PDA

View Full Version : FS: 1989 Nissan 240sx



project240
01-21-2005, 05:24 PM
Hey Guys,

I've got a 1989 Nissan 240sx. I bought this as a project car a few months back and just haven't had time to work on it. By no means am I desperate to sell, but it's not doing me much good right now sitting outside. The car is completely stock.

Red in Colour, approx 175kms
5 speed
Interior is in good condition, normal wear on driver's seat
Clean Engine, Fresh Oil, Rad Flush, Replaced Fuel & Air Filters, Newer Tires
Car is mechanically sound

THE BAD:

The car does have some rust on the side skirts and rear quarters. I'll try get some better pictures of the rust spots. Problem with passenger side windshield wiper, not exactly sure what it is, I think the bolt came undone, doesn't work properly right now. Also, passenger side door needs a new handle... Car has some minor body damage (driver headlight, front pass fender).

The car is located in Saskatchewan, might be willing to deliver to Calgary pending weather and deposit. Feel free to PM me any questions you have.

Asking $2300obo

project240

project240
01-21-2005, 05:25 PM
Another pic

project240
01-21-2005, 05:27 PM
another

project240
01-21-2005, 05:27 PM
one more

icydude666
01-21-2005, 05:36 PM
Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

ade99
01-21-2005, 06:54 PM
Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

maxdaddy
01-21-2005, 07:31 PM
hows the paint?

project240
01-21-2005, 10:52 PM
Thanks for the comments guys.


Originally posted by maxdaddy
hows the paint?


Average for it's age.

Skylinelover
01-21-2005, 11:10 PM
Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

project240
01-22-2005, 09:41 AM
To Everyone who PM'd Me:

I've replied to all Pms.

I'll try to get a few more pictures posted up today.

Thanks

project240
01-23-2005, 03:18 PM
bump

schurchill39
01-23-2005, 04:01 PM
PM sent

kelly
01-23-2005, 10:39 PM
PM 'd

project240
01-24-2005, 08:05 AM
All Pm's have been replied to again.

project240
01-24-2005, 05:56 PM
A few people have asked for more pics of the rust, etc... I've taken a few more pictures, but they are too big to post on here, so please pm me with your email address and I'll send them to you. Thanks

TryK
01-24-2005, 06:55 PM
Is the car sask certified? And where in sask are you. I am in Saskatoon and a friend is looking into getting a 240. Thanks!

project240
01-24-2005, 09:16 PM
All PMs returned again.

BuMp

project240
01-25-2005, 07:53 AM
Will deliver at buyer's expense.

project240
01-27-2005, 10:14 PM
ttt

DrifterXT
02-01-2005, 05:19 PM
Will it pass an out of province inspection???

project240
02-01-2005, 07:58 PM
Originally posted by DrifterXT
Will it pass an out of province inspection???


It definitely should. Saskatchewan's safety inspection are much more complete than Alberta's are. It might need a few minor things, nothing that I know of, but I'm sure it'll pass without problems.

Thanks

schurchill39
02-02-2005, 01:27 PM
What do you mean you will ship at the buyers expense? Are you planning to actually ship it on a flat bed or drive it up and bus it home?

Pictures of rust would help if you get a cahnce.

project240
02-02-2005, 02:58 PM
Originally posted by schurchill39
What do you mean you will ship at the buyers expense? Are you planning to actually ship it on a flat bed or drive it up and bus it home?

Pictures of rust would help if you get a cahnce.


There are several companies which make trips from here to Calgary... cost is roughly $330 for a flatbed ride to Calgary. I may also be willing to drive it myself...

I think I've already emailed you pictures of the rust... pm me your email if I haven't done so yet

DrifterXT
02-03-2005, 11:28 AM
Is n e thing in there powered... like windows???

hollywood_35
02-03-2005, 06:01 PM
Can the rust just be buffed out with an sander, or does it have to be cut and have a patch welded in?

project240
02-04-2005, 07:27 AM
Originally posted by DrifterXT
Is n e thing in there powered... like windows???


