The Official 2nd Gen Integra Thread

[tson]

YEA!! get my car back today !! any one got the pipe for cold air? lol

[freakin]

I think I'm picking up an AEM unit, so if you wait until the weekend, I'll sell you mine. I'm keeping the 90 degree bend and coupler at the end, so your filter would sit between the battery and fender (like stock).

http://members.shaw.ca/matteakin/acura/B18/teaser_installed.jpg

[tson]

aww i want the bend =((

[tson]

any one got strut bar as well?

[frostyda9]

Matt...my cell minutes are getting f'd this month. I'm PM you instead :rofl: Looks like I *have* to do brakes this weekend, the wheel gets so hot now I can barely touch it :thumbsdow

[BebeGirl]

Just to let you guys all know that the meets are not every sunday now, Please go to to find out our events/meets dates

www.abtegs.net .

And I just wanted to know if any of your are interested in entering with our team at Calgary DTP June 10th 2006. Its held at the calgary olympic Oval. If so could you please leave me PM and let me know ASAP. Thnx Guys

- Jennifer

[frostyda9]

How YOU doin Jenn? :rofl: Nice of you to check in

[BebeGirl]

Good thnx hun hehehe yah I thought I should post plus the car show is 3 1/2 weeks away we need more ppl and cars hahaha:clap: so start recruiting

[jmeriel]

the camber kit i bought is from evotion...hey matt is it possible for a new cable to make this grinding(hamster wheel sound) i am certain its the cable or whatever is connected to it...i ran the car with just the cable connected to the tranny and the sound comes from the cable...the sound changes/lessens when i push the little thing that rotates when the car is running!(not sure what its called...)

after installing the camber kit...will i be able to drive the car...won''t that mess up the alignment??? then where can i take the car for alignment...the ppl from tirecraft said "where not really interested if you install the camber kit yourself"
ohh i went to the tirecraft at mcleod trail...near hooters.
thanks for all your help...

[frostyda9]

As always, I'll suggest Alvin Automotive. They have been nothing but good for me, and they have done two alignments for me now. They are sort of geared towards the import crowd/cars, which I find is a good thing :thumbsup:

[jmeriel]

i'll go look up alvins......thanks...

i'm confused with the cable...check this out - if the cable is the culprit ...then why don't i here any noise when i plug the speedo cable to the cluster then i attach a drill to the outher end and reverse...the speedometer will hit up to 100km/hr with no sound:dunno: if the cable or cluster makes the hamster wheel noise then i should here that sound when i attach it to the drill....but i don'tmmmmmm:nut:

[Talonstylz]

Originally posted by jmeriel
i'll go look up alvins......thanks...

i'm confused with the cable...check this out - if the cable is the culprit ...then why don't i here any noise when i plug the speedo cable to the cluster then i attach a drill to the outher end and reverse...the speedometer will hit up to 100km/hr with no sound:dunno: if the cable or cluster makes the hamster wheel noise then i should here that sound when i attach it to the drill....but i don'tmmmmmm:nut:


time for a new car.:nut:

[jmeriel]

nah ...i'd rather fix this problem....i don't give up that easy ;)

[freakin]

Originally posted by tson
aww i want the bend =((

They're about $20-$30 at mopac. I'm going to use it on my CRX though. It looks like I'll have my AEM intake soon, so yes, I can sell you my intake now if you like. How does $60 sound for the pipe?


If you're looking for strut bars, then take a look at the Megan ones at Custom Auto. That's what's on my car. They're nicer than the cheapo Vibrant ones but they're still under $100. I had to monkey a bit for it to fit over my ABS stuff, but it'll work. If you don't have ABS, then it'll fit beautifully. I did have to remove the little diaphragm on the side of the throttle body for it to work though. All it does is help with cold starts, so I didn't need it.


Originally posted by BebeGirl
Just to let you guys all know that the meets are not every sunday now, Please go to to find out our events/meets dates

www.abtegs.net .

And I just wanted to know if any of your are interested in entering with our team at Calgary DTP June 10th 2006. Its held at the calgary olympic Oval. If so could you please leave me PM and let me know ASAP. Thnx Guys

- Jennifer

I'll be out of town that weekend, and I'd be embarassed to show it with that rust hole starting on the rear quarter....hopefully that'll be fixed for next year. So does this mean abtegs is back up again?



