PDA

View Full Version : The Official 2nd Gen Integra Thread



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 [52] 53 54 55 56 57 58 59 60 61 62 63 64 65

freakin
02-14-2007, 08:12 PM
I need a B18 bottom end to build another motor with. I was just going to experiment with that B16 bottom and build a block gaurd for it....then if I mess it up, no big deal.

jaylo
02-15-2007, 03:10 AM
Has anyone have experience on replacing the front stabilizer links and the lower control arm ball joints?

I am replacing mine soon and can anyone give me tips on these items, thanks!

freakin
02-15-2007, 09:39 AM
Just spray a ton of penetrating oil on them a day beforehand and then go over the threads with a wire brush. It's a pretty simple job, just make sure that the threads are clean. Also, put in some poly bushings if you can, or at the very least, replace the OEM ones.

headache09
02-15-2007, 09:50 AM
i got a 2nd gen b16 db1 not 1st gen.

QuasarCav
02-15-2007, 10:00 AM
It will be the summer of VTEC.

meotch
02-16-2007, 03:25 PM
new to calgary, just drove the teg out from Ontario......
everything on the car has been done on my own with the exception of the body work and the motor install.

the lowdown:

1992 Integra Ls
00' b16a2
JDM 1 piece headlights
91 tail lights
chipped P28
4-2-1 Header
2.5" custom exhaust (header back)
Nuspeed front strut bar
full bushing kit
18's (not on car now)
shaved handles
pearl white

The car had sat for a bit while I was putting my new kit together,
57 Trim T3 Stage .48/.70 AR w/knifed compressor wheel
23x18x3.5" Intercooler
Custom Log Mani
DSM 450cc injectors
no-name bov......
endless clamps couplers and misc. shit..

*looking for following items:
- 38mm WG
- Tuning S200/300 or Neptune/chrome
- Oil Lines

here are some pics, hopefully it will be on the road for the spring so I can come on some cruises!!

cheers,

mitch


http://i60.photobucket.com/albums/h22/meotch/P1010034.jpg

http://i60.photobucket.com/albums/h22/meotch/yap.jpg

frozenrice
02-16-2007, 04:59 PM
Welcome to Calgary Mitch. That's a great car. Oddly at first glance it looks a lot like frostyda9's car. You'll definately need to come out to a G2 meet sometime. We need some new blood since most of the OGs have ditched their G2s.

Quasar, does this mean you have a GSR now?

QuasarCav
02-16-2007, 05:03 PM
Originally posted by frozenrice
Welcome to Calgary Mitch. That's a great car. Oddly at first glance it looks a lot like frostyda9's car. You'll definately need to come out to a G2 meet sometime. We need some new blood since most of the OGs have ditched their G2s.

Quasar, does this mean you have a GSR now?


Almost, the CN rail strike is holding up B17a's new car. I'm not too worried though because I need to spend some quality time with teggy.

danlowteg
02-19-2007, 05:25 PM
Originally posted by meotch
new to calgary, just drove the teg out from Ontario......
everything on the car has been done on my own with the exception of the body work and the motor install.

the lowdown:

1992 Integra Ls
00' b16a2
JDM 1 piece headlights
91 tail lights
chipped P28
4-2-1 Header
2.5" custom exhaust (header back)
Nuspeed front strut bar
full bushing kit
18's (not on car now)
shaved handles
pearl white

The car had sat for a bit while I was putting my new kit together,
57 Trim T3 Stage .48/.70 AR w/knifed compressor wheel
23x18x3.5" Intercooler
Custom Log Mani
DSM 450cc injectors
no-name bov......
endless clamps couplers and misc. shit..

*looking for following items:
- 38mm WG
- Tuning S200/300 or Neptune/chrome
- Oil Lines

here are some pics, hopefully it will be on the road for the spring so I can come on some cruises!!

cheers,

mitch


http://i60.photobucket.com/albums/h22/meotch/P1010034.jpg

http://i60.photobucket.com/albums/h22/meotch/yap.jpg

i think i have chatted with you on g2ic mitch. welcome to calgary

78si
02-19-2007, 05:45 PM
Does anyone need a brand new exedy stage 2 clutch kit - thick version? $450
http://www.clutchcityonline.com/acura_racing_integra.htm

08-950A

B17a
02-20-2007, 05:03 PM
Originally posted by QuasarCav



Almost, the CN rail strike is holding up B17a's new car. I'm not too worried though because I need to spend some quality time with teggy.

