The Official 2nd Gen Integra Thread

[Speed_Dreams]

How much are the bulbs going to be??? cause i might be interested.

But in other news i just got my short shifter in the mail today. looks pretty sweet. it looks like it will shorten the shifts by like 50%

[freakin]

So, back to the beers......:thumbsup:
Does everyone want to meet on the weekend of April 9th? I could go for either day....just let me know what works for everyone. Also would a south, north or central location work best? I vote south or central .

[frozenrice]

Raybrigs are $62.99 (US) a pair and the Polargs are $64.99(US) a pair. Plus shipping and all that other customs crap. I'm thinking we should be able to save on shipping at least and I'll ask to see if they'll give a further discount if we buy multiple sets (more sets=bigger discount?)

Here's who's in so far:

me
dirty magic
freaking (?)
speed dreams (?)

freakin, too bad your car's a 4 door. the place that I'm looking at buying these bulbs from has the thin mouldings for DA's.

[dirty_magic]

I wont be back till April 9th, so the Sunday is a prime time. I vote South or downtown, provided someone can hook me up with a ride. Where are we going to go? Anywhere have good drink specials? or something to do while we are having a few, like playing pool or bowling or something stupid?

[frozenrice]

Anybody know who owns/drives a white G2 2door with beyond.ca and team integra (DA9B?) stickers on it? Light mods-tinted windows, lowered, 17"(?) rims, exhaust? I saw him this morning at the lights on Heritage and 14th St.

I noticed that there are a few more G2 owners on this site, but they never post here. Too bad, cause the more G2'rs the better.

[gen2teggy]

i love my g2 integra haha kinda off topic, lets meet up somewhere in the SE! hahah i havn't really post here inna while:)

[frostyda9]

Originally posted by gen2teggy
lets meet up somewhere in the SE!

I dunno man, I don't want my car to get stolen :rofl:
I vote for central or SW. Chinook area is always a good meetup point beacuse there's easy access to it from all quadrants

[gen2teggy]

dont u guys alway meet up tyhere?

[frozenrice]

Any of you guys ever change your own brakes (rotors and pads)? I can't get the damn screws that hold the rotor off. I even went as far as getting an impact screwdriver with the anticipation of the screws being hard to get off and ended up ruining the bit. Now the screws are in the begining stages of being stripped as well. Off to find a garage tommorrow to get them off. :banghead:

[b16Ateg]

i did my all my brakes my self.. you jsut have to spray some wd40 on them or anti locking shit onto them they will come off if you use some arm power

[dwillms]

Any of you guys ever change your own brakes (rotors and pads)? I can't get the damn screws that hold the rotor off. I even went as far as getting an impact screwdriver with the anticipation of the screws being hard to get off and ended up ruining the bit. Now the screws are in the begining stages of being stripped as well. Off to find a garage tommorrow to get them off.

Common problem. Soaking down the screws and then going at them with an impact driver tends to work for most people, but not all. Another thing you can do is try hitting the rotor with a hammer to try to break the screws loose, from the back usually works best.

Worst case, you can drill out the screws and take them out. Because they can be so hard to get off, a lot of people don't put them back on once they replace rotors. All they do is make changing pads easier, by holding the rotor on the hub when you take the caliper off.

-Dustin

[Moonracer]

Originally posted by gen2teggy
dont u guys alway meet up tyhere?

Well the beyond/403honda meets are there every wednesday night. We however are not always there every week.

[gen2teggy]

Originally posted by frozenrice
Any of you guys ever change your own brakes (rotors and pads)? I can't get the damn screws that hold the rotor off. I even went as far as getting an impact screwdriver with the anticipation of the screws being hard to get off and ended up ruining the bit. Now the screws are in the begining stages of being stripped as well. Off to find a garage tommorrow to get them off. :banghead:

i've changed my pads brfore very ez...but i never tryed my rotors

[gen2teggy]

Originally posted by Moonracer


Well the beyond/403honda meets are there every wednesday night. We however are not always there every week.

wtf! u guys alwasy meet up every week??!!

[Moonracer]

Originally posted by gen2teggy


wtf! u guys alwasy meet up every week??!!

Noooo like I said the beyond/403honda meets there every week. We occationally will go to the meets. But for our own G2 cruises that is also where we meet. :D

[dirty_magic]

yeah, wd40 is your best friend when it comes to brakes.

So, my internet has been disconnected, making it hard to check in here about what we are getting going. What does everyone want to get going?

