View Full Version : 91 civic b16a swap have a ???? to ask
comptech
12-13-2004, 11:27 AM
hey fellas i am doning a jdm b16a in my 91 honda civic hatchback and i am pretty much done with it. but i need to know what axles fit my car? i heard that 91 integra fit and then 94 del sol fit so i dont know i need your guys help on this one.
ls/vtec-crx
12-13-2004, 01:44 PM
what intermediate shaft do you have? and is it the b16 integra or b16 civic/crx? this will determine the intermediate shaft that you have which and will determine which axle you will need for the driver side 86-89 integra axle or 90-93 integra axle. also which mounts did you use?
comptech
12-14-2004, 04:07 PM
well i really dont know what inter shaft i have it came with the motor but it says on it sr3 jo
comptech
12-14-2004, 04:07 PM
o and i used hassport mounts
ls/vtec-crx
12-15-2004, 11:29 AM
Originally posted by comptech
o and i used hassport mounts
you will definately need a 90-93 integra non-abs for the passenger side and either a 86-89 integra or 90-93 integra for the driver side. try the 90-93 integra for the driver side and if it's too long then use the 86-89 integra. the 90-93 integra passenger will fit like a glove.
allan
makmadison
12-30-2004, 08:03 AM
If he uses the axles you suggest, does that mean he doesn't need the intermediate shaft?
ls/vtec-crx
12-30-2004, 10:35 AM
Originally posted by makmadison
If he uses the axles you suggest, does that mean he doesn't need the intermediate shaft?
he still needs an intermediate shaft no matter what.....
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.