:( :( I would love nothing better than to hand off the old girl to you asap.....so if you know any CN rail employees, tell them to get their asses back to work!:D

danlowteg
02-21-2007, 09:43 PM
BUY ME!!!
http://forums.beyond.ca/showthread.php?s=&threadid=166221

QuasarCav
02-22-2007, 09:19 AM
Originally posted by danlowteg
BUY ME!!!
http://forums.beyond.ca/showthread.php?s=&threadid=166221


Although this is Beyond you and I both know that price is out to lunch.

danlowteg
02-22-2007, 10:23 AM
Originally posted by QuasarCav



Although this is Beyond you and I both know that price is out to lunch.

try to find one like mine quasar then we will talk

QuasarCav
02-22-2007, 10:38 AM
Originally posted by danlowteg


try to find one like mine quasar then we will talk


That does not really make it desirable, find another Isle Green Pearl 2dr Integra!

They are nice cars though, get ready for the Leb low-balling.

stevieo
02-23-2007, 07:11 PM
Originally posted by QuasarCav



That does not really make it desirable, find another Isle Green Pearl 2dr Integra!

They are nice cars though, get ready for the Leb low-balling.

HAHAHAAHAHAH FUCKING LEWIS ahah thats funny man.

yeah dan, to me its still old and not worth 6500 or whatever you posted.

QuasarCav
02-24-2007, 03:36 PM
Hey Steve, I met the new owner of your car. He sold me some SiR rims. Seems like a cool guy and he has started modded the ol' Integra pretty well. He is on the board as Headache09.

stevieo
02-24-2007, 04:52 PM
Originally posted by QuasarCav
Hey Steve, I met the new owner of your car. He sold me some SiR rims. Seems like a cool guy and he has started modded the ol' Integra pretty well. He is on the board as Headache09.

I think he just finished putting in a B16 in the engine bay as well!

frozenrice
02-24-2007, 05:05 PM
I gather that he wasn't the "JDM" guy. I remember dabate over the JDMness of Steve's old Teg :rofl: .

danlowteg
02-26-2007, 09:20 PM
well i guess it is almost time for a meet. mike we need to plan something

Talonstylz
02-26-2007, 09:32 PM
Anyone has any 5-speed axles they wanna sell me?:D

freakin
02-26-2007, 10:57 PM
I don't have any axels, but they're only $90 after the core for new (referb.) at a parts store, and you usually get a 1 year warranty on them. When I did the b-series swap on my CRX, I just gave them and old D-series axle and an Accord axle for the cores.

Talonstylz
02-26-2007, 10:59 PM
hmmm, good call.

frozenrice
02-26-2007, 11:05 PM
talonstylz, the axles are the same whether it be a 5speed or auto. Just make sure you get the correct side for whatever side you need. Also, having ABS makes a difference.

A meet would be kind of nice to get going. It's friggin nuts at work right now though. How about April when there is a better chance of better weather?

BTW, if any of you are on G2IC, here is our (Calgary) local representation and contribution to the site brought to you by yours truly (I got the idea from beyond) :

http://www.g2ic.com/forums/showthread.php?t=162115

http://img.photobucket.com/albums/v219/frozenrice/G2IC%20calendar/mar-2007-1024.jpg

headache09
02-26-2007, 11:06 PM
my cars for sale, maybe someone wants it?
http://forums.beyond.ca/showthread.php?s=&threadid=166837

open to offeres, jsut trying to not loose all the money i put into it

Talonstylz
02-26-2007, 11:13 PM
Originally posted by frozenrice
talonstylz, the axles are the same whether it be a 5speed or auto. Just make sure you get the correct side for whatever side you need. Also, having ABS makes a difference.

A meet would be kind of nice to get going. It's friggin nuts at work right now though. How about April when there is a better chance of better weather?

BTW, if any of you are on G2IC, here is our (Calgary) local representation and contribution to the site brought to you by yours truly (I got the idea from beyond) :

http://www.g2ic.com/forums/showthread.php?t=162115

http://img.photobucket.com/albums/v219/frozenrice/G2IC%20calendar/mar-2007-1024.jpg

well the half shaft is from an abs car, same with the engine/tranny, but my rex is not abs, so what axles should i be getting then?

frozenrice
02-26-2007, 11:24 PM
Sorry didn't mean to confuse the isse. I just threw it in there in case you did have ABS - I found out the hard way. You can use ABS shafts on non-abs cars but not the other way around. In your case, you're fine.

