw.ca/matteakin/acura/B18/mmmmmmgreasy.jpg
http://members.shaw.ca/matteakin/acura/B18/bottomenddone.jpg
http://members.shaw.ca/matteakin/acura/B18/twopistonstogo.jpg

[danlowteg]

Originally posted by freakin
So I finally found some time to start putting my motor together this weekend. Corey loaned me some tools, so I went hard on Sunday.
http://members.shaw.ca/matteakin/acura/B18/mmmmmmgreasy.jpg


those are some nice arms matt :nut:

[freakin]

Originally posted by danlowteg


those are some nice arms matt :nut:

You mean some SEXY arms!! I was expecting a comment on the glove.


Anyhow, I cleaned up that piston last night with a die-grinder. It turned out pretty good.

http://members.shaw.ca/matteakin/acura/B18/piston3cleanedup.JPG

[QuasarCav]

P73 Power!!!!

Looking good so far, VTEC in the snow.

[frozenrice]

What I aspire for my car to look like in the future..........

http://www.beaterz.com/one_liners/0201/images/evil_teg.jpg

[QuasarCav]

I see at least 3 riced up 2nd gens in Edmonton every day.

I have seen another Isle green LS though, I'm going to snap a pic of both of us parked together.

So how were the plugs?

[frozenrice]

Originally posted by QuasarCav
I see at least 3 riced up 2nd gens in Edmonton every day.

I have seen another Isle green LS though, I'm going to snap a pic of both of us parked together.

So how were the plugs?

There's some nice G2s up there, but yeah, I'd have to say I've seen some pretty bad ones up there too. A few years ago, I saw one with what looked to be like 13" wire rims with whitewalls.

Haven't had a chance to do that yet. Wheel bearing and hub went on the wife's car this past weekend, so I wasn't really in the mood to do anything about it yet.

[bigbadboss101]

My left signal light is blinking very fast. Are there separate flashers for left and right? The other side works normally.
Does it flash erratically cuz of a flasher?

I missed the miss cuz I was helping galfriends move. Any plans of getting together? You boys play ball hockey or football? We played last Monday, it was a nice day for it.

[stevieo]

umm, i think its blinking fast cause..

a) you have a burnt out bulb on your left side
b) something to do with a relay? I'm not sure..it happened to my friend but it wasjust a burnt out bulb.

[QuasarCav]

Stevio is right, check the opposite bulb. The bulbs in the corners count too.

[bigbadboss101]

Ok, the corner bulb works, it's the one in the front that is burnt out.

[danlowteg]

Originally posted by frozenrice
What I aspire for my car to look like in the future..........

http://www.beaterz.com/one_liners/0201/images/evil_teg.jpg

that is pretty cool how he did that with the hood, takes talent to bad it looks like ass

[derek123]

^ money can't buy taste.


:werd:

[frozenrice]

Any of you guys want to meet up at the ABTegs meet this Sunday? Looks like they're having a final meet before winter.
They're a good bunch of guys.

ABTegs meet- Oct 16. (http://forums.beyond.ca/showthread.php?s=&threadid=105092)

[QuasarCav]

Negative on that one, I've got lots of stuff to do all weekend. I leave at 7:00pm for Edmontontoo.

Whats stopping us meeting in winter? I'm doubting that most of us wont drive all year round. We can have a icy handbrake drift meet.

[freakin]

I might make it down for Sunday if I remember. I always seem to miss stuff like that and remember an hour later.

Anyhow, I finished up my rotating assembly tonight. Now I just need to lap the valves and start slapping it together. PS, P73's are a pain. No torque spec for the rods, you have to go until you get 0.006" of stretch. Kinda hard to do with a block girdle in the way!

Here's some pics from tonight if anyone's interested:

http://members.shaw.ca/matteakin/acura/B18/bottomenddone2.jpg
http://members.shaw.ca/matteakin/acura/B18/pistonsallinstalled.jpg
http://members.shaw.ca/matteakin/acura/B18/rodstretch.jpg

[bigbadboss101]

Good stuff. Does anyone know a site that has the specs for various Honda engines? I am somewhat a newbie and would like to read up on the different engines' specs and swapability.

Thanks.

PS

Possibly looking for:

- 91 GS driver seat. Mine is slightly ripped open, and a bit squeaky.

- Front bumper bulb.

My wiper seem to overrotate. The driver side one would go past the edge of the windshield. Just need to unscrew and adjust?

[freakin]

Here's a good site for swapping engine internals:
http://www.c-speedracing.com/howto/compcalc/compcalc.php

What are you looking to do?