[frozenrice]

:clap: I tried all the garages in my area of town today and they were either booked up or didn't have a mechanic working today. So I ended up going and getting a bolt/screw extractor and drilled the shit out of the screw and removed them damn things with a ratchet. This was on top of spraying them down with penetrating lube (not the KY type). Worked like a charm the first time so I ended up doing them all this way without even trying a screwdriver. End rant.....

[Moonracer]

Originally posted by dirty_magic
I wont be back till April 9th, so the Sunday is a prime time. I vote South or downtown, provided someone can hook me up with a ride. Where are we going to go? Anywhere have good drink specials? or something to do while we are having a few, like playing pool or bowling or something stupid?

I could do a sunday

[b16Ateg]

thought i would share this with you guys.. has helped me out alot on my car

http://www.integra.orcon.net.nz/info

[lam-boy]

Originally posted by Moonracer


I could do a sunday

that sunday will be my birthday :D

[Moonracer]

Originally posted by lam-boy


that sunday will be my birthday :D

Did you have anything planned? If not now you could have a party :bigpimp:

[freakin]

How does meeting up on Sunday April 10th for bowling at Chinook sound to everyone? Either that or meet up at a pub near there?

lam-boy, is your birthday on the 10th?

[lam-boy]

well I am gonna see if I can take the evening off from work, I don't have anything planned yet because it is a Sunday after all. Work/School next day for everyone.

and yes, the 10th is my bday :D

[frozenrice]

Here's another idea. How about that video arcade place in Eau Claire market (if it's still there)? I think there's pool tables and it's downtown so it's central to everyone. It's been a while since I've been down there, but there were some cool multi-player driving games. If it's on Sunday afternoon/early evening I can make it out.

[QuasarCav]

I'm down for some arcade games. I'll school you all at time crisis. 2 year of military training wont go to waste!


Get some dates finalized, I still have to meet you guys and show off my green/black teg.

[Moonracer]

Originally posted by frozenrice
Here's another idea. How about that video arcade place in Eau Claire market (if it's still there)? I think there's pool tables and it's downtown so it's central to everyone. It's been a while since I've been down there, but there were some cool multi-player driving games. If it's on Sunday afternoon/early evening I can make it out.

Yeah eau claire would be fun, I'm down for that on the 10th.

[dirty_magic]

the 10th is perfect, ill be nice and tanned and recovering from a 7 day drinking binge. But some more beer couldnt possibly hurt. Im down for whatever, Ill just keep checking in on the thread. Ill be in Calgary in a matter of hours, 535pm to be exact.

[Moonracer]

Would anyone be interested in a custom one or two month calander of their car?

Sample

[freakin]

Eau Claire sounds good to me. Let's do that. Just watch out with parking.....the meters are all Impark at Eau Claire, expensive and they're not getting any of my money!! Should be free parking on the streets though, so I'll hit that up.

Sandino, that's one sexy pic in that calendar. I'd take one :bigpimp:

PS, is that your pic or Mikes? That looks like a slightly different angle than the one I have.

[Moonracer]

Originally posted by freakin

Sandino, that's one sexy pic in that calendar. I'd take one :bigpimp:

PS, is that your pic or Mikes? That looks like a slightly different angle than the one I have.

Yeah that's one I took. :) Naturally I'm charging a small fee of a big $5. It's printed on heavyweight matt paper which is perfect for the calender. I can use whatever pic you like so let me know. If there's enough interest I'll print them all off and hand them out on the 10th.

[freakin]

Originally posted by Moonracer

It's printed on heavyweight matt paper which is perfect for the calender.

HAHA that made me laugh

I'd take one....let me know if you have some good pics of my car, or of the whole crew. That one you have in the sample looks good to me. Do you have more like that hosted somewhere? I would'nt mind pilfering through them if that's cool.

[Moonracer]

^^^:rofl: oh shit I didn't even catch that one.^^^
You can click the links in the first post of this thread, all the pics are there.

[freakin]

I looked at your pics....every second pic on each page is a red x. Of the pics that I can see, I can't find that specific pic. The closest is on meet 3, page 2 of all our cars parked in a line on the side of the highway.

[Moonracer]

Originally posted by freakin
I looked at your pics....every second pic on each page is a red x. Of the pics that I can see, I can't find that specific pic. The closest is on meet 3, page 2 of all our cars parked in a line on the side of the highway.

