PDA

View Full Version : The Official 2nd Gen Integra Thread



Pages : 1 2 3 [4] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

frostyda9
01-12-2005, 07:06 PM
Originally posted by frozenrice


Is this normal after lowering, because it never did this until after I lowered it.

Being lower increases your chances of damaging the boots, for sure. A lot of it is just luck and road conditions though. It could also be that they were already torn, but they got contaminated by the shyte on the roads now that you're lower.

I'm afraid to look at mine after plowing the street for the last couple days :(

Speed_Dreams
01-12-2005, 11:12 PM
its all good dave just sign up for the group buy with the rest of us

gen2teggy
01-13-2005, 03:45 AM
me

Speed_Dreams
01-13-2005, 05:51 PM
Originally posted by gen2teggy
me

wha? holy kinda random

gen2teggy
01-14-2005, 06:43 AM
...

frostyda9
01-14-2005, 07:04 AM
Originally posted by Speed_Dreams
haha FrozenRice , Moonracer , Speed_Dreams who else needs axles


Originally posted by Gen2teggy
me

;) Can you see now Drew? haha

Speed_Dreams
01-14-2005, 07:38 AM
ahhhh gotcha see everyone needs them. its to bad they are so bloody expensive

Moonracer
01-14-2005, 10:08 AM
I don't need any. Jen's is still pretty minor so I'll wait awhile for those.

QuasarCav
01-14-2005, 12:22 PM
Originally posted by Moonracer


I'll have a stock muffler for ya early feb.


Sounds good, right about when I will need it.

So I took the teg in for some treats. Got an oil change, a coolant flush, wheel balancing/alignment. She's happy now!

I have a mystery: My teg puts out heat only while above 3K and while driving. On the highway (80KM/H+) The coolant gauge shows really low, under the C low. I changed the thermo and the coolant as well as flushed the system. Why does this car run so cold? Is it just a teg thing?

My 87 LS would be so hot that after 5mins I would have to shut the heater off, why not with this one? Is the rad too big? Should I ghetto rig some cardboard?

TIA

Moonracer
01-14-2005, 01:20 PM
Probly dur to the fact that it's -30ish and you are moving drawing lots of cold air in at 80k plus. Mine goes down a bit at speed too but it's still hot.

frostyda9
01-14-2005, 01:23 PM
aluminum block + synthetic oil + fresh antifreeze = never goes very far above the cold line in the wintertime. That's my experience anyway. I've never had a problem with not enough heat from the vents though.

QuasarCav
01-14-2005, 01:27 PM
Originally posted by frostyda9
aluminum block + synthetic oil + fresh antifreeze = never goes very far above the cold line in the wintertime. That's my experience anyway. I've never had a problem with not enough heat from the vents though.


That is what I'm thinking. I've got 0w-30 in the crank and fresh antifreeze.

Is there a way to check the piping? Maybe some leaves or crap is blocking my heater core.

b16Ateg
01-14-2005, 01:40 PM
ya i have to change my thermostat someting soon its not pushing out enough heat like it was before
hope it wont be to hard and how much does a thermostat cost anyone know

Moonracer
01-14-2005, 01:45 PM
It's warming up the next few days, don't worry about it....lol

freakin
01-14-2005, 01:54 PM
Originally posted by Moonracer


Originally posted by Moonracer
Hey guys it's time for a winter auto X. There's one coming up on sun. jan. 23. There should be snow still so it will be a good time and a good way to hone your winter driving skills.

Who's in?


Did everybody miss this post? lol Who is in?

I think I might be in for this one.......but with the new car if I have it by then. Still haven't resolved anything with the teg yet. I'm going to come out and school you guys with a rwd wagon lol.

PS, Sandino, why not just replace Jen's boots instead of waiting for the axle to go? It would be a lot cheaper.

QuasarCav
01-14-2005, 01:58 PM
Originally posted by b16Ateg
ya i have to change my thermostat someting soon its not pushing out enough heat like it was before
hope it wont be to hard and how much does a thermostat cost anyone know


Just did mine, the part was $20 and it took about 30min.

I've read horror stories about shitty thermo's so I bought a genuine acura part!

