PDA

View Full Version : The Official 2nd Gen Integra Thread



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 [53] 54 55 56 57 58 59 60 61 62 63 64 65

danlowteg
03-21-2007, 06:51 PM
ill post it tonight i guess anyone good for the 15th of sunday and a long drive to brag creek or banff

danlowteg
03-21-2007, 07:46 PM
http://forums.beyond.ca/st/169819/official-2007-g2-integra-spring-cruise/

The plan is ready. make sure to tell me that you are going

da9integ
03-22-2007, 06:30 PM
any of you know where i could find exterior window trim for a 92 teg?

SNAATCH
03-22-2007, 09:49 PM
Anyone have a rear tranny mount so i can come to the meet :burnout:

SNAATCH
03-22-2007, 09:49 PM
Anyone have a rear tranny mount so i can come to the meet :burnout:

frozenrice
03-22-2007, 11:38 PM
Both the exterior window trims and the rear engine mounts would be hard to come across. You pretty much need to find a wrecker that has one. You also might want to try a guy that goes by na power on here. He might have some of that stuff you're looking for.

freakin
03-23-2007, 12:50 AM
I have the window trim for the left side of a sedan....you can have it if you need it. Rear tranny mount is going to be hard to find because everyone doing an EF B-series swap needs it as well. Luckily I wrecked a couple of tegs recently and kept some parts for myself. Most of it is all gone now.

da9integ
03-23-2007, 02:15 PM
sorry need window trim for a 90-93. just the left side. if anyone could help. thanks

freakin
03-23-2007, 07:14 PM
So that's a 90-93 2-door that you need then? Sedan's were made from 90-93 as well....which is what the part I have would be used on.

Mike, need some window trim? I know mine ripped at the top of the front driver's side and made a bit of a mess when I'd shut the window while driving.

da9integ
03-23-2007, 08:25 PM
yes a 2 door 90-93 teg trim. sorry

SNAATCH
03-23-2007, 10:44 PM
anyone have a ls dizzy? obd1
i got money and a b16 dizzy and obd2 ls dizzy and some other stuff. need one asap

QuasarCav
03-24-2007, 09:50 AM
I'm a lucky boy! My first 1000km of hard VTEC driving and the oil level remains the same as the day I bought it. The only problem is that I'm averaging about 350kms a tank of in city driving and 5K cruising on the highway doesn't do much for fuel economy.

When I drive the old LS it feels like it has the torque of a V8.

B17a
03-24-2007, 10:35 AM
Haha Lewis, I have the same problem, feeding the twin turbos with premium fuel nonetheless is become an expensive addiction!:D

freakin
03-24-2007, 03:26 PM
Originally posted by SNAATCH
anyone have a ls dizzy? obd1
i got money and a b16 dizzy and obd2 ls dizzy and some other stuff. need one asap

What's the problem with the LS dizzy? Most of the parts are interchangable. I've stolen ignitors from LS dizzy's for VTEC units, and vice versa.

danlowteg
03-25-2007, 07:48 PM
Originally posted by QuasarCav
I'm a lucky boy! My first 1000km of hard VTEC driving and the oil level remains the same as the day I bought it. The only problem is that I'm averaging about 350kms a tank of in city driving and 5K cruising on the highway doesn't do much for fuel economy.

When I drive the old LS it feels like it has the torque of a V8.

Are you coming to the meet lewis?


Originally posted by B17a
Haha Lewis, I have the same problem, feeding the twin turbos with premium fuel nonetheless is become an expensive addiction!:D

you as well mr b17a


Originally posted by freakin


What's the problem with the LS dizzy? Most of the parts are interchangable. I've stolen ignitors from LS dizzy's for VTEC units, and vice versa.

yes you can......matt you coming to the meet? bring steve too

freakin
03-26-2007, 08:43 AM
Yah, I might actually make that this time. If I'm not done by then, I'll go with Steve. I think he should have his new windsheild by then...otherwise no Soarer either.

danlowteg
03-26-2007, 09:34 AM
Originally posted by freakin
Yah, I might actually make that this time. If I'm not done by then, I'll go with Steve. I think he should have his new windsheild by then...otherwise no Soarer either.

good ill add you. also pick up your cell i wanted to come help you on sunday

AutodreamMarvin
03-27-2007, 12:12 PM
SOMEBODY FIND ME A 92-93 LS OR GS!!!!

that is all......

