The Official S13 Thread

[86max]

Welcome to the official S13 thread. Like the G2 Integra thread except better :D haha jk

A thread which will be dedicated to one of Japan's greatest FR creations, the 240sx/180sx/200sx and Silvia. Primarily focused on the S13 chassis, but welcome to people with S12's, 14's and 15's.

Basically a place where one may talk to other S13 enthusiasts to learn more about their car, discuss problems they may have, find out about new parts which have become available, or just chat. The possibilities are endless, and since the majority of Beyonders are in Calgary, we can always meet in person through cruises or events to discuss and show off every aspect of these sweet machines :)

If enough interest is taken, the thread may become a useful information resource for anyone with an S13, or someone wanting to get one. On that note, I think I speak for almost every S13 owner when I say I don't want to be answering "how much $$ does an sr20 swap cost" every day.

Anyways, I guess we'll see if this takes off, or if it flops. Post pics of your S13 if you want, give some tuning tips, etc.

Thanks:thumbsup:
Andrew

[lam-boy]

how much will it cost to put sr20 into my g2 integra?
HAHAH take that you bastard!

[86max]

More than you have;)

[dj_rice]

lol

How much will it cost for a KA24DE-T lol

[86max]

Oh man...:rofl:

Look what you did Lame-Boy

So.........about that 240 on pimp my ride......nice car eh:burnout:

[lam-boy]

haha, take that!

[Zephyr]

uhh.... is dj rice and i the only real s13 owners that posted in this thread so far?

[BloNdie]

Originally posted by lam-boy
haha, take that!

you're just jealous! ;)

[86max]

Originally posted by Zephyr
uhh.... is dj rice and i the only real s13 owners that posted in this thread so far?

I have one too.....

Let me introduce myself.

I'm Andrew, I currently own my fourth and fifth Nissan. An 86 maxima and an 89 240 fastback. I've spent the last 8 months or so slowly assembling my 240 with an sr20 in my backyard. Drove it for 3 weeks, then put it away for winter. Over winter I'm gathering more parts to dress it up a little, then I'll be on the streets in spring along with all you other S13 guys.

[Zephyr]

Originally posted by 86max


I have one too.....

oh i didnt know a 240 was also called a maxima :rofl: =P

[lam-boy]

Originally posted by BloNdie


you're just jealous! ;)

no sti for you!

John, 86max's 240 pulls hard!
I almost crapped myself because his seatbelt doesn't work:rofl:

[ninjak84]

Originally posted by 86max
give some tuning tips

Stay the fuck away from Tom's Motorsports Japan coilovers.

[1badPT]

nuttin but :love: for the s13

and I'll turbo the KA24DE instead of swapping it for an SR20DET

nice thread so far :thumbsup:

[86max]

Originally posted by lam-boy



I almost crapped myself because his seatbelt doesn't work:rofl:

It's fixed now :devil:


Originally posted by ninjak84


Stay the fuck away from Tom's Motorsports Japan coilovers.

Good to know....thanks. I was thinking jic, gab, or tein for mine.


Originally posted by 1badPT
nuttin but :love: for the s13

and I'll turbo the KA24DE instead of swapping it for an SR20DET

nice thread so far :thumbsup:

thx, Boost_Infested turboed his ka24de. Havn't seen it run but heard it's fast.

[Zephyr]

Originally posted by lam-boy


no sti for you!

John, 86max's 240 pulls hard!
I almost crapped myself because his seatbelt doesn't work:rofl:

lol my car came without seatbelts except the auto should harness...gave me excuses to buy 4 point harnesses though :rofl:

good suspension for street : tein type FLEX w/ EDFC

both good for track and bumpy ass street roads

[Zephyr]

stay away from megan racing crap until it gets better...the owner is now fond of 240sx and is making more products for the s13..but stay away from them until the products are better to use

[ninjak84]

Originally posted by 86max
Good to know....thanks. I was thinking jic, gab, or tein for mine.

You definitely get what you pay for when you buy suspension.