Also with the wipers, mine do that as well. I've heard it's because of worn parts in the linkage.

[bigbadboss101]

No, not gonna do anything at this point. I am curious as to what I can do in the future, or what car I might want to acquire.

Interesting thing is that I have had quite good services at different shops and aftermarket stores with my Prelude and now Teg. With my Bimmer I didn't like the various places I went to. People tells me this and that shop have great service but the 2-3 places I went to didn't return my calls, were slow to serve etc. Probably signs that I shouldn't be driving a BMW.

Teg users are rather friendly and helpful, at least the ones here anyways. I am sure there are crazy Teg drivers out there.

[freakin]

Hey, does anyone have time to make it to PYP this afternoon? I'll buy you a beer if you can pick up some injectors for me. I need to get my hands on them before the 1/2 off sale tomorrow....I don't think they'll last.

[QuasarCav]

Originally posted by bigbadboss101


Teg users are rather friendly and helpful, at least the ones here anyways. I am sure there are crazy Teg drivers out there.

I'm fucking loco man.

[freakin]

Originally posted by QuasarCav


I'm fucking loco man.

You're bi-polar, there's a difference. :nut:

I'm going to PYP tomorrow at 8AM to get my parts. Anyone want to join me?

Also, for anyone looking for 1-PC headlights:
http://www.g2ic.com/forums/showthread.php?t=132564
Lewis, they might be perfect for you with your current trips up to Edmonton.

[seer_claw]

Originally posted by frozenrice
Any of you guys want to meet up at the ABTegs meet this Sunday? Looks like they're having a final meet before winter.
They're a good bunch of guys.

ABTegs meet- Oct 16. (http://forums.beyond.ca/showthread.php?s=&threadid=105092)

We'll likely have more meet during the winter but a few of the members are putting their cars away for the winter. I just want to get some pics of all the tegs together for one last time. Until next spring anyways. :thumbsup:

[frozenrice]

hehe....
Matt, I've always wondered what my car would look like with your rims on it...............
(check out the asking price too :eek: )
http://www.canadatrader.com/result/detailinfo.aspx?ID=14613884&pgno=3&srt=1

[freakin]

That's creepy, but worth every penny. :poosie:

[freakin]

Just got back from a wrecker tour. There's a DA at Bucks with black leather seats. The fronts looked pretty bad, but the backs looked decent. Someone had tried to rip out the bottom section and bent it a little, but I'm sure it'll bend back. I was going to take them, but the 4-door seats are different. It also has a super ricey muffler if you want one of those.

I also picked up an EF armrest. It's blue and looks like it would work in a DA no problem. $50 if anyone wants to try it out.

The Legend and Merkur were already stripped of any good parts. :thumbsdow

[frozenrice]

Originally posted by bigbadboss101
Possibly looking for:

- 91 GS driver seat. Mine is slightly ripped open, and a bit squeaky.
- Front bumper bulb.

seat (http://forums.beyond.ca/showthread.php?s=&threadid=103196)
Is there a special bumper bulb you're looking for? If just a regular bulb, I think you can pretty much get them at any auto parts place.

Matt, what was left on the DA?

[bigbadboss101]

Yup, thanks. I picked up a bulb.

[freakin]

Originally posted by frozenrice


seat (http://forums.beyond.ca/showthread.php?s=&threadid=103196)
Is there a special bumper bulb you're looking for? If just a regular bulb, I think you can pretty much get them at any auto parts place.

Matt, what was left on the DA?

Most of the interior, minus part of the seatbelts (otherwise I would've taken them). Motor's gone, and the console is ripped apart.

[frozenrice]

Anyone going to ABTegs tonite? Good chance I'll be there. Hope some of you can make it out.

[frostyda9]

Originally posted by freakin


I also picked up an EF armrest. It's blue and looks like it would work in a DA no problem. $50 if anyone wants to try it out.

Palmy blue-ish, or lighter? Let's see a pic :D

[freakin]

Originally posted by frostyda9


Palmy blue-ish, or lighter? Let's see a pic :D

You be the judge. Looks like a match to me. Here's a comparison with my old center section. You'd have to trim it a little at the top of the opening, but it wouldn't take much to make it fit.

Dave, I'll email you some more pics.