Weird they all show up for me. :dunno: That's it I'm not putting anymore pics on that damn site. It's to inconsistant.
There are these two
clicky (http://www.supercars.net/Pic?s=7&y=2004&m=G2%20Integra&o=Meet%203%20pg.1&p=http://www.supercars.net/servlets/PW/garagePics/Moonracer/222car3.jpg&b=http://www.supercars.net/garages/Moonracer/222v2.html)
clicky2 (http://www.supercars.net/Pic?s=7&y=2004&m=G2%20Integra&o=Meet%203%20pg.2%20&p=http://www.supercars.net/servlets/PW/garagePics/Moonracer/223car2.jpg&b=http://www.supercars.net/garages/Moonracer/223v2.html)

[frozenrice]

How about a all Calgary G2 Integra calendar? I'd get one for sure. Anyways, I'm glad you guys like the Eau Claire suggestion. I've been carrying these tokens around for a while- now I can use them up. Should we meet there or somewhere else so that can have a mini cruise down there?

[Moonracer]

I was planning a G2 calender for the end of the year. I'll have to send it away to get it done cause it's just not cost effective for me to do. I'd have to charge like $60 per 12mo. calender. :eek:
I could just do up whatever one you want each month starting in april and make your calender one month at a time?

Matt I decided to print one off for the hell of it to see what this format looks like. This one is cool cause the pic is large and takes up most of the page as you can see.

[frozenrice]

Originally posted by Moonracer
I'd have to charge like $60 per 12mo. calender. :eek:


That's okay then, I'd rather spend the money on Raybrigs or PIAA's. LOL!

[Moonracer]

Originally posted by frozenrice


That's okay then, I'd rather spend the money on Raybrigs or PIAA's. LOL!

No doubt so that's why I'd send it out and it would only be half that. :tongue:

[gen2teggy]

on the 10th? what time?

[Moonracer]

dunno meet at chinook @ 11AM??? Cruise downtown from there...

[frozenrice]

That's way earlier than I'd expected. How about sometime mid afternoon? Chinook's a good place to meet though.

[gen2teggy]

how about we all meeet at eu clire...around 5:50 or6 ish...at the back parkinglot....or around 4ish i dunno

[Speed_Dreams]

haha thats a nice shot sandino....it remindes me of when i had a fog light in the drivers side of my car

[dirty_magic]

im in calgary now, and i believe my flight on the 9th is an evening or late afternoon flight, so the time that we meet on Sunday doesnt really matter to me. Who lives in the SW? that could pick up a fellow G2er? Ill buy lunch or something.

[QuasarCav]

I'm in the SE close to Chinook. A meet and cruise sounds great.

Anyone have a OBD-1 O2 sensor laying around? I need one from a 92-93 and dont want to pay acura 240 dollar for it.

[freakin]

I'm not sure if I'll have wheels on Sunday......aparantly my wagon hates me. Worst case scenario, I'll ride a bike to Eau Claire.

I think early afternoon works....but if you clowns are going cruising, can someone pick me up? :D

Either that or I'll roll in with on my new 20 inch wheels :rofl:

[freakin]

Originally posted by QuasarCav
I'm in the SE close to Chinook. A meet and cruise sounds great.

Anyone have a OBD-1 O2 sensor laying around? I need one from a 92-93 and dont want to pay acura 240 dollar for it.

I saw some EF hatches at pick your part a couple weeks ago....not sure if the use the same sensor though.

[dirty_magic]

if i had known you needed an o2 sensor, i could have brought one from home. but yeah, youll probably be able to find one pretty easily

[QuasarCav]

www.sparkplugs.com is selling the denso part for around 50 USD. I've heard bad things about the bosch universal so I would rather use an OE part.

[dirty_magic]

im pretty sure that all obd 1 o2 sensors are the same.

[Speed_Dreams]

Originally posted by dirty_magic
im pretty sure that all obd 1 o2 sensors are the same.

hey yo guy i might be able to give you a ride if you don't mind riding with limpy long dong :poosie: or in the back seat ahhahahahaha. anyways let me know 835-1992

[Moonracer]

Originally posted by freakin

I think early afternoon works....but if you clowns are going cruising, can someone pick me up? :D


What end of town are you in?

[b16Ateg]

mike give me a call if you need to get picked up at the airport let me know.. 4614337

[frostyda9]

Originally posted by freakin
I'm not sure if I'll have wheels on Sunday......aparantly my wagon hates me. Worst case scenario, I'll ride a bike to Eau Claire.



Hmm....possible future G2 MTB "cruise"? That'd be sweet.
Who else rides? And Matt, what's wrong with the brick?

[freakin]

Originally posted by Moonracer


What end of town are you in?

I'm down south...pretty close to Fish Creek station. And I have some gas money in my pocket :D


Originally posted by frostyda9


Hmm....possible future G2 MTB "cruise"? That'd be sweet.
Who else rides? And Matt, what's wrong with the brick?

I'd definately be down for some riding. And like I said, I'm right beside Fish Creek, so I could show you guys some really good single track.

The brick is having a bit of an ignition problem. Basically the reason I got it so cheap is starting to pop up. There's something seriously wrong with the ignition, but I think I'll have it licked once I get to pick your part. Basically the tach will drop to zero while I'm driving (motor still spinning, but no power), then the car will slow down. Sometimes it'll come back on with no warning, other times I'll have to pull over and give it a couple minutes. Then it fires back up and drives fine. Lately though, it doesn't want to start back up. I've replaced the ECU and the distributor sensor (the part that sends the tach signal). I'm going to try a relay that feeds the ignition system....after that I'm stumped.

I did get the manual boost controller on it though....and HOLY CRAP!! :eek: :burnout:
Now I just need to mount my gauges so I know how much boost I actually introduced, hehe. :nut:

I need to stop playing with this wagon and concentrate on getting my teg back on the road.

[frozenrice]

Originally posted by frostyda9


Hmm....possible future G2 MTB "cruise"? That'd be sweet.
Who else rides? And Matt, what's wrong with the brick?

I'd ride, but my bike doesn't have an cigarette lighter or ashtray.....


frosty's green twin:

http://img.photobucket.com/albums/v219/frozenrice/PICT0147.jpg

[frostyda9]

Originally posted by frozenrice


I'd ride, but my bike doesn't have an cigarette lighter or ashtray.....


frosty's green twin:

you don't need an ashtray man, I prefer just to ride along with a smoke hanging out of my mouth giving a nod to the self righteous eco hippies with "one less car" stickers on their bikes. They can't do anything but shake their head as I roll by :rofl: My cigarettes are bad of course, but the 1/2 ounce of dope they smoke a week is ok because, technically, it is a product of nature :rolleyes:

And that car almost is my twin :eek: looks like it's either a 92 or 93 GS, but otherwise very close.

[frozenrice]

I used to cycle tons way back when. My lifestyle and habits have changed a lot since those days so the thought of me riding again makes me wheeze.

The rims and painted mouldings remind me of your car. Naturally though, white is the nicest colour.

[lam-boy]

Originally posted by frozenrice
The rims and painted mouldings remind me of your car. Naturally though, white is the nicest colour.

black > white!

allright guys, im gonna try to take work off on my birthday and come out cruising with you guys. (how long will we be out for? i am gonna go eat with the family that night as well)

[Moonracer]

Originally posted by freakin
I'm down south...pretty close to Fish Creek station. And I have some gas money in my pocket :D

Ok I'm way down south too by mackenzie town so I can pick you up if you like.

*do we have a time set yet? 3 pm?

-Dave, you know I'm up for some riding. :D

[Speed_Dreams]

ok lets put some details in stone here. it never works when 4 people try to plan a meet. so 3pm @ chinook sunday the 10th. and then cruise downtown ?? is that what im getting here?

I dunno im not on here much anymore so someone give me a call with the Details.

Cheers

[Bert3734]

Alright im here in the States in ohio. Just thought I would share me 2nd gen with all you guys

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_1.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_2.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_3.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_5.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_7.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_9.jpg

http://memimage.cardomain.net/member_images/2/web/794000-794999/794007_4.jpg

I know its not the prettiest looking thing, but its pretty damn fast. I plan on getting it repainted after i graduate in May (people have no respect for others cars on campus)

[lam-boy]

nice car, what kinda numbers you putting down?
what kind of engine and mods are you running? :thumbsup: :D

[frozenrice]

Originally posted by Speed_Dreams
ok lets put some details in stone here. it never works when 4 people try to plan a meet. so 3pm @ chinook sunday the 10th. and then cruise downtown ?? is that what im getting here?

I dunno im not on here much anymore so someone give me a call with the Details.

Cheers

I go with what speed dreams is saying.

[Moonracer]

Originally posted by Speed_Dreams
ok lets put some details in stone here. it never works when 4 people try to plan a meet. so 3pm @ chinook sunday the 10th. and then cruise downtown ?? is that what im getting here?

I dunno im not on here much anymore so someone give me a call with the Details.

