FS: Crank breather kit (Endyne style)

[freakin]

I was about to install this crank breather system on my B20-VTEC but never got the chance before I cracked it. This will fit all B-series Honda engines. Ideal for LS and B20 VTEC engines or turbo applications. All of the parts are new. $150 for everything.

Parts include:
-Modified (2 1/2" fittings welded in) Moroso baffled catchcan
-reusable filter for the top of the can
-mount for the can
-Drain
-1/2" fitting for the bottom of the can
-2 Honda plugs with 1/2" fittings that bolt in the back + washers for them
-1/2" T fitting
-Box of 10 small hose clamps.

http://www.members.shaw.ca/matteakin/forsale/crankbreatherparts.jpg

[freakin]

Bump....

FYI, the kit looks like this when installed:
http://theoldone.com/articles/badtothebone/rear_breather_tank_plumbing.jpg

[TurboMedic]

Is this a catch can?

[freakin]

If you run the drain, then yes, it's a catchcan. But if you run the lines as pictured, then it drains back to the engine. Basically the PCV systems on the LS and B20 blocks isn't good enough once they're boosted or running up to 8,000RPM. LS/VTEC and B20VTEC engines are known to blow seals if you don't run a setup like this.

[freakin]

bump....offers anyone?

[Syprix]

I want this kit :). Do you live in calgary?

[QuasarCav]

WOW