[Zephyr]

kei office has some new ones out for s13 too....kinda too stiff for regular use though...but good quality stuff... unlike my HEs that are known to go "POP" on the user in any given time... *knocks on wood*

[86max]

Originally posted by Zephyr
stay away from megan racing crap until it gets better...the owner is now fond of 240sx and is making more products for the s13..but stay away from them until the products are better to use


I'm happy with my megan downpipe lol.....don't think too much can go wrong with that

:D

[Zephyr]

Originally posted by 86max



I'm happy with my megan downpipe lol.....don't think too much can go wrong with that

:D

its because megan racing is still that "look they made that so im gonna copy it and use different materials so its cheaper and change the color" type of company. i know a few workers from the company and i been getting discounts on their junk and some free stuff too mainly gauges...so far i can say that the gauges they have are impressive for generic..hard to see during the day, but very pretty colors at night lol megan racing is getting up there but its still too soon to rely on their crap cuz taiwanese brand car products have kinda bad names so far kinda like korean car makers....

[SpoonEK9@STRD]

lol 'pop'. I know people who have had them for 3 years...there pretty durable if you know how to use them. Meaning not having track dampning settings on for the street.

Flexs lick a nut, spring rate blows.

Kei Office :thumbsdow

[Zephyr]

Originally posted by SpoonEK9
lol 'pop'. I know people who have had them for 3 years...there pretty durable if you know how to use them. Meaning not having track dampning settings on for the street.

Flexs lick a nut, spring rate blows.

Kei Office :thumbsdow

lol thats why i said flex is good for street...the spring rate is low enough for it. i been in a s14 with them...it was pretty decent for daily comfort

i had a fellow s13 that had it on 16 setting (lowest soft dampening) and it freaking poped on him when he was backing out of his driveway..

i currently have mine set on 16 so it will be bearable on the street... my freaking dampening clicker on one of the coilovers already broke fawk!

[Zephyr]

but im currently happy with these:

http://memimage.cardomain.net/member_images/6/web/714000-714999/714074_4_full.jpg

but i was thinking of swiching to JIC later on...not tooo sure yet


but first i need to replace my tension rods... im thinking either kazama or TEIN not too sure yet..100 dollar price difference though

[86max]

pic no worky ^^

[Zephyr]

ehhhh http://www.cardomain.com/id/chouchou

dam u cardomain!

[86max]

HE's.....nice:drool:

before I get coilovers I may just get springs and shocks.
I was leaning towards some tein s-tech springs but they only lower 1.5 in the front and 1.2 in the rear. What other good springs would you guys recommend for a 2" or more drop?

[Boost Infested]

dont waste your money on s tech springs, get the rsr race spring if you are not going to get coilovers.

i am sure you all know HUD sucks! :thumbsdow

[Zephyr]

Originally posted by Boost Infested

i am sure you all know HUD sucks! :thumbsdow

awww my HUD works perfectly :D

[statick]

Originally posted by BloNdie


you're just jealous! ;)


:werd: S14's for life:thumbsup: ...except i sold mine:banghead:

[dj_rice]

My cars been stalling alot while its in neutral braking/coasting towards a stop while applying brake for some reason....once I shift into neutral..the RPM just drops straight to 0 and sometimes it stutters but other times it just dies...sometimes I have to actually rev to keep it from dieing and ppl beside me think I'm beefing with them...

Anyone experience the same thing?Happens periodically...

[86max]

Maybe try turning up your idle a little bit, or check your vacuum lines.:dunno: Has it been tuned up lately? (spark plugs/air filter etc)

[Idratherbsidewayz]

Hey, im Greg and I am in between S13's.

My old one was a damn fun car. Here is my cost breakdown for the SR20DET install done at Autodream August 2003.

Engine 3500 (engines are definitely cheaper now)
Labor 1000
Auto to Manual swap 800
Downpipe 300
SMIC 600

Total 6200

Car 1400

Grand Total 7600 for a decently quick 240.

Upgraded performance parts were:
Greddy E-Manage
Turbo back 3" exhaust
255lph fuel pump
Granger valve boost controller

All tuning was done at Lightspeed Innovations in Red Deer.

My car put down 216whp and 213tq at 10psi. Ran a 14.7 @ 90.26 mph.

Anyone considering doing this swap should do it. Such a fun car to drive. It was killed on Nov. 22nd, but a new project is already in the works. By February I should have a 240 breathing that sweet turbocharged air again...



Greg

[86max]

Yeah the swap is definitely worth it. Nice breakdown of costs Greg, Sr's go for about 1g less now;)

My Latest mod: believe it or not......I lost 40kg (approx 80lbs) by doing this, mind you I had some misc garbage sitting in the trunk when I weighed the car the first time, can't have been anything over 15lbs though. She now weighs 1290kg :)

[86max]

Chiseling that sound deadner off is a bitch, weighs a tonne though.

[86max]

Sprayed on some truck bed liner, so it looks clean and I can always throw something in the back. The reason I put the side panels back on was mostly for aesthetic reasons....and comfort level. Thing sounds like a fawking washing machine when driving on water:nut:

[mx73someday]

Originally posted by 86max
Chiseling that sound deadner off is a bitch, weighs a tonne though.

That's sweet, I did that in my Cressida and my guess was about 100lbs savings. Did you just do the back?

[finboy]

Originally posted by 86max
Sprayed on some truck bed liner, so it looks clean and I can always throw something in the back. The reason I put the side panels back on was mostly for aesthetic reasons....and comfort level. Thing sounds like a fawking washing machine when driving on water:nut:

looks awsome man, can't wait to see it back out next summer.

[86max]

Originally posted by mx73someday


That's sweet, I did that in my Cressida and my guess was about 100lbs savings. Did you just do the back?

Yeah just the back, everything behind the front seats.....I wanted to leave the front stock.....again mostly for comfort reasons....and the girlfriend. I did my weighing at the truckstop on highway 2, I doubt it's that accurate but it gave me the general idea.

Oh and that weight is with me in it, another 180lbs easy.

[Idratherbsidewayz]

Originally posted by 86max
Sprayed on some truck bed liner, so it looks clean and I can always throw something in the back. The reason I put the side panels back on was mostly for aesthetic reasons....and comfort level. Thing sounds like a fawking washing machine when driving on water:nut:

Holy shit that looks HAWT. I might do the same without taking out the back seats. The usual carpet in the back is gross.

[MM99lude]

i've never seen your car 86max, mind posting a few more pics?

[86max]

She looks completely stock right now pretty much, but I'll put up a few pics of the engine and stuff tonight.:thumbsup:

[TypeS]

oooo my kind of thread! yea no doubt can't wait to see the car come spring time max, hopefully my CA will be able to hold pace with it by that time:burnout:
BTW is that guy who crashed on deerfoot still parting out his blue silvia? I had my deck installed in the car the other day, and when i finally saw the "install" the next morning in the light....THE F*CKERS SPLIT MY TRIM PANEL!! I swear serves me right for taking it to future shop, but since i was out of work for the day due to cold weather they were the only ones who were able to do it that day and i wanted to get something done.
The plastic trim surrounding the heat/stereo controls and the stick shift is what I'm looking for, and I made it quite clear to them that it's a RHD car and when I FIND the panel, they are paying for it + hassle charge. lol the manager was like trying to tell me it might not have been their installers, but i mean come on....I got the car back at 8pm, go home park it....wake up the next morning in the light... :eek: :whipped:

sooo pissed....oh and by the way what the hell was nissan thinking with those stock speakers....sounds like a dying cat:D

[86max]

HAHA:werd: The speakers = t3h 5uck

That sucks about your trim panel, they probably cracked it while pulling it off. I have a couple LHD ones laying around but no RHD, sorry:(

I've had my trim panel off so many times, so I just broke off the two clips in the middle part, makes for easy install/removal and looks the same. It was so hard trying to find a replacement for my original one(someone had painted it white), that I ended up airbrushing one back to it's original color.

Gotta love the interior on these cars :love: So modern for it's time. The tweed is a little tacky though.

[TypeS]

Im thinking of finding the leather treatment for mine sometime in the future...looks CRAZY nice!
http://www.importconcern.ca/broker/10431/10.jpg
http://www.importconcern.ca/broker/10431/11.jpg

but yea the interior is part of the reason I picked the silvia, the RX-7's and stuff are just too boxy, so "fiero-ish"

[86max]

That leather actually looks pretty nice, but they should've done tre door panels and glovebox too.

[Superesc]

Originally posted by Idratherbsidewayz
Hey, im Greg and I am in between S13's.

My old one was a damn fun car. Here is my cost breakdown for the SR20DET install done at Autodream August 2003.

Engine 3500 (engines are definitely cheaper now)
Labor 1000
Auto to Manual swap 800
Downpipe 300
SMIC 600

Total 6200

Car 1400

Grand Total 7600 for a decently quick 240.

Upgraded performance parts were:
Greddy E-Manage
Turbo back 3" exhaust
255lph fuel pump
Granger valve boost controller

All tuning was done at Lightspeed Innovations in Red Deer.

My car put down 216whp and 213tq at 10psi. Ran a 14.7 @ 90.26 mph.

Anyone considering doing this swap should do it. Such a fun car to drive. It was killed on Nov. 22nd, but a new project is already in the works. By February I should have a 240 breathing that sweet turbocharged air again...



Greg

Nice Very useful information!! man that's a really good deal for a fun 200+ hp car!!

[vietdood]

my trim panel is cracked too, those things are a pain in the ass to take off

[statick]

^mine had one small crack in it before i sold it, and yea its pretty hard to take off etc.

[Idratherbsidewayz]

Originally posted by Superesc


Nice Very useful information!! man that's a really good deal for a fun 200+ hp car!!

Just keep in mind that an additional ~$2500 was spent after the $7600 on all the performance upgrades.

[86max]

You were fortunate to find a good shell for 1400......it's getting kind of hard to do that now.

Make sure your next one is another pignose ;)

[ninjak84]

Originally posted by 86max
Gotta love the interior on these cars :love: So modern for it's time.

:confused:
Then where the fuck are my cup-holders!!!!

[Zephyr]

Originally posted by ninjak84


:confused:
Then where the fuck are my cup-holders!!!!

:rofl: :rofl:

i never buy drinks when im alone now with that car...

well i have two things to brag about... a HUD that works instantly and a non cracked dash woooo

edit: here is your cup holder: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7938616170&category=33695&sspagename=WDVW

[statick]

ninjak84 - didnt u watch bad boys ?

[project240]

Maybe one of you 240 owners out there can help me out with this...

Lately I've been having some problems with my headlights. Normally they pop up when you turn on the lights and retract when turned off. However for the past week or so, they seem to work at times, and not at others. I've manually turned them up a few times, then they might work for a day or so, then they'll retract and won't pop up again. Any ideas to what this might be? I thought it might be a loose connection somewhere, but can't seem to find anything. Can't understand why they work intermittently... Any help is greatly appreciated. I'm getting a little frustrated already turning them up manually already...

THANKS IN ADVANCE!!

[ninjak84]

Originally posted by Zephyr
edit: here is your cup holder: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7938616170&category=33695&sspagename=WDVW

Cup-holders AND a stash box! :clap: What a deal
Ooooh, and it's straight from Japan too.


Originally posted by statick
ninjak84 - didnt u watch bad boys ?

Nope.... why?

project240: Check your fuse box first. The problem might not be a fuse (I'm not sure), but good to have a look first anyway. Then check the headlight assembly to see if any cables are loose/cut. Hopefully someone with better info will post.

[TypeS]

this SHOULD be an easy answer to search for, i'm pretty sure everyone and their dog who owns a 240 has had this happen to them:tongue:
fixed S13 lights rule once again:poosie:

[crazydave]

Originally posted by 86max
Yeah the swap is definitely worth it. Nice breakdown of costs Greg, Sr's go for about 1g less now;)

My Latest mod: believe it or not......I lost 40kg (approx 80lbs) by doing this, mind you I had some misc garbage sitting in the trunk when I weighed the car the first time, can't have been anything over 15lbs though. She now weighs 1290kg :)


that picture looks exacly like my hatch
im dave, i have a 90 240sx with bbs rims and advan rubber,tein coilovers,header back 3inch catback exhaust(that big for a reaoson in the future)some guages. i love my s13!!!!:love: . theres probly other shit that iv done but cant remeber. and i agree about meeting for cruise. im from lethbridge but ill come up to calgs for a cruise and to meet other s13 owners!

[vietdood]

cupholders get in the way when shifting, unless you drive auto

[crazydave]

owell. dont drink and drive then,lol. im just playin but yes they do.

[Idratherbsidewayz]

If im desperate for a cup holder ill take out the change box and put a slurpee or can in there...

[TypeS]

what! your cars didnt come with JDM 'vent-clip-in" cup holders???? weak!! :D
MAN were those things hard to take out...clip-in's from hell:tongue:

[TypeS]

BTW andrew I think we should take charge and open up the calgary S13 club, then we be makin' all the rules! aint no punks tellin' ME where to meet....we be tellin' THEM!:bigpimp:
well i guess it would have to be a 240/180/silvia club....or S13/S14 and wannabe S15's lol
ah skrew it silvias only!!!!! ok if you got a JDM motor your in too but ya'll other punks can find your own club!:whipped:


















I crack me up.....:rolleyes:

[86max]

CUP HOLDERS!!!!!!! What kind of drivers are you guys! Sitting in traffic sipping on a starbucks grande cafe mocha listening to the exhaust note of your tuned super racing machine? pfffftttt:tongue: That's what sedans are for ;)



Originally posted by crazydave



that picture looks exacly like my hatch
im dave, i have a 90 240sx with bbs rims and advan rubber,tein coilovers,header back 3inch catback exhaust(that big for a reaoson in the future)some guages. i love my s13!!!!:love: . theres probly other shit that iv done but cant remeber. and i agree about meeting for cruise. im from lethbridge but ill come up to calgs for a cruise and to meet other s13 owners!