Moonracer
01-14-2005, 02:05 PM
Originally posted by freakin


I think I might be in for this one.......but with the new car if I have it by then. Still haven't resolved anything with the teg yet. I'm going to come out and school you guys with a rwd wagon lol.

PS, Sandino, why not just replace Jen's boots instead of waiting for the axle to go? It would be a lot cheaper.

It's not the boots, it's the cv joint. Very minor right now, I'm doing a few things on my car right now. Besides she can pay for this one....lol :dunno: Actually I drive it more than she does so....:nut: maybe I shouldn't mention that. lol

b16Ateg
01-14-2005, 02:10 PM
were did you buy it from if you dont mind me asking so i can go pick one up

freakin
01-14-2005, 02:11 PM
ahhh, I thought you meant the tear was pretty minor.....

QuasarCav
01-14-2005, 02:20 PM
Originally posted by b16Ateg
were did you buy it from if you dont mind me asking so i can go pick one up


Oddly enough one of my friends had some laying around from his G2 days. I gave him 20 for it.

How much does the stealership charge?

b16Ateg
01-14-2005, 03:24 PM
did u need a gasket for it or did use a the same one.. and they cost like 18 bucks

QuasarCav
01-14-2005, 03:28 PM
I got a new gasket with it too! I guess I saved myself a few bucks.

If you need some help just shoot me a PM.

b16Ateg
01-14-2005, 08:42 PM
well i changed it and put in new coolant but i dunno what temp of thermostat i got cos it doesn't really put out alot of heat really on defrost so i have foggy windows now when i drive and i have to wait forever for them to unfog

b16Ateg
01-15-2005, 03:59 PM
hey if any of you guys want to get a hockey game going today or tonight give me a shout.. me and dave are looking for some more ppl here to get a game going.. .. of course it would be at parkland cos i have a pass and it has a buildin to warm up in.. but give me a shout guys.. logan 4614337

shadowz
01-15-2005, 04:39 PM
One of the nicest Da's Ive seen

b16Ateg
01-15-2005, 06:26 PM
were was that pic taken at nick
is it a local car or no

autoBITCH
01-15-2005, 06:30 PM
most def. one of the nicest da's i've seen yet....
when you getting yours nick?!

Moonracer
01-15-2005, 06:43 PM
I don't think he's getting one unless he needs a new project. But that one is very nice indeed.

This one is still one of my fav's

Moonracer
01-15-2005, 06:49 PM
and this one

b16Ateg
01-15-2005, 06:56 PM
wow my old rims that got stolen

Moonracer
01-15-2005, 07:01 PM
blue or orange car?

b16Ateg
01-15-2005, 10:46 PM
these rims sandino on my car.. these are the ones that got stolen

01-18-2005, 01:28 AM
Originally posted by shadowz
One of the nicest Da's Ive seen

nicest da on the planet.

Moonracer
01-18-2005, 02:05 AM
Originally posted by SpoonEK9


nicest da on the planet.

Ok is this a local car? Are they on this board?

01-18-2005, 09:38 AM
no, it was a car posted on honda-tech ages ago. US Car.

jaylo
01-18-2005, 12:17 PM
hubba hubba

oneshot
01-18-2005, 04:14 PM
Does anyone here know if Acura ever came out with an armrest for the G2 Integra's? And if anyone has any pictures. I've seen the one that mounts to the seat but i'm referring to the centre console armrest.

lam-boy
01-18-2005, 04:36 PM
Originally posted by oneshot
Does anyone here know if Acura ever came out with an armrest for the G2 Integra's? And if anyone has any pictures. I've seen the one that mounts to the seat but i'm referring to the centre console armrest.

yeah they did make them. you can see them from time to time on ebay..for about 90usd.

gimme a sec let me see if i can find a pic.

Moonracer
01-18-2005, 04:37 PM
Originally posted by oneshot
Does anyone here know if Acura ever came out with an armrest for the G2 Integra's? And if anyone has any pictures. I've seen the one that mounts to the seat but i'm referring to the centre console armrest.

I do believe so but goodluck finding one. You can try G2IC.com but if one goes up for sale it goes fast.

QuasarCav
01-18-2005, 04:48 PM
They guy who sold me the spoiler has one I think.

Maximum speed is his name.

frozenrice
01-18-2005, 07:34 PM
Originally posted by jaylo
hubba hubba

I think that's phat power's teg on the left. He was out here last summer and came out for one of the meet/cruises.

frostyda9
01-18-2005, 07:54 PM
Originally posted by frozenrice


I think that's phat power's teg on the left. He was out here last summer and came out for one of the meet/cruises.

I noticed that too. The car on the right seems to be E-DA9's car from Vancouver. IIRC he's the one with the Legend wing on his G2...very subtle and clean.

Speed_Dreams
01-18-2005, 08:18 PM
Originally posted by frostyda9


I noticed that too. The car on the right seems to be E-DA9's car from Vancouver. IIRC he's the one with the Legend wing on his G2...very subtle and clean.

its a vigor wing

frostyda9
01-18-2005, 08:28 PM
Oh yeah, Vigor wing. My bad. We'll call it even for the time I gave you some taillights for a *supposed* project for free, and you turned around and sold them :poosie: :rofl:

Anyways, a couple more of my favorite G2's, there are way too many nice ones for me to ever be able to pick a favorite...

http://gallery.tchleung.com/albums/Washed-Grass/Cimg0239.jpg

http://www.b17a.net/images/driverM.jpg

b16Ateg
01-18-2005, 10:06 PM
i still dont like the c2's on integras.. well on 4drs i hated mine on my car

frostyda9
01-18-2005, 10:57 PM
This one is very nearly my favorite if I had to pick one...I'm sure most of G2ICers have seen the car. Obsessive attention to detail, and running in the 13's on 17" wheels and street tires with a built N/A B18C...I would have put it in my post above but I can't link to G2IC pics :(

lam-boy
01-18-2005, 11:17 PM
http://memimage.cardomain.net/member_images/9/web/249000-249999/249269_33_full.jpg
C/f Hatch! :eek: :love:

and I'm having a hard time finding that black g2 sedan with the rear red sidemarkers. black g2, rolling on 17 volks..ah I can't even remember what it looks liek now. n/a also I believe.

jaylo
01-19-2005, 01:32 AM
and I'm having a hard time finding that black g2 sedan with the rear red sidemarkers. black g2, rolling on 17 volks..ah I can't even remember what it looks liek now. n/a also I believe. [/B]

1 of the nicest 4door evarr

lam-boy
01-19-2005, 02:32 AM
yep, thats the one!
its soooo nice.

Speed_Dreams
01-20-2005, 07:48 AM
Originally posted by frostyda9
Oh yeah, Vigor wing. My bad. We'll call it even for the time I gave you some taillights for a *supposed* project for free, and you turned around and sold them :poosie: :rofl:


It was a project. and I offered you half! That white one could be yours dave. i think you just changed my mind about your spoiler and your car being sexy!!!

gen2teggy
01-20-2005, 08:23 AM
yo guys should i keep my g2?
i dunno y but i might be wanted to sell it
but inna way i want too keep it
shes like my frist love
i've done soo much too her
everything is rdy for spring
every car is ungly too me but g2's lol

i dunno im werid

frostyda9
01-20-2005, 08:41 AM
Originally posted by Speed_Dreams


It was a project. and I offered you half!

haha...I know man, and I told you not to worry about it.
As for the wing, all three of the cars I posted above have stock wings...I think they just make the car look more balanced.

Moonracer
01-20-2005, 09:49 AM
Originally posted by gen2teggy
yo guys should i keep my g2?
i dunno y but i might be wanted to sell it
but inna way i want too keep it
shes like my frist love
i've done soo much too her
everything is rdy for spring
every car is ungly too me but g2's lol

i dunno im werid

Why do you want to sell?

QuasarCav
01-20-2005, 12:15 PM
Any G2'ers ever mounted a spoiler?

I bought an OE spoiler a while back and I want to mount it. Any tips/advice?

I want it to look good because little things like uniformity mean alot to me. Would it be worth it to pay someone to mount it?

Also, how much did you guys pay for your one-pieces?

TIA

Lewis

Speed_Dreams
01-20-2005, 05:35 PM
one peices usually go for around $200 and need some cleaning up. But thats easy just use the teg tips on G2IC.com and it will be perfect

b16Ateg
01-20-2005, 05:59 PM
dont get one peices.. everyone has them... get the projectors

powerslave
01-20-2005, 06:29 PM
Originally posted by b16Ateg
dont get one peices.. everyone has them... get the projectors

Make sure you buy the ones with nipples on them, like a certain member on this board ;)

frozenrice
01-20-2005, 07:10 PM
Originally posted by QuasarCav
Any G2'ers ever mounted a spoiler?

I bought an OE spoiler a while back and I want to mount it. Any tips/advice?

I want it to look good because little things like uniformity mean alot to me. Would it be worth it to pay someone to mount it?

Also, how much did you guys pay for your one-pieces?

TIA

Lewis

If you have a hatchback, there are two little indentations on each side of the underside of the hatch. These are your approximate hole locations. Tape the top side of the hatch before your drill through, install wing and bolt on the underside. Just make double sure that your markings are in the correct spot before drilling though- you only have one chance at it.

gen2teggy
01-20-2005, 07:11 PM
i dunno

frostyda9
01-20-2005, 07:40 PM
Tell you what gen2teggy....we'll practice on your car, and then I can avoid making mistakes when I do mine :angel:

gen2teggy
01-20-2005, 07:53 PM
;)

i need help fixing my head gaskets
and i need to find a used gas pump thingy
money is really tight rite now...just got into my 3rd car accdent...but nothing is banged up just my front bummper :(

lam-boy
01-20-2005, 09:03 PM
Originally posted by b16Ateg
dont get one peices.. everyone has them... get the projectors

yeah screw one pieces, screw projectors too!
http://img.photobucket.com/albums/v291/orphenz/DSC02438.jpg
rock painted amber corners and front lenses :bigpimp:

b16Ateg
01-20-2005, 09:11 PM
hey lam.. think you can paint my signals one day.. i like the color that you painted your signals and corners if they are the same color.. jsut thought i would ask...

and okay here it is.. my buddy with a g2 hit someone a few days ago and he really needs the foglights.. i dunno if they go into 3 peices but i am pretty sure that they do and he needs them fast so any of you guys that have one peices and want to get rid of yours let me know.. for free hehe:bigpimp: or whatever.. let me know..

b16Ateg
01-20-2005, 09:15 PM
at least the nipples are cooler than the altezza's

powerslave
01-20-2005, 09:18 PM
Oh, yet anohter altezza low-blow, nicely done Logan haha just joking man.

lam-boy
01-20-2005, 09:19 PM
Originally posted by b16Ateg
hey lam.. think you can paint my signals one day.. i like the color that you painted your signals and corners if they are the same color.. jsut thought i would ask...

and okay here it is.. my buddy with a g2 hit someone a few days ago and he really needs the foglights.. i dunno if they go into 3 peices but i am pretty sure that they do and he needs them fast so any of you guys that have one peices and want to get rid of yours let me know.. for free hehe:bigpimp: or whatever.. let me know..

yeah sure man, maybe sometime in spring? when it gets warmer. haha, I wanna have a g2 meet/cruise sometime.

frozenrice
01-20-2005, 09:20 PM
Originally posted by Speed_Dreams
one peices usually go for around $200 and need some cleaning up. But thats easy just use the teg tips on G2IC.com and it will be perfect

Check JDMsource here in calgary. I picked mine up for about $140 (sold the old ones for $90 hehe), but they were in rough shape. I spent a whole Saturday afternoon sanding and buffing to get the discolourization out. It wasn't too hard to do, just labour intensive.

frostyda9
01-20-2005, 09:25 PM
Originally posted by b16Ateg
at least the nipples are cooler than the altezza's

:rofl: You KNEW that was coming....

b16Ateg
01-20-2005, 09:25 PM
ya i have some sitting in my room right now that i want to get painted and i'm to lazy and ihave to re do my valvecover again since all the paint came off when i sprayedsome shit on it..
this is what it looked like before me and drew painted it before we striped it down

b16Ateg
01-20-2005, 09:26 PM
after it was painted

b16Ateg
01-20-2005, 09:27 PM
then when i washed my engine with some heavy duty engine cleaner and washed my engine clean

frostyda9
01-20-2005, 09:50 PM
DOH!

edit: well...since you have to repaint it now anyway, you should dremel the end off the valvecover for ease of future cam gear tuning ;)

b16Ateg
01-22-2005, 01:26 PM
i wonder how hard it would be to change my rear lights to 99 all red integra lights.. anybody have any ideas?

