where can i get turbo flanges??

[wontonjohnny]

i need a flange for a ct26 oil feed/drain, coolant line flanges and a turbine outlet flange...

can anyone help me out??

[finboy]

mopac?

[Primer_Drift]

Mopac doesnt stock much in the way of flanges.. if you have your turbo off, I suggest taking it to Alamo to see if they have anything that matches.

[pressure_ratio]

It looks like your about to get a lesson in fabrication.Alamo might have them but I doubt it,so grab some steel,a hacksaw,drill and a file and have at it.

[white rice]

i can make you some jsut bring me your turbo and no prob.

pm me if you are interested.

[wontonjohnny]

shiet .. too late... i already ordered my flanges from rabidchimp.com.. costed me queit abit.. but i will keep you in mind if i need other custom flanges...

can i ask how you would of made them??? you have a machine shop???

[pressure_ratio]

I usually make mine with a drill press and a grinder,plasma works awesome.

[Dirty_SOHC]

if you need to you can always get a flanges cut at Laser equations for big bucks

[AllGoNoShow]

No offence but you probably got ripped off, if you can, cancel the order and claim you ordered the wrong thing or something, there is atleast 3 people here who can make them and there are tons of places locally and others here who haven't posted yet hwo can make you flanges for just a few bucks.

[Ekbusta]

he ordered them almost a month ago, I doubt he got ripped off anyway. Most flange websites offer them cheaper then getting someone with a CNC machine to one off it.

[245gti]

Originally posted by Dirty_SOHC
if you need to you can always get a flanges cut at Laser equations for big bucks

Laser Equation isn't that bad if you buy in quantity. In fact, I'd say they're pretty reasonable. If a number of people need the same flange, that would be the way to go. If you only need one, there are a number of on-line places that are pretty cheap....just search 'em out... eBay is a good place to start....

[wontonjohnny]

i ordered 5 flanges from them for 125 CAD shipped but i still havent recieved them

the five are:

turbo inlet
turbo outlet
oil feed/drain flange - drilled and tapped
2 coolant flanges - drilled and tapped

[Police]

you did not get ripped for 125 shipped that is a pretty good deal for everything and shipping.

[wontonjohnny]

if i dont get them i got ripped off... ive emailed the site like 3 times during this week.. still no replies

[AllGoNoShow]

Yah, if you don't get them you got ripped ;) if you don't and need a local place, check out Colecraft or something.

[245gti]

Ummm...isn't Laser Equation local? I've been there.....

Local as in Calgary.....

Why not go pick your order up?

[AllGoNoShow]

He didn't order them from Laser so how could he pick an order up from a place he didnt order from? Read ALL the posts first..

[245gti]

Hmmm...you may be right. I suppose the fact that the 5 preceding posts to mine were referring to Laser Equation just MIGHT have something to do with my answer?? And the fact that his post directly succeeded my post regarding Laser Equation?? Perhaps if he was posting a reply to some post other than the one directly preceeding it, he might have quoted the other post...............

Don't worry about it. I only came here to try and help some of the younger crowd. I was working on cars before most of you were born. I don't have time to read ALL the drivel in EVERY post. I skim over it and try to catch the important stuff. I'll stick to moderating another board and leave this one to you kids....

Later...

[wontonjohnny]

got them in today.. all is good.

steel flanges are 1/2 inch thick :thumbsup: