PDA

View Full Version : FS: Integra B18 Engine


egmike
12-09-2002, 11:16 PM
Well i was gonna rebulid and put in my EG Hatch and Boost it :D But decided not too cause of a few factors

97 Integra B18B1 LS Engine
Runs but has spun a bearing, it is noisy till it warms up and noise goes away
Good for rebuild project
Engine is pretty much complete, missing a few things like distributer/Flywheel, has all sensors
Also has Harness still on engine and is not cut/damaged at all.
Physically looks mint

I will take some Pics tommorrow and post em.

I am open to offers or trades or both :)

Pm if Interested

SOLD!!
CRXguy
12-09-2002, 11:33 PM
:drool:
buh_buh
12-09-2002, 11:46 PM
pm him crxguy.
how much u looking to get for it?
B18C
12-10-2002, 12:12 AM
Originally posted by MR8
...Runs but has spun a bearing, it is noisy till it warms up and noise goes away...


Huh? Can you even drive with a spun bearing? To spin a bearing doesn't the bearing seize to the crank? Won't you kill your crank after having a bearing seize?
egmike
12-10-2002, 12:30 AM
Originally posted by B18C


Huh? Can you even drive with a spun bearing? To spin a bearing doesn't the bearing seize to the crank? Won't you kill your crank after having a bearing seize?

??? Not a mechanic maybe someone can answer this.....

I know that the guy was driving the car until he swaped in the new engine, he said that it knocked a bit but i didn't actually hear it running.
I'd would definitely suggest a rebuild for this engine to bring it back up to par.
jdmakkord
12-10-2002, 08:45 AM
a spun bearing is when the bearing becomes scored from overheating or lack of oil. This causes play between the crank and the crank bearings, causing it to knock.
legendboy
12-10-2002, 09:03 AM
And it needs to be fixed before too much damage is done. Mike, any chance you have the whole swap? Tranny?
egmike
12-10-2002, 10:57 AM
No don't have the tranny, I wish cause it would go in my car :) All I have in just the engine and the wiring harness that is on the engine.
egmike
12-15-2002, 06:55 PM
http://www3.telus.net/turbofreak/Picture 3.jpg

http://www3.telus.net/turbofreak/Picture 5.jpg

http://www3.telus.net/turbofreak/Picture 6.jpg

http://www3.telus.net/turbofreak/Picture 7.jpg
egmike
12-19-2002, 12:11 AM
Spoke to the Mechanic who took this engine out, he said that they crank journals from the spun bearing should have no wear/damage on them so the crank should not have to be replaced , just the bearings ...... if anyone cares :dunno:
Sykes
12-20-2002, 11:43 AM
What are you willing to let it go for?
Check your PM
jdmakkord
12-20-2002, 12:24 PM
work case, you might have to machine the crank. Nothing too serious.
egmike
12-20-2002, 02:06 PM
Originally posted by Sykes
What are you willing to let it go for?
Check your PM

Check your PM's