QuasarCav
03-27-2007, 12:38 PM
Have you looked in the marketplace? My Sig?

frozenrice
03-27-2007, 09:23 PM
wow, a Nissan guy looking for a Teg? What do you plan on doing with it?

freakin
03-27-2007, 10:48 PM
Originally posted by danlowteg


good ill add you. also pick up your cell i wanted to come help you on sunday

You should leave messages when you call. My caller ID hasn't really worked properly since I changed phones....I get the number but it doesn't show me the name even when it's in my phonebook. If I don't recongnize it, I usually don't call it back.

I would've loved a hand on the car. It's damn close now. I'm pretty much just waiting for Darren to finish up my wiring harness so that I can put it back in.....sooooo close

CI_Josh
03-28-2007, 06:34 PM
Hey guys, been a while since I posted but I figured I'd toss this up for you guys first, I got my two stock rear tail lens' just sitting in my garage not doing anything so if you need a pair I got you covered.

They are off my 93 GSR no cracks and no leaks. 60.00 bones for both or 35.00 one.

Once my sister gets back with my camera I can snap a few pics if you want.

-Josh

AutodreamMarvin
03-29-2007, 10:33 AM
Originally posted by QuasarCav
Have you looked in the marketplace? My Sig?

I may call you to look, but really looking for white or black.


Originally posted by frozenrice
wow, a Nissan guy looking for a Teg? What do you plan on doing with it?

I've got a Sol right now. Guy made an offer for it while it was parked in the lot. I may sell. Need something to throw my 5-lug and B18C into. DA has always been my favourite.

Nissan guy? I've been playing around with Honda's for 7 years.

frozenrice
03-29-2007, 11:48 AM
sorry, Autodream = Nissan was my assumption.
Can/does Autodream tune Turboedit on a Hondas? Sorry don't know a lot about you guys cause I thought it was all Nissan.

AutodreamMarvin
03-29-2007, 11:30 PM
Originally posted by frozenrice
sorry, Autodream = Nissan was my assumption.
Can/does Autodream tune Turboedit on a Hondas? Sorry don't know a lot about you guys cause I thought it was all Nissan.

PM'd!

SNAATCH
03-29-2007, 11:46 PM
AHHHH!
i just sold my g2 boys.
finished the b18b swap and soomeone took it 3 days later.
anyone have a 4 door da for sale. ?

frozenrice
03-30-2007, 06:44 AM
There was one for sale in the marketplace a few weeks ago. The guy wanted almost next to nothing for it. I really wanted to buy it, but don't have the space for it. Needed a bit of body work though.

Marv, did you send the pm yet? Didn't get anything.

db1
04-01-2007, 10:44 PM
anyone possibly have an oil pressure switch connector, that connects to the vtec solenoid?? in need of one desperately!!

honda/teg
04-01-2007, 10:49 PM
does anyone know someone that can tune a obd-0 integra turbp pm me me please if u do i am in desperate need

Dim_Sum
04-01-2007, 11:26 PM
dam! snaatch i just sold my 4 door da not to long ago for $2000, is it too late for another DA owner to join? :)

frozenrice
04-01-2007, 11:40 PM
too late for the meet? never.