Talonstylz
02-26-2007, 11:29 PM
Originally posted by frozenrice
Sorry didn't mean to confuse the isse. I just threw it in there in case you did have ABS - I found out the hard way. You can use ABS shafts on non-abs cars but not the other way around. In your case, you're fine.

cool thanks.

QuasarCav
02-27-2007, 01:02 PM
ABS sucks on the G2's, it just makes a lot of noise and steers me in wierd directions. Nothing can match my finely tuned right foot.

I'm itching for Summer!!!! Winter tires make baby jesus cry.

freakin
02-28-2007, 12:27 AM
Mine didn't even work, it just made noise as soon as I drove away and ran the pump for a couple of minutes until it shut off. I just pulled the fuse ran without it. Much better in the autocross that way.

jaylo
03-03-2007, 07:13 PM
Originally posted by QuasarCav
ABS sucks on the G2's, it just makes a lot of noise and steers me in wierd directions. Nothing can match my finely tuned right foot.

I'm itching for Summer!!!! Winter tires make baby jesus cry.

Sell me your car! I am a sucker for tan interior!
Trade? hehe

jdmXSI
03-03-2007, 07:51 PM
Hey guys, i lookin to join some kind of DA club here in Calgary, Any one know when some meets will be?:dunno:

jdmXSI
03-03-2007, 09:05 PM
i need some ideas for a cam/valve spring/gears and pulleys!

Any suggestions?

jdmXSI
03-03-2007, 09:06 PM
Originally posted by jdmXSI
i need some ideas for a cam/valve spring/gears and pulleys!


Any suggestions for a B16a1?

frozenrice
03-03-2007, 10:13 PM
This would be the closest you'll get to a DA club in Calgary as far as I know. We are planning to have a meet sometime when the snow and slop clears. Though it's' not an official club, we do keep in touch through this thread. New people are always welcome.

jdmXSI
03-03-2007, 10:26 PM
Cool, I cant wait till the snow clears too, i really want tobring my car back out!

That's good to know theres a DA club!

frozenrice
03-03-2007, 10:36 PM
So do you actually have a RHD XSi? It isn't dark blue by chance is it?

jdmXSI
03-03-2007, 10:39 PM
Yeah how'd ya know?

jdmXSI
03-03-2007, 10:56 PM
Originally posted by jdmXSI
Yeah how'd ya know?

What i meant was, pretty good guess! I thought theres a couple in calgary!lol:nut:

frozenrice
03-03-2007, 11:01 PM
I saw one a while ago. If it was yours, it was at the Auto Value on 37th St. and 17th Ave SW. We chatted a bit.

jdmXSI
03-03-2007, 11:02 PM
Yeah, i remember, i was buying seafoam for my other car. thats right! how ya been?

frozenrice
03-03-2007, 11:13 PM
Cool man. I was wondering if I'd ever see your car around again. You definately need to stay in the loop here and come out for some meets. I'm sure there'd be a few of us guys who'd like to have a closer peek at a RHD Teg.

QuasarCav
03-04-2007, 12:37 PM
Originally posted by frozenrice
Cool man. I was wondering if I'd ever see your car around again. You definately need to stay in the loop here and come out for some meets. I'm sure there'd be a few of us guys who'd like to have a closer peek at a RHD Teg.


That doesn't sound very JDM at all.

jdmXSI
03-04-2007, 02:40 PM
Ya ill definatley come out to some meets this spring!

freakin
03-04-2007, 06:45 PM
Originally posted by QuasarCav



That doesn't sound very JDM at all.

Yeah, it needs to have it's lights painted amber and red, roll on 15's and have the badging from the wrong car for that. Oh and a $1,500 exhaust system. Almost forgot about that one. :thumbsup:

So Lewis, when do I get my O2 sensor wrench back?

QuasarCav
03-04-2007, 07:04 PM
Right now!

