PDA

View Full Version : The Official 2nd Gen Integra Thread



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [65]

Moonracer
04-04-2011, 12:58 PM
I still have my red gs-r. It's in desperate need of some work but I should be able to get it done this summer. :D

jdmXSI
04-04-2011, 04:05 PM
i think in the past 2 years or so i have put on 2000kms on my DA... Now the clear coat on the roof started to peel. I wonder what a c/f vinyl roof would look like with a c/f hood and hatch?

Moonracer
04-06-2011, 11:24 AM
Would probly look pretty good

streetdreams
05-03-2011, 09:24 AM
does anyone want parts for a g2 i have a bunch of stuff i would rather not put in the land fill. Just come and pick it up and its yours theres a black interior, headlights, tail lights, rear hatch all sorts of stuff just send me a pm.

streetdreams
05-19-2011, 09:04 PM
anyone?

jdmXSI
05-19-2011, 10:50 PM
I may be interested. What kind of lights 1 or 3 peice? Also, what color are the painted parts?

crez
05-19-2011, 11:17 PM
If I were closer or had some time I would come scoop a lot of things out of your teg....I need a black interior. Maybe a few other miscellaneous pieces

streetdreams
05-20-2011, 09:25 AM
the interior is already out in boxes:) i have lots of random shit i just need gone

frozenrice
05-20-2011, 09:43 AM
Not that I need more stuff (I feel like I'm hoarding lots of stuff as it is), do you have a stock axel back muffler or a 92-93 front bumper?

jaylo
05-24-2011, 10:51 AM
Originally posted by frozenrice
Not that I need more stuff (I feel like I'm hoarding lots of stuff as it is), do you have a stock axel back muffler or a 92-93 front bumper?

I have an axle back stock muffler, though a new flange will need to be welded on, otherwise the muffler is in good shape

Jay

jaylo
05-24-2011, 10:53 AM
Anyone want to help me on installing lower ball joints? I found some brand new ones I bought a couple of years ago and I might as well put it into good use.

The ones on my car are fine, but it would not hurt to install new ones.

Will pay cash or beer :D

Should be an easy job, just don't have all the tools and have a bad back at the moment

Moonracer
05-24-2011, 11:21 AM
Originally posted by jaylo

Should be an easy job, just don't have all the tools and have a bad back at the moment

Sounds like me these days lol

gogreen
05-31-2011, 11:11 AM
Originally posted by jaylo
Anyone want to help me on installing lower ball joints? I found some brand new ones I bought a couple of years ago and I might as well put it into good use.

The ones on my car are fine, but it would not hurt to install new ones.

Will pay cash or beer :D

Should be an easy job, just don't have all the tools and have a bad back at the moment

I'm in the middle of doing this right now, along with tie rod ends, cv boots on the passenger side, and poly bushings. So unfortunately my free time is extremely limited. :(

I might be interested in the stock axleback if frozenrice declines, though. My burned-out stock muffler is beginning to sound a wee bit obnoxious!

streetdreams: I'll be sending you a pm shortly.

jaylo
05-31-2011, 02:02 PM
I just checked my parts and I DO have 2 mufflers. One requires a pipe from the B-pipe to the back of the muffler, and the other one requires a flange welded to mate with the B-Pipe


Originally posted by gogreen


I'm in the middle of doing this right now, along with tie rod ends, cv boots on the passenger side, and poly bushings. So unfortunately my free time is extremely limited. :(

I might be interested in the stock axleback if frozenrice declines, though. My burned-out stock muffler is beginning to sound a wee bit obnoxious!

streetdreams: I'll be sending you a pm shortly.

gogreen
06-01-2011, 07:45 AM
Great, pm sent!

jaylo
06-01-2011, 11:56 AM
I just opened all my DA parts and found these items

1. complete B18A1 OBD0 distributor (I have two)
2. complete B18A1 OBD1 distributor
3. fully OEM rebuilt B18A1 longblock (PM stevescivic, he built this one)
4. A1 B18A1 cable transmission
5. Y1 JDM B16A1 CRX SIR cable transmission (no LSD)
6. Skunk2 PRO intake manifold non-vtec
7. 92-93 Front, Rear, and fenders (Black)
8. 92-93 OEM front lip
9. 92-93 OEM Front bumper metal brackets

Anyone that wants these items, PM me and make me an offer.

frozenrice
10-22-2011, 02:29 PM
Bump for an old, dead thread.

To those who've been around since the beginning, I finally finished what I said I was going to do. Tis done finally.....

http://img.photobucket.com/albums/v219/frozenrice/a93f2f7a.jpg

sevewone
10-23-2011, 12:55 AM
needs to be about 8-10 inches lower guy

frozenrice
10-23-2011, 09:11 AM
lol That's been fixed. While the car was up on jack stands, I replaced the bump stop and dust cover on that corner. Turns out the bump stop was too tall. I took it apart yesterday and cut an 1 off. It's sitting better now.

I took it for a test run yesterday and ended up blowing an oil line.

http://img.photobucket.com/albums/v219/frozenrice/e7b12ab3.jpg
http://img.photobucket.com/albums/v219/frozenrice/ed39508a.jpg

streetdreams
10-24-2011, 07:51 AM
Glad someone started this thread again, if any one wants a bunch of G2 parts for free send me a pm i need it gone this week. I have a full interior, tail lights, corners, a hatch with glass so much little stuff come grab it all.

Moonracer
10-24-2011, 08:29 AM
Nice mikey, glad you finished it.

My car has been taking a beating and is in rough shape right now. Gotta scrape together some money to get the front end fixed and still need a new starter.

jaylo
10-24-2011, 04:48 PM
If anyone needs these

7. 92-93 Front, Rear, and fenders (Black)
8. 92-93 OEM front lip
9. 92-93 OEM Front bumper metal brackets

Let me know because I want them gone

Moonracer
10-25-2011, 08:31 AM
^^^don't worry I saw that lol I probly won't be able to get it fixed til the spring if i'm lucky.

Moonracer
01-27-2012, 01:23 PM
Originally posted by jaylo
If anyone needs these

7. 92-93 Front, Rear, and fenders (Black)
8. 92-93 OEM front lip
9. 92-93 OEM Front bumper metal brackets

Let me know because I want them gone

Hey man, do you still have this stuff?

I finally moved into a house with a garage :clap: So now I can do some work on the teg. Money is kinda tight right now but I'll be needing a 92'/93 front bumper with support frame/bracket and headlights. I have a few other problems to fix and i'm hoping to have it looking and running nice for the summer.

frozenrice
09-08-2017, 11:47 PM
Bump!!!!! This week was meant to be. Got the rice cooker running, go to Banff for some weekend camping and I run into Moonracer of all people....

jaylo
09-10-2017, 03:19 PM
Bump!!!!! This week was meant to be. Got the rice cooker running, go to Banff for some weekend camping and I run into Moonracer of all people....

Is your DA still alive? I'm not sure where mine went after I sold back in 2011.

frozenrice
09-10-2017, 07:29 PM
I still have the DB1. Was having electrical issue so it sat for a while, but i just got it running last week.
Took this pic last week....
http://img.photobucket.com/albums/v219/frozenrice/43BA1763-573F-4EAB-8353-1ACD913B18AD_zpsevlc5e7i.jpg (http://smg.photobucket.com/user/frozenrice/media/43BA1763-573F-4EAB-8353-1ACD913B18AD_zpsevlc5e7i.jpg.html)