QuasarCav
04-02-2007, 10:47 AM
I said I would hold off on the mods but It's hard when you find one of these for a good price:
http://i144.photobucket.com/albums/r183/Lewie5/DSCN0604.jpg

RS*R Catback!!

frozenrice
04-02-2007, 06:55 PM
^nice! Love the way the tip looks.

misterrick
04-02-2007, 07:05 PM
since this is the g2 integra thread,

i recently crashed my 90 integra w/ B16a1 swap and desperatly need to sell whats left of the car, due to the fact that i dont have collision coverage. unfortunately i havent been a member here for more than 30 days so i cant post it in the marketplace. i would really like to see this engine/car go to someone who appreciates it. if anyone is intersted in the car or even in helping me in posting/selling it, i have pics of it that i can email anyone or pm me for me number to come and see it. i also have a few odd integra parts laying around (taillights, etc.) which i would gladly give to the purchaser or anyone else who helps.

thanks in advance for anyones help.

frozenrice
04-04-2007, 06:49 PM
misterrick, sorry to hear. I'll keep you in mind if I hear of anything.
Bump for the thread. Come on now guys - page 2?

alpineguy
04-05-2007, 01:51 AM
frozenrice, Are you running your stock rad in ur car when you turbo it? Or are you getting a half rad?

frozenrice
04-05-2007, 06:28 AM
I'm probably going to run a 1/2. Are you looking for a stock one?

alpineguy
04-05-2007, 06:32 PM
No, I am putting a turbo in my car and i am running a full rad. I just wanted to know if you were.

Dim_Sum
04-05-2007, 08:28 PM
hey (frozenrice) new to this g2 teg thread, but if u have a dual core stock integra rad i might be looking for one soon, if u go to half let me know

danlowteg
04-06-2007, 09:39 AM
Looks like there will be rain for sunday, so we might have to keep this meet in calgary. If we do stay in clagary then we can go out for drinks and what such. I will decided on monday

PS: If you have some wicked ideas post them

Genjuro
04-06-2007, 10:20 AM
hey guys.
i still have my USDM G2 headlights if anyone wants them.
40 bucks obo and both are yours.

132nd page :poosie:

alpineguy
04-06-2007, 03:59 PM
Originally posted by Genjuro
hey guys.
i still have my USDM G2 headlights if anyone wants them.
40 bucks obo and both are yours.

132nd page :poosie:

Toss these puppies my way. Mine are all messed up, the adjustments are broken.

Genjuro
04-07-2007, 02:50 AM
Originally posted by alpineguy


Toss these puppies my way. Mine are all messed up, the adjustments are broken.
pm me. take them saturday.

da9integ
04-08-2007, 03:51 PM
i have a set of white gause faces that light up blue or green. if anyone is interested im selling for 80 obo just pm me

danlowteg
04-08-2007, 10:13 PM
meet is soon:thumbsup:

alpineguy
04-09-2007, 02:08 PM
Hey Genjuro, Sry about not getting back to you i was busy all weekend but i will pm you and get together so i can get those headlights.

rey_mysterio
04-10-2007, 07:49 PM
hey does anybody know what windshield wiper motors will work for my db2??

frozenrice
04-10-2007, 08:31 PM
I think the wiper motor is specific to the 2nd gen Integras. I am assuming you are talking about the sedan (DB1)? Same part number for all years and trim levels for 2nd gens. No matching Acura or Honda models come up when searching on the part number. Here are the sites I used for reference :

Acura Parts (http://www.acuraoemparts.com/delray/jsp/home.jsp)
Honda Parts (http://www.hondaautomotiveparts.com/)

I know some of the part numbers are the same between Honda and Acura and usually they cross reference between the two.


There's a meet coming up this Sunday. You need to come out. We need some 4 doors.

rey_mysterio
04-11-2007, 10:06 AM
thx for the useful info. . .ill try to come this sunday where you going?

frozenrice
04-11-2007, 11:44 AM
Here's the link : and you can't just "try" you HAVE TO. lol.

cruise info (http://forums.beyond.ca/st/169819/official-2007-g2-integra-spring-cruise/)

AllGoNoShow
04-11-2007, 05:36 PM
Hey guys, couple questions.

Landlrod left me his old 91 teg to fix up, I'm going to be giving it to a roommate so he has a car but its got a couple issues.

1. When you release the clutch (engaged position) there is some sort of whining/griding noise, when it is disengaged (pedal depressed) the noise goes away.

Is this release bearing or another problem?

2. How do you check CEL codes or do they need to be read? Throwing a CEL as well.



Thats all for now, thanks guys!

frozenrice
04-11-2007, 05:46 PM
Not too sure on the clutch issue. I have an auto (for now).