Originally posted by jmeriel
i'll go look up alvins......thanks...

i'm confused with the cable...check this out - if the cable is the culprit ...then why don't i here any noise when i plug the speedo cable to the cluster then i attach a drill to the outher end and reverse...the speedometer will hit up to 100km/hr with no sound:dunno: if the cable or cluster makes the hamster wheel noise then i should here that sound when i attach it to the drill....but i don'tmmmmmm:nut:

At this point, I'd try your luck on www.g2ic.com, someone on there might have had the same problem. It's a pretty good site for day to day problems on our cars.

[BebeGirl]

abtegs is up and running again with a new site address though, new server etc so we wont have the problem again of it crashing on us every month or so,and new ppl run it hahaha

www.abtegs.net

[frozenrice]

Hey Jen. Thanks for the message. The abtegs site is now much more stable and much faster now too. I thought you guys would have heard by now. Sorry I didn't mention anything sooner.

[frostyda9]

You did Mike, a few pages back ;)

[frozenrice]

I obviously know what I'm doing.............
So have any deals been made with Talonstylz yet? Let me know by tommorrow night and I'll try to organize the pickup/dropoff. Also, please make your own payment arrangements - I'd rather not get involved with that part.

[frostyda9]

On a side note, I am here now to ask...no...to BEG.. if anyone has a spot in their garage I can use this weekend. My rear rotors are going to break off pretty soon if I don't get to them. Name your price, I'm happy to throw some cash to anyone who can help me out...

[frozenrice]

Dave I'd help you out but I'm out of town. Sorry man. If you can wait until the later part of the weekend (Sunday/Monday) we see if we can work something out.

[freakin]

I'd offer my garage, but I don't have room to park a car in there yet. I'm in the middle of a huge cleanup....so far it's taken a week.

[Talonstylz]

so, noone interested in any teg parts? wtf? i'm ready to start stripping this car, everything must go.:burnout:

[frostyda9]

Yeah...and therein lies the problem. Everyone is out of town or away from home over the long weekend :banghead:
I'll figure something out, but thanks for the sentiment Mike.
Condo living is starting to really piss me off.

[freakin]

Dave, I'll make you a deal. If you stop by and help me clean up the garage, you can use it afterwards. Do you have a set of jackstands? All 4 of mine are currently holding the other car up.

[frostyda9]

You drive a hard bargain, but I'm game assuming it's not an 8 hour clean up job. I don't have stands anymore. Ever since I moved I just use a pair of low-pro Honda jacks :D

[jmeriel]

frostyda9...i live in the NE...and have a garage if you can do it tom..thursday pref morning or early afternoon or friday same time...then you can use my garage...i have 4 jackstands & 2 jacks...and some tools...
oh matt (freakin)i tried oiling the speedo cable and it got better...i barely here the sound but its still there....i just turn the radio up!!! again thanks for the advice...
a friend sold me his dc ceramic coated header(100) from b18b...easy install right????

[frozenrice]

Dave, if all else fails, and you're really desperate, there's a place in the NE called "U-wrench" where you can rent a service bay.
I think there's also one in Inglewood too but I can't remember the name of it.

[freakin]

Dave, it may involve a dump run, but that's about it. Mostly I just need a hand putting some stuff up on the walls, and moving some crap (like my new roll cage :poosie: ). I can put some wheels on the back of the car and take the jackstands out.

jmeriel, glad to hear that the oil idea worked....mike suggested it first though....hehe, I'll give him props for that. The header install is pretty straight forward if it's meant for your car. I assume it's a 4-2-1, 2pc. header, so it goes in like stock. Just mock it up beside your stock downpipe to make sure it's the same length to the cat. If it's the same, then just soak the bolts over night with some penetrating oil (don't drive the car at this point, it'll just burn off), then take the manifold off and replace it with the header. A 4-1 will require some notching of the front crossmember and I dont' suggest it unless you're on a hoist and have access to a welder to put in a gusset.

Mike, Talonstylz have worked out what parts I need and they're supposed to be ready for this weekend. If you're still willing to pick up parts for me, would you mind PM'ing him today and figuring out when you two would meet up? Then I can just slip you some gas money once you're back and I pick up the parts. Sound like a deal?

[jmeriel]

oh really...thanks MIKE :thumbsup:

[QuasarCav]

Matt, Jackstands are only 5 min away!

If you need a hand with the header let me know, mine wasn't fitting quite rigth so I've had it off and on a few times. Just WD-40 the hell out of it. The hardest part for me was the 02 sensor pigtail.

[freakin]

^^^ Which I had a socket for. I should stop by and grab that soon.

[jmeriel]

the header is a 4-1 :( ...what is a gusset?

[QuasarCav]

Originally posted by jmeriel
the header is a 4-1 :( ...what is a gusset?


It's reinforcement so you aren't just cutting a notch in the x-member and leaving it. I think the metal on the edges of the cut is folded in for strength, more work than a simple header install.

[freakin]

To give you an idea of how it fits, this is my DC 4-1 header on my car. The crossmember is cut and there's a plate welded in to cover the hole and maintain the structural integrity. We also had to remove the brace that runs down the middle and ties the front and rear corssmembers together. You can see the empty bolt holes in the pic. The other option is to replace the crossmember with an aftermarket one and traction bars.

http://www.members.shaw.ca/matteakin/acura/B20/headerclearance3.jpg
http://www.members.shaw.ca/matteakin/acura/B20/headerclearance2.jpg

[QuasarCav]

Originally posted by freakin
To give you an idea of how it fits, this is my DC 4-1 header on my car. The crossmember is cut and there's a plate welded in to cover the hole and maintain the structural integrity. We also had to remove the brace that runs down the middle and ties the front and rear corssmembers together. You can see the empty bolt holes in the pic. The other option is to replace the crossmember with an aftermarket one and traction bars.

http://www.members.shaw.ca/matteakin/acura/B20/headerclearance3.jpg
http://www.members.shaw.ca/matteakin/acura/B20/headerclearance2.jpg


Why is your header so sweaty? Are you playing richard simmons DVD's in the garage?

[danlowteg]

Well i got bad news i just sold the teg
http://i16.photobucket.com/albums/b37/danlowteg/66876.jpg
And I Got This
http://i16.photobucket.com/albums/b37/danlowteg/lotus_elise_14.jpg
Here Is Matt Riding To Catch Up With Me (I Think Its Matt I Found It In Your Pics)
http://i16.photobucket.com/albums/b37/danlowteg/arfscooter.jpg

[QuasarCav]

Originally posted by danlowteg
Well i got bad news i just sold the teg
http://i16.photobucket.com/albums/b37/danlowteg/66876.jpg
And I Got This
http://i16.photobucket.com/albums/b37/danlowteg/lotus_elise_14.jpg
Here Is Matt Riding To Catch Up With Me (I Think Its Matt I Found It In Your Pics)
http://i16.photobucket.com/albums/b37/danlowteg/arfscooter.jpg


You wouldn't fit in that car white boy.

The DA on the flat-deck looks really good though!

[freakin]

HAHAHA, that's a pic of my buddy Arf. He lost a bet so he had the choice to run across the street naked or buy us a flat of beer. He chose to go pick up our pizza from Little Ceasar's on a scooter while it was snowing.

Then when he went and asked for a 'meat lover'.....'are there any meat lovers in here?!?!'

Then the cops showed up and harrased us. That was a fun night.

http://www.members.shaw.ca/matteakin/arf%20little%20ceasers.JPG

[freakin]

So why is the car on the flat deck? Did you give up already? And where are you taking it? You should talk to Darren (78si) if you need it back quick. He's the one I keep asking when I get stuck on the wiring.

PS, Dan, stop stalking me! :)

I'll start a flat deck thread....they're fun:

http://www.members.shaw.ca/matteakin/acura/delivered2.jpg
http://www.members.shaw.ca/matteakin/acura/delivered.jpg

[danlowteg]

Originally posted by QuasarCav



You wouldn't fit in that car white boy.

The DA on the flat-deck looks really good though!

what i sat in one very nice and roomy i liked it:thumbsup: thus i got one ;)

[danlowteg]

Originally posted by freakin
So why is the car on the flat deck? Did you give up already? And where are you taking it? You should talk to Darren (78si) if you need it back quick. He's the one I keep asking when I get stuck on the wiring.

PS, Dan, stop stalking me! :)

I'll start a flat deck thread....they're fun:


your page was right there so i copyed and pasted :D Its on a flat deck because my guy should be able to figure out whats wrong im stumped

sitting at the shop

http://i16.photobucket.com/albums/b37/danlowteg/668761.jpg

[freakin]

Is that an old Datsun Z in the pic? Nice car. :thumbsup:

And it's hillarious, your car looks exactly like that model I have in my room. Flat black and black wheels. woot!

