Need a turbo timer and catch can

[GoChris]

I am most likely going to be picking up an 04 SRT4 maybe this weekend but if not definately next week.

Now, I know the turbo timer isnt needed for average driving, but I am not average and the turbo timer wont hurt and definately give peice of mind right.

So, what is a good, and not too expensive one I can get for this car? Too bad mopar doesnt make one.

Also a catch can, where the heck can I pick one up? Should be a simple install right?

I am getting the car for about $25k including freight, tire levy, all those extras, just not gst, good price? Its loaded.

[Aleks]

Im not sure about where you can get a catch can, maybe Mopac??
25K is a really good price man! Are you picking it up from the Automall? Congrats and have fun!!!

[GoChris]

I actually have to go up to edmonton to pick it up, only one in alberta thats what I want.

[QuasarCav]

Have you sold the SiR?

[GoChris]

yup, sold it in september

[HillBilly]

I have an HKS turbo timer and I love it. Harness just splices right into existing wires. All you have to do is hook up an e-brake wire. This so if you leave the car and it is still running, some jackass can't steal the car cuz as soon as the e-brake comes off, it kills the engine.

[GoChris]

mopac says no to the catch can

[Aleks]

Something like this maybe?

http://www.honda-tech.com/zerothread?id=989274

[EK 2.0]

Contemporary Motorsports can get you a GReddy Catch can...

call them up...ask for Greg...he will steer you strait...

[GoChris]

Ok great, and I called RCTS for that hks turbo timer, $140, seems like a good price to me :dunno:

[HillBilly]

Originally posted by rlde.us
Ok great, and I called RCTS for that hks turbo timer, $140, seems like a good price to me :dunno:


get them to throw in a SRT-4 harness for that price.

[canadiandaytona]

Originally posted by CycloneAWD
Contemporary Motorsports can get you a GReddy Catch can...

call them up...ask for Greg...he will steer you strait...

any idea on Price?

[Dick Starbuck]

Pdm-racing sells their own. It's $66.50 US, their located in Vancouver, but use American on their site for some reason. All catchcans work the same so you may as well get a cheaper one if you can. The only differences will be fitting sizes depending on the vehicle. I don't know what size srt-4s use.

Another option is to just use a filter.

I like the Blitz Fatt turbotimer it costs less than hks' and its really easy to mount anywhere because the control unit is separate from the brain.

[89coupe]

I bought my catch can from Best Buy. $80

Why do you need a turbo timer?

http://www.performance-shop.com/bradsstuff/DSCF0324.JPG

[finboy]

better yet, why a catch can? :dunno:

i just used a crank case evaquation set up from mopac

[vegas2005baby]

Originally posted by finboy
better yet, why a catch can? :dunno:

i just used a crank case evaquation set up from mopac

yea, i dont see a point in having a catch can on a car designed for boost. maybe if it was a honda or some shit.

[GoChris]

well, I see the point so...thats why I was asking about the parts, not the opinions ;)

I'll go look for some cheap catch cans, i dont think its worth paying for a greddy one, I could put 2 in for the price of that one.

[finboy]

Originally posted by rlde.us
well, I see the point

which is :dunno:

[googe]

does the srt4 not have a water-cooled turbo?

[Will@STRD]

I haev both Apex-i and Greddy turbo timer in stock if you are still looking for it PM me

[SpoonEK9@STRD]

Originally posted by Will@STRD
I haev both Apex-i and Greddy turbo timer in stock if you are still looking for it PM me
also a new model greddy catch can in stock.

[1-Bar]

Originally posted by CycloneAWD
Contemporary Motorsports can get you a GReddy Catch can...

call them up...ask for Greg...he will steer you strait...

Bling bling, Greddy catch can....Thanks again Greg :thumbsup:

[vegas2005baby]

Originally posted by googe
does the srt4 not have a water-cooled turbo?

nope, it has a water cooler center section, pretty much eliminating the need for TTs, but people like them anyways, I"ve seen them called 'auto timers' and used on s2ks, and celicas and shit.

[canadiandaytona]

Originally posted by finboy
better yet, why a catch can? :dunno:

i just used a crank case evaquation set up from mopac
How does this one work?

[finboy]

Originally posted by canadiandaytona

How does this one work?

its pretty much a checkvalve that is welded into your exhaust system and then you run a piece of heater hose from your crank case to the check valve.

$50 for 2 of them at mopac

[canadiandaytona]

ah that one!

[EFHatch]

you bastard, going away from honda...

so no more coming to the meets i guess :(

[finboy]

Originally posted by canadiandaytona
ah that one!

yea, its not as bling as a greddy catch can, but it works and only costs $25 if you find someone else to buy the other one off of you.

[djfob]

Here's what I'm using for a catch can...it's an air compressor air/water seperator that cost me $15 usd shipped. I just set it up today so i'll let you guys know how it works out.;)

[GoChris]

Yes ive seen quite a few installs on the net using like air compressor line filters and such. I might do that cause I gotta put a bunch down on the car so money is tight for the rest of the month.

I got my buddies shop to call and they wanted $85 for the mopar BOV which seems kinda expensive. Anyone know where else I could get it cheaper? It retails for $60 USD I beleive and that 85 was their shop cost which is stupid.

[finboy]

Originally posted by rlde.us
Yes ive seen quite a few installs on the net using like air compressor line filters and such. I might do that cause I gotta put a bunch down on the car so money is tight for the rest of the month.

I got my buddies shop to call and they wanted $85 for the mopar BOV which seems kinda expensive. Anyone know where else I could get it cheaper? It retails for $60 USD I beleive and that 85 was their shop cost which is stupid.

the mopar "BOV" isn't really a blow off valve, its a piece of metal you insert to vent your current blow off valve to atmosphere

[GoChris]

Originally posted by finboy


the mopar "BOV" isn't really a blow off valve, its a piece of metal you insert to vent your current blow off valve to atmosphere

Ya, i know. its mainly for sound, but thats ok.

[7thgenvic]

what about the H22 you bastard! hahahah

[GoChris]

dude, its going in, waiting on ryan to say when, I asked him if we could do it on the 20th! want it in asap!