Cheers

:thumbsup:

[freakin]

Originally posted by Speed_Dreams
ok lets put some details in stone here. it never works when 4 people try to plan a meet. so 3pm @ chinook sunday the 10th. and then cruise downtown ?? is that what im getting here?

I dunno im not on here much anymore so someone give me a call with the Details.

Cheers

:clap: :burnout:

[b16Ateg]

someone jsut call me and let me know whats going on and i might come

[Speed_Dreams]

Originally posted by b16Ateg
someone jsut call me and let me know whats going on and i might come

you need to get your ass out to an integra meet and quit being a hermit you are coming even if i have to kidnap you!

[Moonracer]

Yeah stop letting your penis rule your life. :rofl: Oh yah how's the g/f?

[QuasarCav]

Originally posted by Moonracer
Yeah stop letting your penis rule your life. :rofl: Oh yah how's the g/f?


Who else should rule? My brain does a shitty job.

Any plans for the weekend? I printed out a bunch of teg tips and I'm going to try a few things.

[Moonracer]

Originally posted by QuasarCav



Who else should rule? My brain does a shitty job.

Any plans for the weekend? I printed out a bunch of teg tips and I'm going to try a few things.

I hear ya but I have been doing a pretty good job lately. :nut:

Man you are going hardcore on your teg. Can't wait to actually see it in daylight. I have some unveiling to do myself :D

[QuasarCav]

Originally posted by Moonracer


I hear ya but I have been doing a pretty good job lately. :nut:

Man you are going hardcore on your teg. Can't wait to actually see it in daylight. I have some unveiling to do myself :D


1600+ in parts, only $600 of which are installed. Clutch and flywheel will go in shortly and then the spoiler, gas cap, ST rear sway bar, one pieces, H&R springs.

Let the good times roll!

[gen2teggy]

okay soo 3mp at chinnok and drive downtown

where in the paring lot will we meet?

[frozenrice]

Typically if the weather's nice outside, we meet on the top level of the parkade off of 5th St. If it's crappy outside, it'll be in the same parkade but at the lowest level.

[lam-boy]

allright guys, I'm down for sure!

[Moonracer]

hmmm anyone see anything new?

[Moonracer]

2

[frozenrice]

:eek: Nice rims!!! The red H is nice too.

[Moonracer]

^^^ah you cought that eh the "H"^^^
yeah I blew off the acura one at the carwash and to replace it with a stock "A" is like $50 :eek: no thanks. Besides I think the red H looks better and it goes with my color scheme.

[frozenrice]

Originally posted by frozenrice
Hey Drew, there's not a whole lot that I can think of at the moment. The only other thing I can think of is 90-91 bumper lenses, but I think you said the ones off the parts car were toast. If you've got them though, I'll take them along with the plugs.

Drew, is our trade still on? I'll bring the lip if you can bring that other stuff.

[Speed_Dreams]

Originally posted by frozenrice


Drew, is our trade still on? I'll bring the lip if you can bring that other stuff.

ya i just gotta find where i put those plugs....it was like 3 weeks ago that i took them off. i know where the parking lights are.....

HOpefully my One peices will be installed for you all to see. i got my springs and shocks in yesterday. and what a difference...its like a brand new car. i love it.

[Moonracer]

Originally posted by Speed_Dreams


ya i just gotta find where i put those plugs....it was like 3 weeks ago that i took them off. i know where the parking lights are.....

HOpefully my One peices will be installed for you all to see. i got my springs and shocks in yesterday. and what a difference...its like a brand new car. i love it.

:clap: glad to hear I bet you are lovin it.

[frostyda9]

Originally posted by Moonracer
hmmm anyone see anything new?

Hmmm maybe you washed it? I dunno :dunno: ;)

Looks good :thumbsup:

P.S. Sandino: going down to McKenzie today to fill out paperwork on a place I found down there :D Finally!

[JordanEG6]

lotta nice tegs in this thread
:thumbsup:

[Moonracer]

Originally posted by frostyda9


Hmmm maybe you washed it? I dunno :dunno: ;)

Looks good :thumbsup:

P.S. Sandino: going down to McKenzie today to fill out paperwork on a place I found down there :D Finally!

:clap: hehe we'll be neighbors again

[Moonracer]

Hey guys don't for get to sign up for the beyond cruise in june if you are interested in a major event. There's already around 30 signed up and it's only been posted for a few days.

click for beyond cruise thread (http://forums.beyond.ca/showthread.php?s=&threadid=82141)

[freakin]

Originally posted by Moonracer
hmmm anyone see anything new?