CEL- This is something I've never done before myself but if I'm not mistaken, you can simply pull back the carpet in the passeger side footwell and remove the metal cover plate. You should see the the ECU now. There should be a light(or window?) somewhere on it and all you need to do is count the flashes and blinks to get your code. Again because of the auto tranny, the gear selection indicator on the dash does the same job as the light on the ECU, so I'm pretty sure - but not 100% on the other method.

QuasarCav
04-11-2007, 05:53 PM
Allgo: I suggest you check out G2ic.com, it will answer all of your questions in depth. I have a copy of the service manual in PDF format if that can be any help.

As for the clutch, does it work normally? Have you tried adjusting the engagement point? How is the fluid level?

AllGoNoShow
04-11-2007, 06:41 PM
Ya she works and drives fine, just the noise.

Sorry for my ignorance guys but I'm normally domestic/BMW lover. How the fuck do you check the level on a manual honda? lol.

Quasar a copy of that manual would be awsome if you could man, I don't think I have any manuals for this thing so anything would be sweet.

[email protected] is my email.

Thanks alot guys!

danlowteg
04-11-2007, 07:32 PM
well i won't be coming sunday unless i have a obd0 dizzy mine just blew up

rey_mysterio
04-11-2007, 08:09 PM
tell you what if i can be bcak before my soccer game on sunday ill come:thumbsup:

Dim_Sum
04-11-2007, 08:57 PM
Hey (danlowteg) I Have a OBD-0 Distrubuter Non Vtec

frozenrice
04-11-2007, 08:57 PM
Remove the filler plug. Stick your finger in the hole and you should have fluid right up to the bottom of the filler hole.

http://img.photobucket.com/albums/v219/frozenrice/trannyfluid.jpg

freakin
04-11-2007, 11:50 PM
Originally posted by AllGoNoShow
Hey guys, couple questions.

Landlrod left me his old 91 teg to fix up, I'm going to be giving it to a roommate so he has a car but its got a couple issues.

1. When you release the clutch (engaged position) there is some sort of whining/griding noise, when it is disengaged (pedal depressed) the noise goes away.

Is this release bearing or another problem?

2. How do you check CEL codes or do they need to be read? Throwing a CEL as well.



Thats all for now, thanks guys!

Your noise is your release bearing if it's going away as soon as you put pressure on your clutch pedal....your choices are to live with it if the clutch is working properly or change it out. Adjusting the cable won't do anything for the noise. The fluid level would be making noise all of the time if that was the case.

The CEL on a OBD-0 honda (which your 91 will be unless it's been upgraded) is an LED on the top of the ECU...I'm not sure how to make it flash though. On the OBD-1 cars you have to put a jumper in to a connecter above the ECU, then turn the key to the on position without starting it and count the flashes of the CEL light to get the code. I'd consult honda-tech on that one. I'm sure it's been covered there....pretty common question.

AllGoNoShow
04-12-2007, 05:06 AM
Sweet thanks

I can't tell if it makes the noise all the time while driivng too, theres a rusted out (i think) fart can on the thing and holly hell it makes alot of noise when moving. I'll see if I get less sick tomorrow and check the fluid level and go from there.

If I leave a damaged/worn release bearing in, is it going to cost more next time I change the clutch from other damage?

freakin
04-12-2007, 08:28 AM
A clutch kit will contain a pressure plate, disc, centering tool and release bearing. It gets replaced with everything, so it's not going to cost anything extra. But if you're going in just to replace the bearing, then you might as well replace the clutch because of the hassle to get in there.

Typical kit:
http://www.discounthonparts.com/includes/images/Honda_Parts/Hon_ClutchKit.jpg

freakin
04-12-2007, 08:39 AM
Originally posted by danlowteg
well i won't be coming sunday unless i have a obd0 dizzy mine just blew up

I've got that OBD-0 B16 one sitting in my garage that you can borrow. You know that!! I just need it back once you get yours sorted out. I'll need it for my car eventually....but for now you're welcome to use it.