PICS! :D I would've had more pics up last night but I couldn't get on the computer.


Originally posted by TypeS
BTW andrew I think we should take charge and open up the calgary S13 club, then we be makin' all the rules! aint no punks tellin' ME where to meet....we be tellin' THEM!:bigpimp:
well i guess it would have to be a 240/180/silvia club....or S13/S14 and wannabe S15's lol
ah skrew it silvias only!!!!! ok if you got a JDM motor your in too but ya'll other punks can find your own club!:whipped:


Calm down ice cube, this thread is da club.. Beetch. lol
We'll see how things go.

[240droptop]

Originally posted by TypeS
BTW is that guy who crashed on deerfoot still parting out his blue silvia? [/B]

YeAH the guy who crashed his blue silvia is still parting out. Theres not much left to it but if your interested pm and I can help you get in contact with him.

:thumbsup:

[86max]

Originally posted by 240droptop


YeAH the guy who crashed his blue silvia is still parting out. Theres not much left to it but if your interested pm and I can help you get in contact with him.

:thumbsup:

sweetness...pm'd

[Lo)2enz0]

I keep my cups in the arm rest, than they tip over and make a BIG mess.
I guys, I am laurier. I drive a car called a 240sx.
I think its fast but I wouldn’t know since the turbo disconnected from the manifold.
Can’t wait for summer, te he he he

[jdmsource]

Originally posted by Lo)2enz0
I keep my cups in the arm rest, than they tip over and make a BIG mess.
I guys, I am laurier. I drive a car called a 240sx.
I think its fast but I wouldn’t know since the turbo disconnected from the manifold.
Can’t wait for summer, te he he he
laurier make another gasket and you will be fast again for a couple of seconds:D just buggin ya man:tongue:

[86max]

Originally posted by jdmsource

laurier make another gasket and you will be fast again for a couple of seconds:D just buggin ya man:tongue:

yeah man......don't use paper this time:rofl:

[TypeS]

oh what a horror it would be to pop the hood and see it all duct-taped together:rofl:

[finboy]

Originally posted by 86max
That's what sedans are for ;)



:werd:

i have 4 cup holders :D

[DJ Lazy]

Originally posted by finboy


:werd:

i have 4 cup holders :D

Makes up for the 0 cupholders in my Lude... :rofl:

[habsfan]

bah, who needs cupholders. the truly elite can steer and shift with the same hand! :thumbsup:
















but i have cupholders, so i use em :D

[86max]

Originally posted by finboy


:werd:

i have 4 cup holders :D

Remind me to put them to use next time I'm your car........pshhhhhhh.......oh wait, thats not the bov, it's my drink spilling everywhere!:D

Aint no beverage/food consumption goin on in my whip uh uh *chicken head*

[SpoonEK9@STRD]

nice, but kouki tails and zenki front... :(

[86max]

Originally posted by SpoonEK9
nice, but kouki tails and zenki front... :(

Don't worry, the kouki 180sx bumper is on the list, well the gp sports replica anyway. With sides and rear of course. Car should be all dressed up by spring, I just wanted the mechanical stuff out of the way first. To fawking cold outside to be doing that shit.

[finboy]

Originally posted by 86max
Heres a couple shots....

Decided to go with a Tanabe tun-303 and custom 3" piping w/o a cat...rather than a pre-fab system. Sounded awesome with the silencer in, have since removed it.

so when are we going off-road in that 4X4 :D :rofl:

[statick]

spoonEK9...please post pics of ur s13:thumbsup:

[Lo)2enz0]

Originally posted by jdmsource

laurier make another gasket and you will be fast again for a couple of seconds:D just buggin ya man:tongue:

te he he he, we will see.