Is the exhaust new as well? The H and rims are looking pretty damn nice though.....kinda makes me want to ditch my 17's.



Dave, and anyone else interested....I'm going to check out Fish Creek on my mountain bike sometime this week to see how the trails are looking. Anyone intersted in joining me? It likely won't be until 6PM, but with the new day-light savings, that should afford us a couple of hours riding time. Given how early in the season this is, I'm sure that's as long as I'll last.

[Moonracer]

Originally posted by freakin


Is the exhaust new as well? The H and rims are looking pretty damn nice though.....kinda makes me want to ditch my 17's.



Dave, and anyone else interested....I'm going to check out Fish Creek on my mountain bike sometime this week to see how the trails are looking. Anyone intersted in joining me? It likely won't be until 6PM, but with the new day-light savings, that should afford us a couple of hours riding time. Given how early in the season this is, I'm sure that's as long as I'll last.

yeah the muffler has been on for just over a month I think.
I'm liking the smaller look these days and the weight savings...

I might join you biking if im not working on the day you go

[lam-boy]

gonna show off some pics today, hehehe

[frostyda9]

Matt, when are you thinking of going?

[freakin]

Any night except tuesday.....The Doctor Who premier is on :thumbsup:

Let me know when you guys are free. I'll likely be riding tonight regardless of the response. My hardtail looks so lonely and neglected. I need to take her out and show her that I still care. I'm sure I'll be breaking something, so I'll me tuning her up before I head out. I'm thinking of going around 6-6:30 if you're interested.

[Moonracer]

don't think I'll make it today but I'll keep you posted on what nights I am off.
What are you riding matt? My mountain bike is a GT Zaskar. Daves is even more :bigpimp:

[freakin]

Looks like I'm out tonight anyhow....to tired to ride. How does Wednesday or Thursday night sound to you guys?

Ohh, and I'm riding a bastardized little Cannondale F600 hardtail. I was given the frame and I put all the parts I've accumulated on it. Essentially it's a big BMX. :D

[Moonracer]

haha a bmx, does it only have one speed?

[frozenrice]

frosty, how did it cost you to get that leather seat fixed? I might have found a set but the fronts are pretty chewed up, so I'd like to get an idea of how much it'd be to get them redone.

[frostyda9]

Originally posted by Moonracer
Daves is even more :bigpimp:

:rofl: Mine is an anorexic museum piece man. If you weigh more than about 150 you can't ride it without risking breaking something :nut:

I hope we can find a time to go. I'll be running around like a chicken with it's head cut off most of the week, but (with the exception of tomorrow) if you set a day I'll try to make it.

[frostyda9]

Originally posted by frozenrice
frosty, how did it cost you to get that leather seat fixed? I might have found a set but the fronts are pretty chewed up, so I'd like to get an idea of how much it'd be to get them redone.

It was $175 to replace the side bolster and the two main sections in the ass part of the seat. When they did it, they used a high quality vinyl, not leather...but it matches up pretty well.

The shitty thing is that the whole seat has to come apart to replace the bad sections. The good thing is that once it's all apart it shouldn't be *that* much more to fix a couple more little areas.

If you have nasty cracks in the seats, a few good bouts of leather moisturizer should help things a little. I did that, then touched up the visible cracks with just a touch of Tana black shoe polish. It's amazing how much it can blend the cracks into the seat.

Here's a pic of before and after the touch up...

[frozenrice]

What do ya figure for these ones?
http://img.photobucket.com/albums/v219/frozenrice/leather2.jpg
http://img.photobucket.com/albums/v219/frozenrice/leather1.jpg

[Moonracer]

Originally posted by frostyda9


:rofl: Mine is an anorexic museum piece man. If you weigh more than about 150 you can't ride it without risking breaking something :nut:

I hope we can find a time to go. I'll be running around like a chicken with it's head cut off most of the week, but (with the exception of tomorrow) if you set a day I'll try to make it.

No doubt...lol good thing you are a lightweight. I should know tomorrow after lunch if I work

[frostyda9]

Originally posted by frozenrice
What do ya figure for these ones?


Hard to say. If it were me, I'd just replace those really nasty parts on the passenger seat, which would probably cost about the same as my seat did.

How supple is the leather? If it hasn't been treated for a long time, the stitching may get destroyed during removal and installation of the cover. If the leather is half way soft and the price on the seats is good though, I say go for it :thumbsup:

How much is he asking?