Moonracer
01-22-2005, 07:51 PM
well I'm not sure about the autox sunday cause Im not sure if I can rent a helmet. I still haven't bought one. :banghead: I checked the parking lot out today and there isn't to much snow left there. So it will basically be gravel.

Moonracer
01-23-2005, 01:15 AM
Anyway here's a link to the specifics. Racing starts at 10am

Autox info (http://cscc.speedracer.ca/phpBB2/viewtopic.php?t=1854)

freakin
01-23-2005, 10:39 AM
Sandino, I was hoping to pick my car up yesterday and make it to the autox today. Seeing as how it starts in 15 min, and I don't have any wheels, I'm not going to make it down. I was hoping to go watch at the very least. :banghead:


Originally posted by frostyda9
DOH!

edit: well...since you have to repaint it now anyway, you should dremel the end off the valvecover for ease of future cam gear tuning ;)

Very good idea....I'm kicking myself for not doing that before I powdercoated mine.

Logan, you should take it down to bare metal and get it powdercoated. If they don't have to clean it off, you could likely get it done for around $50. I love how mine turned out. :D

http://www.members.shaw.ca/matteakin/acura/B20/installed1.JPG

Moonracer
01-23-2005, 11:20 AM
I freakin slept in myself damit. But dave and I are going to go down and check it out at least. I can find out more info since buddy didn't email me back and maybe I can make the next one if there's snow.

b16Ateg
01-23-2005, 11:32 AM
ya matt you have alot more shit under your hood then i have under mine for some reason.. is it cos you have abs or what.. i'm in the delima of wether to turbo the b16a or just buy a crv and turbo that or do both crvtec turbo... i dunno what i should do .. so many options

freakin
01-23-2005, 12:59 PM
I have a fully loaded car. That's why it's so crowded in there. The A/C and cruise control taking up the large majority of it, but the ABS unit is quite large as well.

I'd go B20 if I were you. Might as well for the work it's going to take. Just get a bottom end for $300 or so, replace, the rod bolts, and put your B16 head on it (or just go non-VTEC). It's compression ratio is low 9's, so it's perfect. If you're going to boost it, I'd put a block gaurd in it though. The sleeves are pretty thin with the larger bore.

You should talk to Rob if you get a chance. He has a tubro B20VTEC in his CRX. The thing is stupid fast.

PS, I have a B20 block gaurd for sale. I didn't get it in time before I sent my block out for machining, so I decided not to put it in. I'll give you a good deal on it if you're interested:
http://www.members.shaw.ca/matteakin/acura/B20blockgaurd.JPG

b16Ateg
01-23-2005, 08:08 PM
ya i know rob.. he was using my buddies hondata for his tuning .. but i dunno.. i want to do crvtec cos i want to keep vtec but i want the lower compression for the turbo part... i have never rode in robs car but from ppls i hear it is crazy but his car is in peices again i have heard.. but ya.. its a big delema cos i dunno how much it would cost me to run a stock crvtec installed and shit.. but ya.. how much for the block gaurd..

Speed_Dreams
01-23-2005, 11:26 PM
logan just swap my motors and you can have a turbo B18 and I'll roll with the B16 it will be fun what do you say?

freakin
01-24-2005, 12:20 AM
I just put it up for sale for $80. But if you have anything that I might need, I'd consider a trade.

freakin
01-25-2005, 08:36 AM
Check it out......I finally got my winter beater. Too bad I didnt' have it for last weekend's autox.....:poosie:

It's a 2.3L intercooled turbo setup (around 160HP) with a 5 speed and it's RWD. The shot of under the hood didn't turn out, so I'll get some more. The best part about all of this is that I bought the car for $500. I have big plans for this car once it's parked and my teg is rolling again. :bigpimp:


http://www.members.shaw.ca/matteakin/Volvo/740_before_1.jpg
http://www.members.shaw.ca/matteakin/Volvo/740_before_3.jpg

Moonracer
01-25-2005, 10:02 AM
Nice Mat, I like those older volvos. I always wanted one for my mountain biking vehicle and you can't beat that price! :thumbsup:

frozenrice
01-25-2005, 08:44 PM
Nice ride Matt. We'll have to do a wagon run aside from the Teg cruises:

http://img.photobucket.com/albums/v219/frozenrice/wagon1.jpg


http://img.photobucket.com/albums/v219/frozenrice/wagon.jpg

BTW, anybody know where I can get lowering springs for this thing?

freakin
01-26-2005, 11:17 AM
Originally posted by frozenrice

BTW, anybody know where I can get lowering springs for this thing?