Power Windows, Locks, Steering, Mirrors, a/t/c, AC, sunroof

project240
02-04-2005, 07:28 AM
Originally posted by hollywood_35
Can the rust just be buffed out with an sander,


Most of it definitely could be

arabian_ryda
02-04-2005, 01:53 PM
could you pm me some interior shots and some of where the rust is and also some pics of the wheel wells. thanx

project240
02-04-2005, 05:35 PM
Originally posted by arabian_ryda
could you pm me some interior shots and some of where the rust is and also some pics of the wheel wells. thanx


I'll try to get some posted tomorrow.

project240
02-08-2005, 08:36 AM
more pics coming tonight

mrchit
02-10-2005, 01:39 AM
ok good

project240
02-10-2005, 02:07 PM
Can anyone host pictures for me?? I've taken a few mor shots, but they're all too big to post. Please pm me if you can or can recommend somewhere. Thanks

shifted
02-11-2005, 12:14 AM
photobucket.com

shutterfly.com

with shutterfly you can even resize the images

project240
02-11-2005, 08:18 AM
http://img.photobucket.com/albums/v707/project240/Im003293.jpg
Interior View

http://img.photobucket.com/albums/v707/project240/Im003294.jpg
Driver's Seat

http://img.photobucket.com/albums/v707/project240/Im003295.jpg
Gauge Cluster

http://img.photobucket.com/albums/v707/project240/Im003296.jpg
Engine

http://img.photobucket.com/albums/v707/project240/Im003216.jpg
Driver's Side Rear Fender

http://img.photobucket.com/albums/v707/project240/Im003217.jpg
Passenger Side Skirt

http://img.photobucket.com/albums/v707/project240/Im003218.jpg
Driver Side Headlight

http://img.photobucket.com/albums/v707/project240/Im003219.jpg
Driver Side Headlight

project240
02-11-2005, 08:23 AM
Well, Hopefully all my pictures work. Thanks shifted

icydude666
02-11-2005, 11:31 AM
so its still for sale?

project240
02-11-2005, 11:36 AM
Originally posted by icydude666
so its still for sale?


Yes

schurchill39
02-11-2005, 12:31 PM
Wow thats in better condition then I thought. I will reconsider

project240
02-13-2005, 09:31 PM
Bump

New Price $2400 delivered

kelly
02-13-2005, 10:26 PM
surprised you haven't sold your car yet i wanted to buy it but my parents said not right now cause i don't have all the money but if it is still around in the spring i can buy it!

mazda_maniac
02-15-2005, 09:34 PM
Hey man. just wondering if you still have this car forsale and where your located. ??

Thanks

project240
02-15-2005, 10:35 PM
Hasn't sold yet.... but it will soon....

mazda_maniac
02-16-2005, 01:12 AM
Hey, Just wondering if its still for sale.. I emailed you. If so please email me @ [email protected] in regaurds to a contact # to discuss purchase ASAP...

Thanks Mike

project240
02-16-2005, 06:46 AM
Originally posted by mazda_maniac
Hey, Just wondering if its still for sale.. I emailed you. If so please email me @ [email protected] in regaurds to a contact # to discuss purchase ASAP...

Thanks Mike


You've got PM

project240
02-17-2005, 04:35 PM
bump

DrifterXT
02-17-2005, 06:28 PM
if you can make sure it passes inspection over there in SK and then ship it over i am willing to pay 2400+ inspection fee on the table. and maybe u can text msg me your phone number so i can give you a shout. reach me at 403-689-4454...just one last question how is the body frame as in the bottom, is it rusted or anything?

project240
02-18-2005, 07:39 AM
Originally posted by DrifterXT
if you can make sure it passes inspection over there in SK and then ship it over i am willing to pay 2400+ inspection fee on the table. and maybe u can text msg me your phone number so i can give you a shout. reach me at 403-689-4454...just one last question how is the body frame as in the bottom, is it rusted or anything?


2 buyers coming this weekend... i'll pm you monday if it doesn't sell

Intensity
02-18-2005, 05:48 PM
you should post up a pic of the front
looks like theres some scuffs

Eternal89
11-05-2005, 11:42 AM
is car still for sale pm please

schurchill39
11-05-2005, 05:32 PM
Yea dude chances are it wont be for sale 9 months later... Please look at the date of the thread before posting

mike_papps
11-05-2005, 07:28 PM
car shouldnt be back up forslae.. frame has terrible rust.. couldnt even put it up on hoist without cracking and sounded like it was gonna break.... not recomended unless you want the engine and tranny and few body stuff.... otherwise cars in ok shape..

Eternal89
12-01-2005, 05:27 PM
yo i will take for 2000$ or so pm me plz im interested

schurchill39
12-01-2005, 11:27 PM
Dude what dont you get.... This thread is almost a year old. Chances are it wont still be around

asianflip16
12-07-2005, 09:55 PM
nice nice ride
good price
is it still for sale???