RedHotGolf
01-14-2005, 06:33 AM
Ok here are my specs, currently the subs are in series, in a sealed box.
wondering what kind of settings would optimise my bass without blowing the crap out of my factory speakers? IE Gain, Bass from HU and such... any imput will be much apreciated, and yea i know im underpowering my subs, but its plenty power for em now. :nut:
HeadUnit - Clarion Proaudio DXZ745MP
# Dual 24-bit DACs
# 2-Band Parametric EQ (Z Enhancer Plus)
# Subwoofer Volume Control
# Built-In Low-Pass Crossovers (off/50Hz /80Hz/120Hz)
# 4-Volt / 6-Channel Gold-Plated RCA Line Level Output
# 2 Zone Control With Dedicated RCA Line Level Outputs
# Magna Bass EX
# ADF
# 2-Channel Aux. Input
# Adjustable Display Contrast
# IR Remote Control
# 212-Watt (53W x 4)
Amplifier - Clarion DPX 1001.1
# Maximum Power - 1000w
# continuous Power - 250x2
# THD @Rated Output (%) <.05%
# Sound to Noise ratio (A wtg) >95dB
# Frequency response (+/-1dB) 10Hz-50kHz
# Line Level Input Sensitivity 200mV to 8V
# Speaker Level input sensitivity 400mV to 16V
# Input Impedence - Low level 12k Ohms
High Level 395 Ohms
# Output impedence 1Ohms Strereo
2Ohms Bridged
SUBS AudioPipe TXX-OD10
# max power 1000w
# Rated power 500w
# Impedance 2x4 Ohms
# Sensitivity 86 dB/w/m
# Frequency Response 20 Hz-1k Hz
wondering what kind of settings would optimise my bass without blowing the crap out of my factory speakers? IE Gain, Bass from HU and such... any imput will be much apreciated, and yea i know im underpowering my subs, but its plenty power for em now. :nut:
HeadUnit - Clarion Proaudio DXZ745MP
# Dual 24-bit DACs
# 2-Band Parametric EQ (Z Enhancer Plus)
# Subwoofer Volume Control
# Built-In Low-Pass Crossovers (off/50Hz /80Hz/120Hz)
# 4-Volt / 6-Channel Gold-Plated RCA Line Level Output
# 2 Zone Control With Dedicated RCA Line Level Outputs
# Magna Bass EX
# ADF
# 2-Channel Aux. Input
# Adjustable Display Contrast
# IR Remote Control
# 212-Watt (53W x 4)
Amplifier - Clarion DPX 1001.1
# Maximum Power - 1000w
# continuous Power - 250x2
# THD @Rated Output (%) <.05%
# Sound to Noise ratio (A wtg) >95dB
# Frequency response (+/-1dB) 10Hz-50kHz
# Line Level Input Sensitivity 200mV to 8V
# Speaker Level input sensitivity 400mV to 16V
# Input Impedence - Low level 12k Ohms
High Level 395 Ohms
# Output impedence 1Ohms Strereo
2Ohms Bridged
SUBS AudioPipe TXX-OD10
# max power 1000w
# Rated power 500w
# Impedance 2x4 Ohms
# Sensitivity 86 dB/w/m
# Frequency Response 20 Hz-1k Hz