PM me your number.

frozenrice
03-04-2007, 08:25 PM
Originally posted by freakin
Yeah, it needs to have it's lights painted amber and red, roll on 15's and have the badging from the wrong car for that. Oh and a $1,500 exhaust system. Almost forgot about that one. :thumbsup:


:rofl: haha, I remember that.
FYI jdmXSI, they're joking about an incident of a guy trying to pawn off a regular Teg as JDM in the marketplace. In your case, you are the envy of those who appreciate genuine JDM Integras. :thumbsup:

jdmXSI
03-04-2007, 11:46 PM
Somebody tried to pawn off a USDM as a JDM?:dunno: Why would some one do that?

QuasarCav
03-05-2007, 09:41 AM
Originally posted by QuasarCav
Right now!

PM me your number.


I had her all polished up and ready to go last night, you will now have to wait another 10 months.

jdmXSI
03-05-2007, 12:06 PM
I feel bad, can i pick it up this week?

alpineguy
03-06-2007, 02:32 PM
I know the guy that tried to say his car was jdm. He didnt have anything on his car to even come close to saying that he had jdm parts on the car.


Oh and does anybody know how busy legendboy is? I need a log style turbo mainfold for my car.

QuasarCav
03-06-2007, 02:34 PM
Originally posted by alpineguy
I know the guy that tried to say his car was jdm. He didnt have anything on his car to even come close to saying that he had jdm parts on the car.


Oh and does anybody know how busy legendboy is? I need a log style turbo mainfold for my car.


As opposed to your rice fest.

6 hours until VTEC.

alpineguy
03-06-2007, 02:36 PM
rice fest? I dont have anything on my car that is rice.

stevieo
03-06-2007, 02:36 PM
jdm g2 tegs ftl

QuasarCav
03-06-2007, 03:12 PM
Originally posted by alpineguy
rice fest? I dont have anything on my car that is rice.


Your mom told me to post it.

Do you not have altezzas and an aluminum spoiler?

Colin = Rice

alpineguy
03-06-2007, 03:49 PM
I do not have Altezza's and I do not have any kind of spoiler on my car. And my car has lest rust than yours does.

QuasarCav
03-06-2007, 03:58 PM
We all know that rust = rice.

At least my car is not seafoam green.

freakin
03-06-2007, 07:53 PM
Originally posted by QuasarCav

I had her all polished up and ready to go last night, you will now have to wait another 10 months.

SHITBALLS!! I missed the window again. No maintenance for me then!

I've PM'd you my number.

B17a
03-06-2007, 09:01 PM
Originally posted by QuasarCav



As opposed to your rice fest.

6 hours until VTEC.

Enjoy the new toy!!:D :thumbsup:

alpineguy
03-06-2007, 11:59 PM
Originally posted by QuasarCav
We all know that rust = rice.

At least my car is not seafoam green.

The color is Jasper Green and i hate it.

QuasarCav
03-07-2007, 09:07 AM
Originally posted by alpineguy


The color is Jasper Green and i hate it.


Now is the time to upgrade! How about a 93 Isle green LS?

She is here folks, and what a beast it is. Everything is in perfect condition and the car loves to rev. The complete lack or torque takes some getting used to but the transmission is a gem and so is 100 in 2nd gear.

We really need a meet of some sorts now, I have some parts from the LS that I can hand out. I know Mike needs a shift knob.

meotch
03-07-2007, 01:35 PM
well I never thought the time would come.. I am heading back to school in the fall and I have to part with the teg.. since I cant put it in the market place yet.... the DA posse has first crack if anyones interested

quick lowdown..

92' DA LS, 180,000km
2000 B16A2 103,000 km

pearl white, 5 spd, header, exhaust, intake, chipped P28, short shift, system (mp3, cap, amp, sub, in-floor box), 18" rims & winter rims and tires, no rust, adj. coil overs, Neuspeed front strut bar, Partial Turbo kit : 57 trim T3 .48/.70 a/r, Log manifold, 450cc DSM injectors, charge pipes, huge intercooler *needs downpipe & tuning to complete*

asking $7200 OBO
looking to sell as a whole, not looking to part out yet....

mitch

pm for details and pics.

meotch
03-08-2007, 11:30 AM
Here are a few more pics of the car..

cheers,


mitch


http://www.we-todd-did-racing.com/view/full/462377_974f6

http://www.we-todd-did-racing.com/view/full/290647_bd606

QuasarCav
03-08-2007, 11:34 AM
Hey Mitch,

Let me know if you want to part out a few things.