I might not make the cruise due to some homework obligations....but I might be convinced otherwise.....depending on how much progress I make this week.

QuasarCav
04-12-2007, 04:29 PM
I'll be ordering some Energy Suspension crap from Mopac tomorrow. Does anyone else need some things? I know Mopac is a PITA to get to sometimes so it might be easier for me to just grab a bunch of items.

I'll be getting the shift stabilizer bushings, does anyone else have a sloppy shifter?

frozenrice
04-12-2007, 08:26 PM
Lewis. Are you coming on Sunday? Can you bring that shift knob if you do? Matt I have the shift linkage bolts too for you so you have to come out.

Sidenote : JDMxsi, was that you on Barlow this evening?

alpineguy
04-13-2007, 02:35 AM
hey lewis i have a sloppy shifter, how much for it? if it is cheap i want one.

frozenrice
04-13-2007, 06:50 AM
I think the ES shifter bushing kit is only like $15.00. Doesn't look like it'd be too hard to install either. It was pretty easy when I did it, but that's because the whole shift linkage hasn't been installed yet.

QuasarCav
04-13-2007, 08:29 AM
I will probably come to Chinook and take off after that. I'll bring an assortment of shift knobs for you. and if XSI is there I'll bring the spoiler as well.

I'm replacing the cat-back so while I'm down there I'll do the shifter, Mike is about right on the price. Let me know if you would like to order it and I can just give it to Elaine.

alpineguy
04-13-2007, 12:23 PM
yes yes yes

alpineguy
04-14-2007, 03:54 PM
What page 2? I leave for a hockey tourny in banff for a night and we go to page 2?

da9integ
04-14-2007, 05:46 PM
hey i just have a question if anyone can help me out. okay so for a while now my clutch has been feeling really tight and at times will feel looser and more normal but then at other times feels tight again. does anyone know what the cause could be or any possible ways of fixing this? thanks

danlowteg
04-14-2007, 09:46 PM
so guys, meet tomorow make sure your there. We might be heading to b-p's to watch the rest of the game.

alpineguy
04-15-2007, 04:54 PM
good meet guys.

jdmXSI
04-15-2007, 04:55 PM
The weather definatly held out for us too!:D

danlowteg
04-15-2007, 05:38 PM
lewis did you take any pictures i forgot my cam? did anybody?

PS: great meet

CI_Josh
04-15-2007, 10:34 PM
Yeah I snapped a couple of high res pics from BPs and Bowness, once I can get to my parents place and grab my camera cable I'll get them up.

danlowteg
04-17-2007, 04:58 PM
put them up

danlowteg
04-19-2007, 04:15 PM
no page 2 wtf people

CI_Josh
04-20-2007, 06:06 AM
Here they are, sorry for the delay, took me a while to get to the parents place.

http://i145.photobucket.com/albums/r201/jmulatz/DSCN0604.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0605.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0606.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0607.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0608.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0609.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0610.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0611.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0612.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0613.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0614.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0615.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0616.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0617.jpg
http://i145.photobucket.com/albums/r201/jmulatz/DSCN0618.jpg

Next time hopefully we can get more people out! haha.






P.S. - I snuck that pic of that AWFUL looking Chev. in there just for fun. Poor guy... how does he sleep at night after doing that to his ride? HAHA.

Frosty
04-20-2007, 09:53 PM
That Cavalier is hott :hitit: :D

It was a good meet, too bad we didn't get more people out.

Also, if anyone wants to buy my car for cheap, let me know. I have finally decided to abandon all rational thought and go to the dark side...

CI_Josh
04-21-2007, 10:43 AM
hahaha got a hard on for the chev? thats not good at all!

If you don't mind my asking what exactly is the dark side? also how much are you selling your ride for?

Frosty
04-21-2007, 03:15 PM
J/J about the Cavalier, I am not a fan of kits on most cars. I used to own one before I realized most domestic cars are best left to commerical leases, rental cars, and grandparents :angel:

The dark side looks like this ;)

http://i2.photobucket.com/albums/y38/frostyDA9/STI.jpg

Someone has made an offer on my teg and I have made a counter, we'll see if it works out or if it's still available.
:thumbsup:

stevieo
04-21-2007, 06:43 PM
damn dave, you selling your car too?
g2's are going outtie!

