PDA

View Full Version : 89 Mustang Turbo coupe



cobra347
06-24-2005, 07:25 PM
1/4 mile time as of Aug 25th 06 first pass 11.64 at 122

Oct 7th 2006 11.40 @ 119

2.3 SOHC,ported/polished head, ported lower,custom upper. Custom large throttle body. 4" dp and 3" Ultra flow

Holset T3 HY-35 with large FMIC 3.5 core.

C-4 auto 2500 stall, 3.73 gears, line lock and LakeWood LCAs
alum drive shaft and loop

Progressive Alky Injection

a few vids of my 2 cars http://www.savefile.com/projects/506888
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_424_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_327_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_96_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_94_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_79_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_82_full.jpg

cobra347
07-09-2005, 12:32 PM
July 8th 13.21 vid.

http://www.putfile.com/media.php?n=RaceCity

cobra347
11-19-2005, 04:51 PM
06 is going to be fun with the Holset!

I am going with a home made log center mount.

I hope to fit the HY just as it comes no messing around, move the Turbo ahead so the stock exhaust elbow out the back fits nice with the car.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_102_full.jpg

I think a center mount log may help spool but who knows its all about a nice fit. I plan to leave the compressor outlet pointing down and foward to the FMIC, maybe go under the sway bar mount to keep it open and clean looking.

Here i made up some flanges and few extras for a few friends. Now to get some 1 1/4 elbows get going :)

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_101_full.jpg

The front shot looks good.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_100_full.jpg

Here is the start of the FMIC i also plan to build a SS foward facing upper intake with 3" and 3.8 SC TB.(thanks Tom)

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_103_full.jpg





Steve

cobra347
12-10-2005, 03:42 PM
Another nice day to work on the car

So i pulled the bumper and cover today fun fun fun!

Takes an hour, not bad. This is temp bungy cord fit :)

looks like a perfect fit.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_118_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_112_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_113_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_114_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_107_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_115_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_121_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_124_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_116_full.jpg

So far so good, nothing had to be cut or trimmed.

cobra347
12-27-2005, 12:07 AM
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_132_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_136_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_157_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_156_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_159_full.jpg

cobra347
12-27-2005, 06:57 PM
More time spent today on makin it pretty. :D

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_162_full.jpg


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_164_full.jpg


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_167_full.jpg


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_166_full.jpg

last thing to check is port match and Tig the flange back on. :2thumbs:

cobra347
01-05-2006, 10:49 PM
Here is the build of my custom upper intake.

Make a base flange with a perfect fit to the lower knife edged intake.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_168_full.jpg

Cut some corner pieces to fit the odd shape.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_169_full.jpg

Add 3" pipe and mark where to cut.
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_170_full.jpg


Weld up the pieces.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_173_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_174_full.jpg

Weld it up on the flange. The throttle body is a stock 5 litre.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_175_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_177_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_176_full.jpg

Next mock up some stainless steel bends for hood clearance and angle. tape works good for test fitting.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_182_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_183_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_184_full.jpg

The throttle body flange will be put on next and add a throttle cable bracket with a 3/8s nipple for the vacuum tree.

Then start the fab/fit of the 4" down pipe. Freebie from a good friend. :arco:

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_171_full.jpg

And this 4" chrome pipe ( 1 bend only) will be part of the turbo cold air intake with a K&N on the end. Freebie again :2thumbs:

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_172_full.jpg

cobra347
01-07-2006, 12:06 AM
What it looks like, So far So good!

Simply bad ass a 4" cold air intake pipe!

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_186_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_196_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_188_full.jpg

Hard to see but thats the 4" down pipe it will have.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_193_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_197_full.jpg

I sure like the header bolts i found, From new VWs, they are from the CV axels they hold axel to trans flange.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_198_full.jpg

A little header wrench (was a 10mm) i made with a allen welded on the one end and still a 10mm open on the other.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_204_full.jpg

cobra347
01-11-2006, 09:22 PM
Intake is looking good.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_212_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_211_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_209_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_208_full.jpg

cobra347
01-12-2006, 10:40 PM
Ahh yes its pretty much done :)

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_214_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_215_full.jpg

the pipe is to long but ya get the idea

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_217_full.jpg
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_218_full.jpg

the yellow transition hose is temporary lol

cobra347
01-17-2006, 09:20 PM
I made these end pieces for my charge pipes.

My throttle body and VAM are 3" OD and inside the TB is 2.5 ID and the charge pipe are 2.5"

The cost of transition hoses are gay.

So i whipped up the adapters to weld on the ends.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_220_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_219_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_223_full.jpg

Silicone 3" ID hose and T bolt clamps i picked up.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_221_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_226_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_228_full.jpg

cobra347
01-20-2006, 09:10 PM
Finished upper intake all vacuum nipples done and throttle cable mount done.

And a peek at my charge pipe that sits at the inlet for the throttle body with alky and nos nozzles.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_235_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_234_full.jpg

cobra347
01-21-2006, 03:10 PM
4" down pipe

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_248_full.jpg

Alky nozzle.
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_243_full.jpg

N2O nozzle

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_253_full.jpg

PCV with check valve

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_254_full.jpg

Throttle cable mounted

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_241_full.jpg

Nice full engine pic

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_246_full.jpg

The cam

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_250_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_251_full.jpg

Full pic of the IC pipe

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_255_full.jpg

cobra347
02-12-2006, 08:13 PM
Car is all apart to do some media blasting and get it painted.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_285_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_282_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_283_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_280_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_281_full.jpg

I decided to remove all the heavy crap under the carpit, what a ton shit that is under there.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_292_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_293_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_286_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_287_full.jpg

Gave the carpit a good cleaning looks like new again.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_299_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_298_full.jpg


A few pics of the M&T out of the car.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_297_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_295_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_279_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_278_full.jpg

cobra347
03-21-2006, 10:02 PM
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_309_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_308_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_307_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_306_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_304_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_303_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_314_full.jpg

cobra347
05-01-2006, 08:15 PM
Well i let the motor collect dust till last week.

from this

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_306_full.jpg

to this in a day or two

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_327_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_321_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_328_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_329_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_330_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_326_full.jpg


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_319_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_324_full.jpg

The lucky guy in the booth got to spend all afternoon and then some more time spraying the car.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_323_full.jpg

At 5 PM i could only sneak this so so pic of the paint

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_322_full.jpg

cobra347
05-04-2006, 07:51 PM
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_345_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_346_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_347_full.jpg

cobra347
05-06-2006, 06:07 PM
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_349_full.jpg


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_348_full.jpg



http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_358_full.jpg



http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_351_full.jpg



Fack does it ever yank the wheels like this.


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_353_full.jpg

cobra347
05-13-2006, 06:40 PM
http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_372_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_374_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_375_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_379_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_381_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_382_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_384_full.jpg

Turbo is super loud :D spools really easy. Cant wait till the car gets on Toma's dyno. hope to get a few vids.

cobra347
05-20-2006, 04:24 PM
Alky nozzle location.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_386_full.jpg

Alky filter and back of pump on frame rail.


http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_395_full.jpg

3 BAR MAP

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_388_full.jpg

Alky controller on dash

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_390_full.jpg

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_393_full.jpg

Boost gauge with 2 LEDs.
Top LED for pump action, goes red to green for spraying.

Bottom blue LED for low alky level.

http://memimage.cardomain.com/member_images/10/web/478000-478999/478078_391_full.jpg