Here's what I hosted:

http://www.members.shaw.ca/matteakin/forsale/console1.JPG
http://www.members.shaw.ca/matteakin/forsale/console2.JPG
http://www.members.shaw.ca/matteakin/forsale/console3.JPG

[gen2teggy]

okay im keeping the DA :clap:
imma drive the 86 in winter! muhaha

[frostyda9]

If only it had a cupholder I'd be all over it. With god as my witness, I will find a suitable DA cupholder that doesn't spill, even during ...shall we say... spirited driving.

[QuasarCav]

Originally posted by frostyda9
If only it had a cupholder I'd be all over it. With god as my witness, I will find a suitable DA cupholder that doesn't spill, even during ...shall we say... spirited driving.

I've been looking for a while, driving with a coffee and a cigarette with a standard is not very easy. I had one that clipped on the door in my old teg and it held up pretty good.

The taurus DIN cupholder looks like ass in my opinion.

Do you guys think I should go with 16's in the spring? I'm most likely going to get the Eibach 1.4/1.0 or the 1.8/1.4 and I was thinking that 16's might fit the wheel well a little better. I'm really liking the look of the Rota Grid because it's pretty close to a 16 inch SiR wheel.

[Moonracer]

Dave you need cupholder that comes with a car! :rofl:

[freakin]

I always thought it worked like this:
Passenger=cupholder

Dave,
I've heard rumors that some of the nicer Nissans have DIN sized cup holders that fit 100% better than the Taurus option. Look for cars like the Maxima and Sentra if you can. I'll try to keep an eye out as well.

Oh and good news for me. I'm droping off my motor this weekend or early next week to be put in my car!!! Looks like I might get a month or so out of it before it gets too shitty out.
:thumbsup: :bigpimp: :clap: :poosie: :) :D :burnout: :werd: :hitit: :drama:

[frostyda9]

Congrats Matt, looking forward to seeing it back on the road. Even if it's no 15 pound-boosted turbo brick ;)

As for the whole cupholer thing, I don't know if I'll ever find what I want. There was an article in Road & Track a few years back about the progression of the cupholder, and how most of them still suck ass. From that article I got the idea of a suspended arm mount. I don't know if you've seen the floating arm camera mount used in making mountain bike videos, but if you have, it's the exact same idea.

[derek123]

^ but will it fit a big gulp ?

:burnout:

[danlowteg]

my cup holder is my gf

ps: hood still for sale :thumbsup: damn i just want it gone

[rey_mysterio]

i have been trying to find another cup holder for my car and it seems that they are hard to find . . .mine is broken im wondring if i should super glue it:) do anyone know if the cup holders in the center console are only made on certain models??

[freakin]

I'm pretty sure the G2's never had a cupholder, unless the USDM center console has one. My CDM/JDM console doesn't have one.

Dan, I can't belive you still have that hood. I'd totally pick it up if I didn't have one already.

Jorge, are you still looking to get some garage space? looks like I might be needing one at for December. I hvaen't had a chance to take a look around for one yet.

Also, I just dropped my motor off today. I'm hoping to get it all finished up this week. We'll see how that goes.

[danlowteg]

Originally posted by freakin
I'm pretty sure the G2's never had a cupholder, unless the USDM center console has one. My CDM/JDM console doesn't have one.

Dan, I can't belive you still have that hood. I'd totally pick it up if I didn't have one already.

Jorge, are you still looking to get some garage space? looks like I might be needing one at for December. I hvaen't had a chance to take a look around for one yet.

Also, I just dropped my motor off today. I'm hoping to get it all finished up this week. We'll see how that goes.

you have a cf hood? i didnt know that

[frozenrice]

Good luck Matt. I'm as excited for you as you are probably. One year a long time to wait. Let us know when you're on the road. Maybe another meet just so that we can all see that your car does exist hehe.
On another note, saw Sandino's old Teg on Home Road today. Buyer has kept it the same. Still can't believe Sandino sold out on us.

[freakin]

Originally posted by danlowteg


you have a cf hood? i didnt know that

Yep, I've had one for a little over 2 years now. You've never really seen my car, so that's understandable, hehe. The car has it installed on the pic in my avatar.

Mike, Hell yes! I'm going to try and insure it for November, that way I can get a little bit of road time out of it. I'd love to show it off, hehe.

I took more more pics of the build...I'm sure they're getting old, but meh, I'm having fun documenting everything. After this, I'll just start posting links to the pics.