[danlowteg]

because we are doing the flat deck i got one more and yes its a datsun z i wanna buy it :D http://i16.photobucket.com/albums/b37/danlowteg/645ruuyfguy.jpg

[frostyda9]

Originally posted by freakin
HAHAHA, that's a pic of my buddy Arf. He lost a bet so he had the choice to run across the street naked or buy us a flat of beer. He chose to go pick up our pizza from Little Ceasar's on a scooter while it was snowing.

Then when he went and asked for a 'meat lover'.....'are there any meat lovers in here?!?!'

Then the cops showed up and harrased us. That was a fun night.

http://www.members.shaw.ca/matteakin/arf%20little%20ceasers.JPG

OMG :rofl: :rofl: :rofl:

[frozenrice]

Originally posted by jmeriel
oh really...thanks MIKE :thumbsup:


Matt, thanks for the credit but none will be taken since it's a Tegtip from G2IC that I just did on my car recently. Your idea about the bike chain grease...........I'll have to try that because my cable isn't 100% yet.

PMd you about your parts from Talon.

[frostyda9]

Finish Line bike products pwn all. Bump for page 100....

[Talonstylz]

anyone else need anything while i'm takeing parts off for freakin? Frozen is picking them up on sunday, heres your chance to save on shipping if you guys are nice enough to frozen.:thumbsup:

and bump for page 100.:D

[freakin]

Here's a legitamate bump.....Since we're on a pic binge, here are some pics of my progress.....not the teg, but still a Honda:

http://www.members.shaw.ca/matteakin/EF/garageside.JPG
http://www.members.shaw.ca/matteakin/EF/noengine.JPG


The cage I picked up from Illeagle:

http://www.members.shaw.ca/matteakin/EF/cage.JPG


Here's the engine I'm running until I get the wiring and suspension sorted out, JDM 2nd Gen B16

http://www.members.shaw.ca/matteakin/EF/B16/DSCN4506.JPG
http://www.members.shaw.ca/matteakin/EF/B16/DSCN4518.JPG
http://www.members.shaw.ca/matteakin/EF/B16/NA-B16.JPG


And here are the parts I picked up earlier tonight....I'm going to build another motor with lower compression for this setup...but thought I'd mock it up to see how they fit. I'm likely going to build another N/A B20 in between, but here are the pics anyhow

http://www.members.shaw.ca/matteakin/EF/B16/FI-B16.JPG
http://www.members.shaw.ca/matteakin/EF/B16/coldside.JPG

[frozenrice]

Clean up that garage will ya?

[Genjuro]

talon, how much for your intake manifold, alternator, rear suspension, headers?

[freakin]

Originally posted by frozenrice
Clean up that garage will ya?

I'm already on it. I own dave for the weekend. :D


Originally posted by frostyda9
You drive a hard bargain, but I'm game assuming it's not an 8 hour clean up job. I don't have stands anymore. Ever since I moved I just use a pair of low-pro Honda jacks :D

[Moonracer]

Did I mention I hate you Matt! ;)

[freakin]

You haven't lately...so get it off your chest. :rofl:

So who's coming to the track tonight? I'm addicted and it's going to start getting expensive. :burnout: :burnout:

[QuasarCav]

Page 100 so close,


Teggy's got blades!!!!!!

Matt, still want the Sir's, Either that or I'm keeping them for a while.

[freakin]

I picked up a pair of fat fives last night. :bigpimp:

...But let me know what you want for the SiR wheels.

[Talonstylz]

Originally posted by Genjuro
talon, how much for your intake manifold, alternator, rear suspension, headers?

make me an offer, as long as its reasonable there yours...

[Moonracer]

Originally posted by freakin
You haven't lately...so get it off your chest. :rofl:

So who's coming to the track tonight? I'm addicted and it's going to start getting expensive. :burnout: :burnout:

Well I should be going to the track tonight although I can't find my house keys right now so I hope they're in the car. If not I'm gonna be pissed.

[danlowteg]

looks good matt

[danlowteg]

also forgot to metion that my teg is up for sale the block has crack and i dont have any money left and i have found something to replace the old girl if any of you guy want it its $3500
http://forums.beyond.ca/showthread.php?s=&postid=1537761#post1537761

[stevieo]

shit dan didn't know you are selling the ride!
long time no post!

how is everyone/

[stevieo]

and im here to steal 100 HAHAHA yeah im a jackass

[danlowteg]

lol you won a socket but you dont count so i win :D

[freakin]

Damn Dan, are you sure you don't want to wait out another LS motor and put one in? If you do end up selling that car, I need to snag the PR3 ECU back. I'll give you the P28 and the components to chip it. I need to run my motor non-chipped for the break-in on that PR3.

PS, 100 is for chumps....people in the know know that 101 is where it's at. :thumbsup:

[danlowteg]

ill snag it back but yah i found somthing that has 850 cc's for that price

[freakin]

what about the winter? :nut:

Besides, you can ride that pocket bike to work. :rofl:

[frostyda9]

Matt...quit post whoring on Beyond, load that stuff in your car, and get down to the track :D

As far as everyone knows, Race City is good to go for tonight?

[danlowteg]

volvo for the winter

[gen2teggy]

danlowteg
my gf might be interrested in your tegggyyy
can u PM me your number?

[danlowteg]

pmd ya gen

[Genjuro]

Originally posted by Talonstylz
intake manifold, alternator, rear suspension, headers

make me an offer, as long as its reasonable there yours...

not sure what a good price is for them. whats the condition for the list? I MIGHT head up on sunday, but will let you know.

thanks

[Talonstylz]

Originally posted by Genjuro


not sure what a good price is for them. whats the condition for the list? I MIGHT head up on sunday, but will let you know.

thanks

well i mean there used parts, not much more i can say about them.

I was thinking in the range of 200, does that sound fair or no? Let me know what you think, and we'll work with it.

[Genjuro]

what's the kms and condition for the parts/cars so i can work with that i guess?
add me to msn if you like. could make this easier: [email protected]

[Talonstylz]

Originally posted by Genjuro
what's the kms and condition for the parts/cars so i can work with that i guess?
add me to msn if you like. could make this easier: [email protected]

added

[freakin]

check these out....Vik found some pics of me at one of the winter auto-x events back in January. This is basically a sequence of my drifting around a long corner, losing control, and keeping my foot in it to get it back straight. Damn I miss my Volvo....

http://www.rallysport.ca/photos/Rallycross_Jan29_06/images/IMG_7484.jpg
http://www.rallysport.ca/photos/Rallycross_Jan29_06/images/IMG_7485.jpg
http://www.rallysport.ca/photos/Rallycross_Jan29_06/images/IMG_7486.jpg
http://www.rallysport.ca/photos/Rallycross_Jan29_06/images/IMG_7487.jpg

[frostyda9]

You? With your foot on the floor, sideways in the brick? I never would have expected that ;)

I got the rotors/pads done yesterday :clap:
Just another thing off the checklist for my 2000km trek this summer :thumbsup:

How's everyones long weekend going?

[Talonstylz]

Got the car on the dyno, everything stock except for a short ram intake. The car is also auto...
put down 118tq and 115 hp

http://i34.photobucket.com/albums/d126/talonstylz/cars/20-05-06_1402.jpg

its a mustang dyno, and there is the proof theres an awd dyno kickin around in edmonton.:D

[tson]

damn trying to find side markers are tough bah tegras would look pretty sick with amber side markers hows everyones rides coming along? and whens the next meet at?

[freakin]

Just to rub it in, hehe. One day I'll actually get around to painting them black. :D

But as far as my car goes....I screwed up my ABS at the track on Friday. My brake fluid boiled over and now my ABS pump runs as soon as I step on the brakes and doesn't stop for a couple of minutes....then no ABS anymore. I think I'm just going to rip it out of the damn car. Mind you it did save me from my bad driving a couple of times before I toasted it last night.

http://www.members.shaw.ca/matteakin/acura/New_Toys/JDM%20fenders.JPG

[Talonstylz]

Originally posted by freakin
Just to rub it in, hehe. One day I'll actually get around to painting them black. :D

But as far as my car goes....I screwed up my ABS at the track on Friday. My brake fluid boiled over and now my ABS pump runs as soon as I step on the brakes and doesn't stop for a couple of minutes....then no ABS anymore. I think I'm just going to rip it out of the damn car. Mind you it did save me from my bad driving a couple of times before I toasted it last night.

http://www.members.shaw.ca/matteakin/acura/New_Toys/JDM%20fenders.JPG

:drool: :drool:

i want......

[tson]

MANNN U BASTARD!!! IO WANTTTT!!!!! haha are those dc2 fenders?

[freakin]

Nope, DA6. DC2's are the 94-01 Integras.

[db1]

for the side markers just go to honda and ask for s2000 side markers. they work perfectly. all you gotta do is cut out the fender and stuff.. did it to my teg. there amber and everything, looks sick..