QuasarCav
04-21-2007, 10:05 PM
I'm driving the GS-R until it's reached 400,000kms or turned 20 years old. Whatever comes first.

Dim_Sum
04-21-2007, 10:09 PM
Anyone Need A C's Short Throw Shifter?

frozenrice
04-23-2007, 11:42 PM
^Thanks for the offer.
C'mon guys, page 2?!!? Josh, thanks for the pictures, they turned out nice. Too bad that rear door of mine stands out so bad.

frozenrice
04-23-2007, 11:48 PM
Originally posted by Frosty
J/J about the Cavalier, I am not a fan of kits on most cars. I used to own one before I realized most domestic cars are best left to commerical leases, rental cars, and grandparents :angel:

The dark side looks like this ;)

http://i2.photobucket.com/albums/y38/frostyDA9/STI.jpg

Someone has made an offer on my teg and I have made a counter, we'll see if it works out or if it's still available.
:thumbsup:

Shit, that's a huge muffler on that thing - not to mention the wing.

honda/teg
04-24-2007, 12:38 AM
i am calling for a integra g2 90-93 meet on may 6 , sunday at the upper chinook parkade at noon , after we meet up we could cruise down to cochrane or bragg creek
newer integras are welcome too pm me and let me know who would be up for this

Frosty
04-24-2007, 03:30 PM
Originally posted by stevieo
damn dave, you selling your car too?
g2's are going outtie!

I guess all good things have to come to an end. I had the G2 for around 5 years, that says something about them doesn't it :) I'll miss the meets.



Originally posted by frozenrice


Shit, that's a huge muffler on that thing - not to mention the wing.

I used to think the STI was factory riced, but it grew on me. Now when I see one cruising down the road it's pure sexy to me :love: If anyone knows anybody selling an '05 please let me know :thumbsup:

QuasarCav
04-24-2007, 03:37 PM
Does anyone have a 32mm socket? I've got to replace my rear bearing soon.

CI_Josh
04-24-2007, 04:55 PM
Got a bit of a problem...

Noticed today while I was siting idle in traffic, that my temp gauge was almost at RED :eek: But as I started moving it moved back down to regular operating temp. this happened last summer as well and it turned outI had a leak in my rad, so it got replaced and also so did my water pump and timing belt. So I'm really hoping that there might be something else small that I am overlooking here, and that its not a problem with any of the new parts I just replaced. Anyone got any other ideas? Advice? Thanks.

QuasarCav
04-24-2007, 05:22 PM
Originally posted by CI_Josh
Got a bit of a problem...

Noticed today while I was siting idle in traffic, that my temp gauge was almost at RED :eek: But as I started moving it moved back down to regular operating temp. this happened last summer as well and it turned outI had a leak in my rad, so it got replaced and also so did my water pump and timing belt. So I'm really hoping that there might be something else small that I am overlooking here, and that its not a problem with any of the new parts I just replaced. Anyone got any other ideas? Advice? Thanks.


Have you dont any work to the cooling system lately? How is the rad cap? Is there enough coolant in the overflow bottle?

frozenrice
04-24-2007, 05:47 PM
Lewis, I have a 32mm if you need to use it. Let me know and we can hookup. You can borrow the impact again too.

Josh, make sure you're not loosing coolant even if you don't see any leaks. Not trying to scare you, but make sure you're not burning coolant. It's not likely but I'd check to make sure. Low to no coolant is a disaster waiting to happen. It could also be just your thermostat which I'd say is more than likely than burning coolant.

honda/teg, I'll see if I can make it out. May is going to be crazy for me so I'll have to play it by ear. I'm a family guy, not single like most of you so I have to see how things work out.

freakin
04-24-2007, 07:08 PM
Originally posted by QuasarCav
Does anyone have a 32mm socket? I've got to replace my rear bearing soon.

I have one if you're not grabing Mike's. I can loan you a breaker bar as well...You're going to need it. It'll only cost you the small sum of returning my O2 sensor socket.