Originally posted by 86max


yeah man......don't use paper this time:rofl:

hey, it wasn't paper, close but next time I won't trust anyone at crappy tire.

here are a few pic's of my sileighty, now its lowered and the alloys are black.

http://northwestnissans.com/photopost/data/504/1021666-med.jpg
http://northwestnissans.com/photopost/data/504/1021222.jpg

[Team_Mclaren]

dude why not post some pics of the right side? haha
and you got the skirts yet or what? :D

[kevie88]

Here's some spy shots of my '40

http://www.members.shaw.ca/kevie88/Kevins/P1010093.JPG

http://www.members.shaw.ca/kevie88/Kevins/big.jpg

Stupid snow.. I miss driving it :(

[86max]

Originally posted by finboy


so when are we going off-road in that 4X4 :D :rofl:

fucker

It sits just at the right height to take the heads off those gophers that stand up in the middle of the road. Any lower and my intercooler would be a big mess:barf:

Kevie88

car = :bigpimp:
bronco in background = :bigpimp:

Those bronze 5zigens look really nice on white:drool:

[Lo)2enz0]

Andy, you and your bronco’s…….
Vince that front bumper is gone, well I am selling it for like $50 and yes side skirts soon, as Christmas, I just need to sell these dame potenza’s.

[86max]

Laurier, do you have a pic with the coilovers on?

PS Broncos are the sweetness

[Lo)2enz0]

I still need to take some winter pictures of what’s happening
You could see the brembo slotted rotors with the coils, te he he he

[finboy]

Originally posted by kevie88
Here's some spy shots of my '40

http://www.members.shaw.ca/kevie88/Kevins/P1010093.JPG

http://www.members.shaw.ca/kevie88/Kevins/big.jpg

Stupid snow.. I miss driving it :(

teh hotness :drool:

get the new turbo on it yet?

[habsfan]

kevie88, car looks hot! bronze wheels on white 240 :thumbsup:

[SpoonEK9@STRD]

Nice kevie! I saw you driving it not to long ago...few weeks, maybe.. i was surprised to see you still had your wheels on it.

[kirberman]

Heres a question, is the black roof like on kevies s13 come like that from the factory? My buddy told me it is but mine doesn't and I see so little of them like that.

[vietdood]

cool sleepy eye mod 86max :thumbsup:
where did you mount your switch for that?

[crazydave]

you dont need a switch for the sleepy eyes. just gotta cut a wire from that is on the origonal switch,its the hold wire, i forget what one i cut cuz iv did so long ago. sure beats buying the kits for the same looks for free:D :thumbsup:

[statick]

nice car kevie88:thumbsup:

[86max]

Originally posted by kirberman
Heres a question, is the black roof like on kevies s13 come like that from the factory? My buddy told me it is but mine doesn't and I see so little of them like that.

It's been painted black. I was planning on doing the same thing.



Originally posted by vietdood
cool sleepy eye mod 86max :thumbsup:
where did you mount your switch for that?

The switch is just under the dashboard.....just spliced into one of the wires contolling the popups.

[Boost Infested]

you want low lol Mr. Hung Low

http://members.shaw.ca/Boost-c/fmic/a0018.JPG

sofa king ugly... i cant wait to put my GramLights on and lower it some more.
http://members.shaw.ca/Boost-e/2004_08_30/a0001.JPG

[kevie88]

Originally posted by finboy


teh hotness :drool:

get the new turbo on it yet?

No new turbo installed yet, I need to get a wastegate!! If you guys know of any good deals out there for external wastegates (new or used) let me know!




Originally posted by SpoonEK9
Nice kevie! I saw you driving it not to long ago...few weeks, maybe.. i was surprised to see you still had your wheels on it.

Heh.. I don't have any other wheels right now. I could use a set of the later spoke-style 15" stock rims if you know of any of those for sale!

[Zephyr]

sleepy eye: pop out switch, cut the brown wire, and ur done!

man kevie your car is teh sexXxorz!

[ninjak84]

Originally posted by kevie88
Heh.. I don't have any other wheels right now. I could use a set of the later spoke-style 15" stock rims if you know of any of those for sale!

I actually have a set of these that I'd like to part with.
They have brand new winter rubber on them, with only 2 months use.

Let me know if you're interested.

[Jason Lange]

Here is my 300zx (z31). I am doing the same thing but all around. I am also stitch welding all the seams and it will be painted black with a custom roll cage. My motor is also being built right now with a blitz built ct-26. I am going to be running a .040 over bore vg33. So about 3.4 litres with 20 psi. Should rip I lost over a hundred pounds for sure on this "mod".

[Jason Lange]

Inside.

[Jason Lange]

stitched.

[Jason Lange]

Sorry I was looking at the first page and saw people chipping their crap out, forgot this was the s13 only thread and posted my car. Maybe move it to the proper section like general or rides or something