I'll take the header.

alpineguy
03-08-2007, 06:35 PM
Hey does anyone want to get a quick meet together on sunday?

jdmXSI
03-08-2007, 07:15 PM
I might be in!

frozenrice
03-09-2007, 10:38 PM
Name a place and time. I think I might be able to come out.

frozenrice
03-10-2007, 02:19 PM
Anybody looking for parts? I'm going to look at a sedan today.

alpineguy
03-10-2007, 04:07 PM
power mirrors

frozenrice
03-10-2007, 08:05 PM
^ dang, I thought you would have found a set by now. I don't know if sedan ones would fit on a coupe?
I went and had a look at it today and man am I ever tempted. For the price I can't loose, but the problem being is I don't have the room to store it. I've already got a rusty truck sitting in front of the house.......

SNAATCH
03-11-2007, 03:05 PM
QuasarCav
are you loving the vtec
and did you put the sir rims on yet.
Its sebastian from the headache09 account.
im affraid my old alias was stolen and im onto this one now.
Seriously gota have a g2 integra meet super soon.
im thinking mid april.
anyone wanna make this official?

danlowteg
03-11-2007, 07:47 PM
anyone meet up today?

freakin
03-12-2007, 08:27 AM
Originally posted by frozenrice
^ dang, I thought you would have found a set by now. I don't know if sedan ones would fit on a coupe?
I went and had a look at it today and man am I ever tempted. For the price I can't loose, but the problem being is I don't have the room to store it. I've already got a rusty truck sitting in front of the house.......

I think you have to swap the door mounted portion to put mix sedan and 2 door mirrors. I was looking for folding mirrors a while ago and remember being told that.


Originally posted by danlowteg
anyone meet up today?

Lewis and I did. I got to see that clean GSR that he picked up. Pretty nice car! Made me want to get my car all finished up ASAP. mmmmm VTEC. :burnout:

frozenrice
03-12-2007, 08:22 PM
^ thanks for letting us know!

Matt, would you consider giving me a hand with the truck's head gasket? :angel: I'm thinking someone familiar with a 22r might be helpful to have around.

SNAATCH
03-12-2007, 11:01 PM
anyone know who can tune a ecu for ls vtec with low compression pistons. prior to boost.

freakin
03-13-2007, 01:57 AM
Originally posted by frozenrice
^ thanks for letting us know!

Matt, would you consider giving me a hand with the truck's head gasket? :angel: I'm thinking someone familiar with a 22r might be helpful to have around.

It's a 22RE, isn't it? Not that it makes much difference (EFI vs. carb). I'd be glad to help out, but I don't think I'll have time in the next month though. I'm too busy with school, praticums and work at the moment to touch cars. That's why the CRX is a year behind schedule.



Originally posted by SNAATCH
anyone know who can tune a ecu for ls vtec with low compression pistons. prior to boost.

Rage2, or try RichardChan....he might be doing it now.

danlowteg
03-13-2007, 08:32 PM
Originally posted by freakin


I think you have to swap the door mounted portion to put mix sedan and 2 door mirrors. I was looking for folding mirrors a while ago and remember being told that.



Lewis and I did. I got to see that clean GSR that he picked up. Pretty nice car! Made me want to get my car all finished up ASAP. mmmmm VTEC. :burnout:

you need some help matt? you need to get that thing working so we can be "slammed honda bros"

freakin
03-14-2007, 10:37 AM
I would love some help...and you knot that car is going to be as slammed at that ITR 4-1 header is going to let me be.....hopefully it doesn't suffer the fate of my last one. The oem unit seems a lot more robust than the DC knock-off that I had on the Teg. I cried a little inside when I hit that protruding manhole (no not that kind, get your mind out of the gutter):

http://www.members.shaw.ca/matteakin/acura/header_dented.JPG

I also figured out why my front suspension wasn't moving or going down that low. Looks like I had my control arms sticking out with too much positive camber. They were litterally stuck on the wheelwells. I'll fix that this weekend and then wait for my wiring harness to come back from Darren. Does anyone have the washer, bolt and pin that mount the shift linkage to the tranny? I've lost my at some point in the motor swap. Or the bolts that hold the rear tranny mount to the tranny?

frozenrice
03-14-2007, 06:33 PM
Originally posted by freakin
I cried a little inside when I hit that protruding manhole (no not that kind, get your mind out of the gutter):

That would also be known as a pink sock......