This should help your height problem on the wagon.....
http://www.nolansupply.com/lgimages/87560134.jpg
I'm sure there's something for the camry.....it likely shares a chasis with something in the toyota line that might work. I really don't have a clue though.


If you're still interested in a wagon run, I'm going to take the wagon one of those drift nights this year. After I mod it a little. Take a look through this article:
http://www.mcbrooms.com/volvo/fast700.htm
I'm hoping to have it up to the "Stage 2: Estimated 230 to 260 BHP" part of the article by late spring. :burnout:

Of course, I'll have to take out the car seats and the soccer balls. :rofl:

mutsuraboshi
01-27-2005, 03:34 AM
is there a good forum site dedicated to da owners?
im looking into getting one and would like ot learn a bit more about them first

Moonracer
01-27-2005, 04:10 AM
Originally posted by mutsuraboshi
is there a good forum site dedicated to da owners?
im looking into getting one and would like ot learn a bit more about them first

Yup there is G2IC.com (http://www.g2ic.com) You'll find everything you need to know there and then some. Goodluck with your search. :)

Moonracer
01-27-2005, 01:34 PM
Hey guys I'm trying to organize a 403honda meet for the world of wheels. The more hondas the better so if you're in then post here or if you are a member of the 403 then post there too. Click link for thread and info.

**Info** (http://forums.403honda.com/showthread.php?s=&postid=336257#post336257)

b16Ateg
01-27-2005, 03:42 PM
i'm in just give me date..lol

lam-boy
01-27-2005, 04:02 PM
I'm in, give me a date so I can ask for the day off.

Moonracer
01-27-2005, 04:44 PM
Info is in the "info" link I included...lol But here is the link to the W.O.W. site

Clicky (http://www.autorama.com/casi/calgary.htm)

It's feb. 18 to 20th. I was thinking of the saturday to go as long as it works for everyone of course.

Speed_Dreams
01-27-2005, 06:16 PM
Well fellas i am investing in a parts teg to get some many needed parts for my car ( Axles!!) Just to let you guys know that i will be selling the parts from this car cheap to help all you other guys out there that are broke. Im not looking to make any money on this just to help and hook some brothers up so let me know what you need. I am getting the car on Saturday.

powerslave
01-27-2005, 06:33 PM
Originally posted by Speed_Dreams
so let me know what you need.

I call the coin tray! In your face Sandino :D

frostyda9
01-27-2005, 06:54 PM
Originally posted by powerslave


I call the tail lights!

:thumbsup:

b16Ateg
01-27-2005, 07:15 PM
i call the headlights

frozenrice
01-27-2005, 07:43 PM
Can you describe the car? Year? 2 door/4 door, interior/exterior colour? I'll take the sidemarkers if there is any and maybe the valve cover.

Speed_Dreams
01-27-2005, 08:01 PM
Originally posted by frozenrice
Can you describe the car? Year? 2 door/4 door, interior/exterior colour? I'll take the sidemarkers if there is any and maybe the valve cover.

Its a 91 , red 2 door GS black leather interior i dunno about kms. stock ride height the bottem end of the motor has seized from what i have been told. The place i am getting it from has taken some parts. from what i have seen they took the headlights ( sorry logan ) the tail lights ( sorry phil ) the ECU the ABS modual and the power door locks ( sorry Drew Danmit) but dave has already called the leather seats for undiscloded smokin deal. i will post pics when i get the car.

dirty_magic
01-27-2005, 08:08 PM
Dave you bastard, I need those front seats, haha, oh well. what about the hood? 91, that must be rio red then.

Speed_Dreams
01-27-2005, 08:31 PM
from what i have seen the hood in good shape. but i didn't really look closly at it....just enough to pop it. but shipping a hood would be pricy if you wanna pay for it