Just finishing up the bottom end, main seals, oil pump, etc.
http://members.shaw.ca/matteakin/acura/B18/almostdone2.JPG
http://members.shaw.ca/matteakin/acura/B18/almostdone.JPG

Ported VTEC head.....woot!
http://members.shaw.ca/matteakin/acura/B18/portedhead.JPG

Skunk2 springs and retainers
http://www.members.shaw.ca/matteakin/acura/B18/skunk2valvetrain.JPG

Everything all packed up and heading out to the shop
http://www.members.shaw.ca/matteakin/acura/B18/enroute.JPG

[Genjuro]

well i had a great night..

got pulled over tonight for a "over sized exhaust". the cop needed an excuse or something cause i had big rims i guess so they fined me 115 bucks for the exhaust. THEN the cop sees the fucking mudslide that my smartass girl left in my back seat. he made me pour it out and fined me another 115 dollars. wonderful? i think so! she can pay for that shit.
and next, a dumbass kid pulls up to me on my way home in his camarro. im like.. pull down your window! hes like huh, and i say.. look you have a V6 pushing probably over 300 hp.. hes like you have a v6? im like no dumbass, you do. i have v4 with 150 hp, think about it. and then i laugh so he drives off..
lol..

anyways, night.

:banghead: :banghead: :banghead:

[rey_mysterio]

shitty genjuro. . .i once got pulled over twice in one week one for loud exhaust and once for not having amber reflector on corner lights . . .i only ended up getting a ticket for not having amber relector. . .since then i have ripped off my tint and havent had a problem...

hey matt im still interested in garage space for december .. .are you taking the chance that it might not snow till then?? or maybe your driving something else til then. .. .i know your getting crazy work done on your car. . . . .:burnout:

[freakin]

I'm planning on driving the Teg. I use transit for commuting, so the car is only a fairweather driver anyhow. Last year I was driving it up until mid december...then my motor went. After all the work I've put in to it, I'll need that month just to satisfy me. After that, I'll be able to put it away for a little bit. I don't think I could handle another 6 months for not using it.

As far as the garage goes. I'm sure we can find something where we're paying $200/month tops...so less than $100 eash. I'd like to find somthing heated, but chances of that are slim to none. My main thing is that it's relatively south for easy access. I'll get a hold of you in the next couple of weeks and we can try to figure something out.

[silva27]

Hi, are you still accepting members? I would love to join in and share idea's etc... I'm currently in BC for school, but will be back in Mootown in a few years. Here is a pic a my car.:thumbsup:

Umm...how do you post a pic of your car on here?

[frozenrice]

Hi there.

For sure - we always welcome G2 owners who share the same enthusiasm for their Tegs as we do (especially GS-R owners).

To post a picture, you need to find a host to upload your pictures to. Once you do that you insert the link to the picture using the appropriate codes as noted in the F.A.Q. section. Tips: a popular site to host your pictures is www.photobucket.com

[silva27]

Ok thanks, here it is http://1sexypimptress.homestead.com/files/IMG_1060.JPG

[danlowteg]

Originally posted by silva27
Ok thanks, here it is http://1sexypimptress.homestead.com/files/IMG_1060.JPG

cf hood? if not wanna buy mine lol

[derek123]

http://1sexypimptress.homestead.com/files/IMG_1060.JPG

sexy. white. bitch.

[silva27]

hehe thanks, I'm planning to transform it into a platinum silver and totally redo the interior in the coming future.

[jaylo]

Originally posted by silva27
hehe thanks, I'm planning to transform it into a platinum silver and totally redo the interior in the coming future.


Don't rip off my paint color! J/J! It will be nice to see another silver teg :)

[freakin]

http://1sexypimptress.homestead.com/files/IMG_1060.JPG

that's crazy....you have a working antenna! :bigpimp:

[Genjuro]

Originally posted by freakin

that's crazy....you have a working antenna! :bigpimp:
LOL so its common?
i disabled and stuffed mine in cause it was making a grinding noise when i turn on my radio.

[gen2teggy]

so what r u guys gonna be on halllowen?

[QuasarCav]

I'm gonna be in Edmonton, dressed up alone in my suite watching re-runs of fresh prince.

[gen2teggy]

i gonna dress up as a ninja....and hide in tress and jump down and scare kids! hahah

[freakin]

I haven't decided yet, but I'm either going as a Zissou intern. If that doesn't work out, I'll pull out my old Donnie Darko costume or No. 6 from the prisoner. I lack imagination.

[danlowteg]

im going as the crazy pocket bike guy that runs over people

[bigbadboss101]

Hey I am thinking on putting stock springs on my 91. The previous owner put in Eibach springs with stock suspension. Ride is too low. Idea how much I would spend? Monroe or what kind of set up?