Originally posted by freakin
Does anyone have the washer, bolt and pin that mount the shift linkage to the tranny? I've lost my at some point in the motor swap. Or the bolts that hold the rear tranny mount to the tranny?

I might have that stuff. I'll go and check and let you know.

frozenrice
03-14-2007, 08:14 PM
^ I found some stuff for the shift linkage. The washer(s), bolt, pin and the collar too. All extra stuff so it's yours. Negative on the engine mount bolts.

freakin
03-15-2007, 03:38 AM
Perfect, I'll have to figure out when/where to meet up with you. I'm moving in to my new place over the weekend, but I'm keeping the car at the old place until it's done.

QuasarCav
03-15-2007, 09:08 AM
Originally posted by freakin
Perfect, I'll have to figure out when/where to meet up with you. I'm moving in to my new place over the weekend, but I'm keeping the car at the old place until it's done.


Matt is leaving the nest??

I have some parts to give to Mike, would you guys like to meet somewhere down south on Sat afternoon?

frozenrice
03-15-2007, 09:41 PM
I'd love to meet up but Saturday is pretty much out for me, unless we meet in the evening. How about we meet up for some pool at Stix?

alpineguy
03-15-2007, 11:07 PM
i think that this will be my next mod. 98 itr headlights..

QuasarCav
03-16-2007, 08:32 AM
Originally posted by frozenrice
I'd love to meet up but Saturday is pretty much out for me, unless we meet in the evening. How about we meet up for some pool at Stix?


Lewis and public places do not get along!

jdmXSI
03-16-2007, 11:36 AM
Those ITR lights look sweet!:love:

b16Ateg
03-16-2007, 07:08 PM
wow i'm surprized this thread is still going i haven't been on beyond for a few years and i'm shocked.. dave give me a shout sometime we have to hook up and do something ...

frozenrice
03-16-2007, 07:20 PM
wow man.......back from the dead. Were have you been? You might not find Dave here. He's seems to be AWOL from this thread.

b16Ateg
03-16-2007, 07:23 PM
i'm still alive dont you worry.. and still sporting the teg.. might get some make overs soon.. who knows i parted out alot on it so ya.. g.f just drives it now adays ya.. i'm to lazy havne't seen dave on msn in a bit so ya.. wondering were he is and if he is alive..lol

frozenrice
03-16-2007, 07:30 PM
he's alive, he just doesn't post here anymore or beyond for that matter as far as I know. He might have changed accounts too but wouldn't know what his new one is. I was fortunate enough to inherit the carbon fibre hood from Dave, speaking of which I still need to pay him back for hooking me up with it. I might have seen your Teg down south a few times, but it was a girl driving.

b16Ateg
03-16-2007, 07:33 PM
is it the same one he got from the acident or no and it was probally the g.f driving it with the kid.. you can still know its mine cos of the rims and lights cos i know i sold him mine and then it got fucked in that accident and then got a new one with some lighys

frozenrice
03-16-2007, 07:35 PM
that would be the hood. at certain angles you can still see the outlines from the vinyl lettering.

QuasarCav
03-16-2007, 09:02 PM
I think Dave has become just 'Frosty'.

I'll be doing the brakes tomorrow thanks to Mat providing the rotors. I hope everything goes smoothly for the first modification on the new car.

alpineguy
03-19-2007, 11:30 PM
So Lewis, I heard that you want to open up a shop? I would deffenetly do that with you.

alpineguy
03-19-2007, 11:32 PM
Originally posted by SNAATCH

Seriously gota have a g2 integra meet super soon.
im thinking mid april.
anyone wanna make this official?


I am up for this my car should be out of the shop by then.

jdmXSI
03-19-2007, 11:35 PM
Originally posted by alpineguy



I am up for this my car should be out of the shop by then.

I think i should be ready too!

gen2teggy
03-19-2007, 11:40 PM
can i come?

frozenrice
03-20-2007, 06:31 AM
^only if you can get your 240 started. bring your hockey stick.

alpineguy
03-20-2007, 09:00 PM
so who wants to post a date?

gen2teggy
03-20-2007, 09:09 PM
lol i got it fixed!
working at nissan has it benefits