Originally posted by CI_Josh
Got a bit of a problem...

Noticed today while I was siting idle in traffic, that my temp gauge was almost at RED :eek: But as I started moving it moved back down to regular operating temp. this happened last summer as well and it turned outI had a leak in my rad, so it got replaced and also so did my water pump and timing belt. So I'm really hoping that there might be something else small that I am overlooking here, and that its not a problem with any of the new parts I just replaced. Anyone got any other ideas? Advice? Thanks.

Definately sounds like low coolant. Pull the cap once it's cooled down and check the level. Top it up as well as the resevoir, then look for leaks. My B18A was doing the same before I found a slow leak in my rad. I never saw a puddle or any other sign....just the temp fluctuations....heating really quickly, cooling off when moving, the fan comming on all of the time, etc.

CI_Josh
04-24-2007, 11:49 PM
Thanks guys, I think I should be good for the morning to toss in a jug of water or something to top it up, its not getting near freezing now at night, I'll get my friends (guy that was with me on the cruise) to grab me some coolant and drop it off at work since he works at Auto Value and I'll toss it in before going home.

I appreciate all the responses in such a timely fashion! :thumbsup:

God bless new jobs, I can actually AFFORD to pay for repairs now. :rofl:

Oh yeah, does anyone else work in foothills industrial park? If so we should hook up for G2 lunches!:D

CI_Josh
04-24-2007, 11:50 PM
Oh yeah does anyone know the post count for the gears for forum rankings?

jdmXSI
04-25-2007, 12:18 AM
I feel like a nerd for even knowing where this was! Anyways here she is:

Newbie (Minimum Posts: 0)
Neutral (Minimum Posts: 100)
First Gear (Minimum Posts: 350)
Second Gear (Minimum Posts: 750)
Third Gear (Minimum Posts: 1000)
Fourth Gear (Minimum Posts: 2000)
Fifth Gear (Minimum Posts: 3000)
Sixth Gear (Minimum Posts: 4000)
Sixth Gear Redline (Minimum Posts: 5000)

unless its been changed?:dunno:

alpineguy
04-25-2007, 02:40 AM
wow that is good to know

Does anyone have any 90-91 bumper lenses lying around?

frozenrice
04-25-2007, 06:45 AM
Originally posted by jdmXSI
I feel like a nerd for even knowing where this was! Anyways here she is:

Newbie (Minimum Posts: 0)
Neutral (Minimum Posts: 100)
First Gear (Minimum Posts: 350)
Second Gear (Minimum Posts: 750)
Third Gear (Minimum Posts: 1000)
Fourth Gear (Minimum Posts: 2000)
Fifth Gear (Minimum Posts: 3000)
Sixth Gear (Minimum Posts: 4000)
Sixth Gear Redline (Minimum Posts: 5000)

unless its been changed?:dunno:

I'm a bigger geek for knowing the current count:

Newbie (Minimum Posts: 0)
Neutral (Minimum Posts: 100)
First Gear (Minimum Posts: 500)
Second Gear (Minimum Posts: 1500)
Third Gear (Minimum Posts: 3000)
Fourth Gear (Minimum Posts: 5000)
Fifth Gear (Minimum Posts: 7000)
Sixth Gear (Minimum Posts: 9000)
Sixth Gear Redline (Minimum Posts: 10000)

Here is the link to the thread :
http://forums.beyond.ca/st/62278/how-do-i-change-gears-/

frozenrice
04-25-2007, 07:03 AM
Before I forget, go nuts :

http://img.photobucket.com/albums/v219/frozenrice/hondapartyxm7.jpg

http://img.photobucket.com/albums/v219/frozenrice/twin511rimsv3wa2.jpg

QuasarCav
04-25-2007, 08:09 AM
Originally posted by freakin


I have one if you're not grabing Mike's. I can loan you a breaker bar as well...You're going to need it. It'll only cost you the small sum of returning my O2 sensor socket.


Remember when I picked you up at Anderson station and we drove to your house?

I might have to take you up on the offer though.