[QuasarCav]

You can have my stock springs for your eibachs depending on the drop.

[danlowteg]

same here you can have my stock springs for the ones on the car

[frozenrice]

Originally posted by bigbadboss101
Hey I am thinking on putting stock springs on my 91. The previous owner put in Eibach springs with stock suspension. Ride is too low. Idea how much I would spend? Monroe or what kind of set up?

KYB, Tokico (sp?), Kona are all good brands of aftermarket shocks. Price depends if you're gonna go with non-adjustable vs adjustable. Just to give you an idea, I paid just under $400 for KYB GR2s (non adjustable-pretty much a stock replacement) and $160 for HR Sport springs. Installed them myself.

I have a full set of stock springs if you have a hard time finding them. The fronts were only on the car for about a year and a half before I got lowering springs. I think the rears are original.

[Vick7]

anyone have a flywheel for sale

[bigbadboss101]

How long does it take labour wise? The Susp. that is.

[freakin]

Originally posted by Vick7
anyone have a flywheel for sale

Will at STRD has an ITR one for $100 I think.

[frozenrice]

bigbadboss, it took me about 6 hours, only because the first corner I tried was a bitch to get out. Once I figured out the trick on how to take it out it went pretty quick.

vick7 if you need a stock one I have one from a 92.

[danlowteg]

i can do it in under 1 hour. if you want bring the shocks to me and i can compress the springs for you being the automotive tech guy i am

[freakin]

So....I know I've said this before, but it looks like I'll have the car back for next weekend. :poosie:

The engine is basically done, just need to do the valve adjustment, bolt some random pieces on, then drop it in the car and tune it. I'm hoping to have the motor done on Tuesday night.

Here's a few teaser pics:
http://www.members.shaw.ca/matteakin/acura/B18/camprofile.jpg
http://www.members.shaw.ca/matteakin/acura/B18/almostdoneback.jpg
http://members.shaw.ca/matteakin/acura/B18/almost%20done.jpg


I just bought Dan's seats, so I have to put them in as well. If the car's ready to rock this weekend, who's in for a meet? I'll be able to confirm if everything is going according to schedule closer to Thursday. :thumbsup: :thumbsup:

[frozenrice]

Matt, it's looking good. I think I can make it out this coming weekend if you're ready. Let us know.

[Speed_Dreams]

Looking good matt , but you know your cars still gonna be slow and FWD :poosie:

kidding always loved your car glad to see you will be getting it back and be able to drive it a little before the snow

[Moonracer]

Go matty, it's your birfday! :D

[Genjuro]

hey guys,
whats your opinions on headlights like this:

headlights (http://cgi.ebay.com/ebaymotors/90-92-93-ACURA-INTEGRA-JDM-PROJECTOR-HEAD-LIGHTS-LAMPS_W0QQcmdZViewItemQQcategoryZ33710QQitemZ8010328651QQrdZ1)

i know its not really jdm and stock looking, but have you seen them on a DA?

[QuasarCav]

The page doesn't work.

You've got 3 choices:

Stock: Looks okay, 9007 bulbs give you decent light.

JDM: Can't beat the looks, bulbs can get pricey and the right set of 1pcs would be around 200. You can get them for cheaper if you want to invest the time.

Ebay double angel eye halo JDM super projectors: Search around G2ic for some pics of them. Personally I dont think they do the front end justice, they take away from the look of the whole area.

[Genjuro]

here how about this:
http://lightlens.com/integra.htm
the item# is: M091129
angeleye but no halos.

or

http://www.streetbeatcustoms.com/acin90prheon.html

[QuasarCav]

I think they both look horrible, the second one is less horrible but it still is a 375 dollar waste of a nice 92-93 front end.

You are asking for opinions though and what I hate you could love. If you are willing to dish out the cash for new headlights what is stopping you from the 1pcs? Do you just want better light output?

[Genjuro]

lol no no thats not the price... i see them on ebay for about 125-200ish.

well i dont care really.. either one piece or the projectors.. its just hard finding the one piece. (been looking for 6 months)

[QuasarCav]

STRD has a set for 180.00 listed on their website.

[Genjuro]

yeah i asked them a while back and they said they would sell the one piece for fucking 700....


edit: yeah just called them for the one piece... heh.. looks like i'll get them for 180ish. thanks for reminding me of strd.

now for bulbs..

[QuasarCav]

If they quoted me 700 for the lights over the phone I wouldn't even give them an answer.

