YeTI
07-06-2005, 05:09 PM
1987 Mazda b2200 Ex cab
Import 2.0l engine rebuilt less then 2000km ago
5 speed stranded tyranny
Fringed Linces plate and role pan.
Dropped 3” in front with control arms and 4” in back with drop block springs. (Drive shaft cut and refitted for proper pinion angel. OEM Front control arm will be included)
4 runner bumper instilled
2 in frame notch (not on truck but will include)
2 hoods one normal hood and one form b2600i (needs some work)
2nd driver’s side door
Fenders form 4x4 b2600i (not on truck)
Full set of inter plastic including dash.
Set of low pro tiers (not installed but can be if wanted, Stock tiers on now)
Chrome set, Handles mirrors, tale light Fender well set.
Head light switched to h4
2nd rear glass, and side glass.
White cap installed on truck.
Set of 15” 5 spoke rims (will need tiers and buffing, one for spare little deeper dish then the rest but is nice for show)
Toyota Tacoma bumper (sticker still on stating replacement part number)
Lots of misalliances parts collected form junk yards. (To much to list but will give pic)
Truck has power steering but will include the original stranded steering box.
All wires run for stereo system. 4 gage form Battery to Back, RCA form dash to back, fuse blocks behind glove box for front lighting.
As for recipes I have $3500 form Canada Tire in Toronto. Since then I have replaced all bushings n front and front shocks. Run new brake and gas lines to the back under bed, and replaced rear shocks. (Will included old shocks for rear for OEM springs)
Brakes are still good, All front lines still good,
Now for the bad. Truck needs Paint, and some body work( vary minimal) bed will need floor fixed.
Asking $2500 cnd as is. Will drop to make Quick Sale
E-mail me at [email protected] I have lots of pic's and More info if neeeded
YeTI
Import 2.0l engine rebuilt less then 2000km ago
5 speed stranded tyranny
Fringed Linces plate and role pan.
Dropped 3” in front with control arms and 4” in back with drop block springs. (Drive shaft cut and refitted for proper pinion angel. OEM Front control arm will be included)
4 runner bumper instilled
2 in frame notch (not on truck but will include)
2 hoods one normal hood and one form b2600i (needs some work)
2nd driver’s side door
Fenders form 4x4 b2600i (not on truck)
Full set of inter plastic including dash.
Set of low pro tiers (not installed but can be if wanted, Stock tiers on now)
Chrome set, Handles mirrors, tale light Fender well set.
Head light switched to h4
2nd rear glass, and side glass.
White cap installed on truck.
Set of 15” 5 spoke rims (will need tiers and buffing, one for spare little deeper dish then the rest but is nice for show)
Toyota Tacoma bumper (sticker still on stating replacement part number)
Lots of misalliances parts collected form junk yards. (To much to list but will give pic)
Truck has power steering but will include the original stranded steering box.
All wires run for stereo system. 4 gage form Battery to Back, RCA form dash to back, fuse blocks behind glove box for front lighting.
As for recipes I have $3500 form Canada Tire in Toronto. Since then I have replaced all bushings n front and front shocks. Run new brake and gas lines to the back under bed, and replaced rear shocks. (Will included old shocks for rear for OEM springs)
Brakes are still good, All front lines still good,
Now for the bad. Truck needs Paint, and some body work( vary minimal) bed will need floor fixed.
Asking $2500 cnd as is. Will drop to make Quick Sale
E-mail me at [email protected] I have lots of pic's and More info if neeeded
YeTI