My broken MX-6

[squirrel_boy]

Hey everyone. Im just starting to gain a large intrest in cars. It seems though, sadly my car is broken? Today, i started my car, and it died 4 secs after. I turned it on again, it worked, and i drove away. Later that day, it did it again! Im worried now.
As well, my cluch make a squeaking sound and doesnt always come out fully when i let go, its not in, but it just doesnt wanna come all the way out, unless i pull it back with my foot from the back of the pedal.
Does anyone know what the two problems are?
Thanks in advance!

Nelson

[dankish1]

is ur clutch hydrolic or is it a cabel

[squirrel_boy]

its hydrolic

[evo916]

try going under your dash and spraying your clutch linkage bolts with white grease or possibly wd40 it worked for my car

[squirrel_boy]

that seems like good advice, but i dunno if thats the problem. I wanna whats the problem first before i try to fix it

[QuasarCav]

Is your slave cylinder full of fluid?

Sounds like something has gone awry in your hydro system.

[Millsie]

The clutch is hydralic which is vacuum assisted, just like the brakes. It sounds like you may have a vacuum leak somewhere since the car is also dieing. Is it stumbling at idle or did it just cut out immediately? How are the brakes, if there is a vacuum problem with the clutch, the brakes should feel quite mushy too, since they run of the same system. Test the vacuum system for a leak and check for weak brakes, that should be your first area of concern.

[squirrel_boy]

good advice, my breaks arnt the greatest at the moment either. Im gonna good check that

[hondatoy]

i am parting out a 93-97 mazda MX-6 for parts if u need anything pm me, motor, tranny, leater seats, glass, doors? anything let me know thanks