Make a post: WTB: 1pc headlights for DA

See what happens, Matt seems to have a knack for finding them.

This is the 2nd gen Integra thread and we are talking about 2nd gens, have you seen the BS in the other "official" car threads?

[stevieo]

hahahaha 700 bucks hahahaha

GO phone JDMsource tomorrow, they are closed right now.

tell SHO-heb that you are looking for 1 piece headlights for your integra.

[Speed_Dreams]

Originally posted by stevieo
hahahaha 700 bucks hahahaha

GO phone JDMsource tomorrow, they are closed right now.

tell SHO-heb that you are looking for 1 piece headlights for your integra. :werd:

Not to bash STRD or anything but i find there prices to differ between who you talk to.

JDMsource is the Shit they have the good stuff

also try JDMwest they seem to have good prices on everything

[freakin]

Originally posted by QuasarCav
.

Make a post: WTB: 1pc headlights for DA

See what happens, Matt seems to have a knack for finding them.


Check on G2IC as well. And yes, for some reason I keep finding sets. Whenever I find a set, I try to post a link up here. But honestly if you can find a clean set for under $200 with bulbs and they're local, I'd buy them. And by clean I mean NO yellowing. If you're going to have to clean them, then $100 is a fair price. If you get them from a shop, then you'll likely be able to exchange a dead bulb out for a good one if you notice it right away.

I think the aftermarket lights look like ass on the integras. Stick with USDM or JDM. Steve's USDM's look pretty neat with the yellow fogs and amber corners.

Also, if you buy JDM lights, invest in a spare set of H4H bulbs. They can be a bitch to find if you're in a pinch for one. You see group buys for them every once in a while on G2IC. Expect $50-$70 for a decent set. I recomend Raybrig's if you can get them.

[Genjuro]

thanks freakin.
can you help me find this stuff too? i'll pay back anything that you find/buy.

[jaylo]

Anyone got a B20 or a B18A (92-93) or B18B (94-01) with a perfect compression laying around? I'm looking into building one.

Jay

[rey_mysterio]

im kicking myself for buying those projectors . . . the only reason i wanted to do it because i wanted hids. . .ill probably try to sell them along with my rims, and typer front lip. . .plus i also have mugen replicas 4 sale!! im trying to go for a new look for next spring.so hopefully i can sell some of this stuff over tha winter. . :) i hate when i do this . . .:banghead: i might be interested in some trades. .

[freakin]

Originally posted by Genjuro
thanks freakin.
can you help me find this stuff too? i'll pay back anything that you find/buy.

I'll be in BC next weekend, so let me know if you find a set out there on G2IC. I'll bring them back with me.


Originally posted by jaylo
Anyone got a B20 or a B18A (92-93) or B18B (94-01) with a perfect compression laying around? I'm looking into building one.

Jay

Want my B20? :rofl:


Originally posted by rey_mysterio
im kicking myself for buying those projectors . . . the only reason i wanted to do it because i wanted hids. . .ill probably try to sell them along with my rims, and typer front lip. . .plus i also have mugen replicas 4 sale!! im trying to go for a new look for next spring.so hopefully i can sell some of this stuff over tha winter. . :) i hate when i do this . . .:banghead: i might be interested in some trades. .

I might be interested in the type R lip. It's for a 92-93, right? Is it carbon fibre, or painted? What parts do you need? Might be able to work a trade for something. Want an OEM lip + cash?

[gen2teggy]

freakin, what do u do for a living?

[freakin]

Student at the moment....but I used to be in IT.

[Genjuro]

what company?

[danlowteg]

Originally posted by rey_mysterio
im kicking myself for buying those projectors . . . the only reason i wanted to do it because i wanted hids. . .ill probably try to sell them along with my rims, and typer front lip. . .plus i also have mugen replicas 4 sale!! im trying to go for a new look for next spring.so hopefully i can sell some of this stuff over tha winter. . :) i hate when i do this . . .:banghead: i might be interested in some trades. .

more info on the rims:love:

[rey_mysterio]

the rims are 17inch asa 5 star rims. . . silver in color tires are in good shape. . . matt the type r lip is painted black. . it is for a 92 93 bumper. . .i want to buy wings west rs sides . . .the last time i got a quote was from speedtech for 500 bucks !!! i will probably be looking for cf lip and some one piece headlights. .

[freakin]

Originally posted by Genjuro
what company?

Was that directed towards me, hehe? If so, it's Telvent.


Jorge, would you sell the lip? If so, let me know what you'd want for it.

[rey_mysterio]

pmed you