PDA

View Full Version : Car Lowering and exhaust



IronMan
05-01-2005, 11:34 PM
Anyone know what the lowest price for a good exhaust is? And I also wanna know how much money it takes to have your car lowered. BTW: I need a Canadian price.

Thx,
-IronMan :burnout:

^SkylinE^
05-01-2005, 11:46 PM
lowering springs 150$ - 2000$
you can do it for about 250$

exhuast it all depends on what you want. Full cat back 500$ - 2000$

Just the muffler 100-300$:dunno:

civic_ek4
05-01-2005, 11:52 PM
H&R springs for a Matrix is about $205 and the labor should be $50 a corner so you will be looking at less than $500. BUT lowering springs is so easy to do yourself so you might as well save yourself the $200.

pimpstang
05-02-2005, 12:07 AM
lol im tryin to do the same anyone know a place in calgary? to buy these things?

IronMan
05-02-2005, 06:19 PM
Well, for the muffler, as long as it goes VROOM VROOM, lol.

IronMan
05-02-2005, 06:20 PM
I mean the good "bass" sound from the Exhaust.

AG_Styles
05-03-2005, 04:53 PM
around 150-500 for a muffler. mine cost 100, and it sounds raspy as hell, but i don't care since i've got a striaght pipe from the engine back.

if u lower, u gonna replace ur shocks or not?
for me, with camber kit, springs and shocks, cost me 1200 and then u gotta include labour in there. and finally alignment.

in essence, you're gonna get what you pay for.

Audio_Rookie
05-03-2005, 05:30 PM
Exhaust, making a customer 2.5" mandrel bent on my car, total came to 220$ with muffler and I had to use 2 SS mandrle bends as thats all the had for mandrils.....so those mandrils were over 100$

Exhausts are expensive as hell if you get a kit, like 700-800$ plus labour.
Good muffler can cost you from 45$-250$ depending where you look.

I got a nice 2.5" dynomax ultraflow muffler from minute muffler for 45$ cause it was 30% off, and it sounds awsome.

Lowering springs, can usually get a set for 400-500$ and install yourself easily.

HiSpec
05-03-2005, 09:04 PM
who is willing to tackle a lowering job for my vehicle? I'll pay you of course.

IronMan
05-04-2005, 08:18 PM
APC 156026 Muffler Race Style Muffler 4.5" - SINGLE EXHAUST Round Muffler, 4.5" Single Angle Cut Tip, Stainless Steel

Here's the muffler (http://electronics.comparesite.com/shop/get_cat_under-the-hood-exhaust-and-emissions-muffler-all-makes-all-models-apc.htm)
It's at the very bottom:banghead:

IronMan
05-15-2005, 05:20 PM
BUMP