[freakin]

True, but I got mine cheaper than it would've cost for just the markers....and I needed new fenders anyhow. Either way...not hard to do.

[jaylo]

Originally posted by db1
for the side markers just go to honda and ask for s2000 side markers. they work perfectly. all you gotta do is cut out the fender and stuff.. did it to my teg. there amber and everything, looks sick..

That is correct, they are the exact same as the DA version except the markings that are embossed on the lens.

I still have the socket for the bulbs kicking around if anyone wants to do the conversion.

[Talonstylz]

some parts that are left.....

http://forums.beyond.ca/showthread.php?s=&threadid=131654

[rey_mysterio]

that link didnt work for me?

[Talonstylz]

Originally posted by rey_mysterio
that link didnt work for me?

fuckers deleted the thread for some stupid reason, oh well, try this one.

http://forums.780tuners.com/showthread.php?s=&threadid=42655

[Talonstylz]

freakin: are the moldings on there the thin jdm ones? if so would you sell me just the 2 moldings? I dont know if you'll be using those or your factory matched ones.

thanks.

[91VTEG]

hey guys i can no longer attend a cruise if you guys have one, i just sold my teg :cry:

[rey_mysterio]

how much u sell it for??:dunno:

[freakin]

Hey Rey,
How's the new motor working out? I saw your car over at Darren's getting a transplant a couple weekends ago.

Oh, and yes those are thin moldings. And yes, I'd part with them....I'm putting on some GSR 'VTEC' ones, because I'm a nerd.
I'll trade you for some OEM grey floormats if you have them. I'll be in Edmonton in a couple of weeks, so we can meet up.

And Jaylo, did you get my PM about the batter tie downs? Everytime I open my hood, it gets a lot of great comments. If you decide to make a batch of them, I can easily unload 5 of them right now. I personally need one for the CRX....:bigpimp:

[91VTEG]

Originally posted by 91VTEG
hey guys i can no longer attend a cruise if you guys have one, i just sold my teg :cry:

11g's

im getting a new golf though pumped about that :thumbsup:

[jaylo]

Originally posted by freakin
Hey Rey,
How's the new motor working out? I saw your car over at Darren's getting a transplant a couple weekends ago.

Oh, and yes those are thin moldings. And yes, I'd part with them....I'm putting on some GSR 'VTEC' ones, because I'm a nerd.
I'll trade you for some OEM grey floormats if you have them. I'll be in Edmonton in a couple of weeks, so we can meet up.

And Jaylo, did you get my PM about the batter tie downs? Everytime I open my hood, it gets a lot of great comments. If you decide to make a batch of them, I can easily unload 5 of them right now. I personally need one for the CRX....:bigpimp:

Your mailbox was full, yea for the tiedowns I only made two, the one you have and mine.

If you have 5 potential buyers I will make a bunch of them.

Let me know.

[jmeriel]

i'll take one of those battery tie downs too ...

[freakin]

Originally posted by 91VTEG


11g's

im getting a new golf though pumped about that :thumbsup:

:eek: :eek: How the hell did you get 11g's for your car? Don't get me wrong, your car was in good shape, but that's a lot of cash.


Originally posted by jaylo


Your mailbox was full, yea for the tiedowns I only made two, the one you have and mine.

If you have 5 potential buyers I will make a bunch of them.

Let me know.

Jay,

If you're interested in making some, I would say that 10 would be a good number. I can arrange everything and make a sort of group buy on them. Just let me know what you think they'd cost if you made that many. My inbox should be free now. I'll start a list here as well as on G2IC and what not....then once we've got 10, I'll collect the money, get it to you and then you can work on them. The EF guys are liking them as well....so it won't be hard to move them if they're anodized and pretty looking.



Originally posted by jmeriel
i'll take one of those battery tie downs too ...

See how easy that was, hehe.

[frozenrice]

don't forget to count me in too Matt. You know I've been wanting one for a while now........

talon, I forgot to ask you if the floor mats from either of your four doors are in any decent shape if they still got them in there.

[danlowteg]

Originally posted by 91VTEG


11g's

im getting a new golf though pumped about that :thumbsup:
yah how the hell did you do that

[frostyda9]

There were two pounds of weed in the trunk :D

[frozenrice]

forget boost, vtec and all that crap.......look at what I just bought:

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=8069002787&ssPageName=ADME:B:SS:CA:1

j/k!

[stevieo]

hey what do those battery tie downs look like?!