Weapon_R
08-24-2005, 10:16 PM
I have an LCD screen but I cannot find the harness for it. From what I remember, the harness had a power, ground, and RCA inputs so that i could plug in a deck/ps2/etc.
I have since cut the wire to expose 4 smaller wires within the thick black cable running from the LCD.
The thickest wire is yellow. The red and orange are about the same thickness, slightly smaller than the yellow. Then there are a bunch of loose wires that are not enclosed in rubber.
Is there any way to build a wiring harness based on this information? I have a multimeter if that'll help but I am not very adept with it :)
Here's a pic to make things clearer:
I have since cut the wire to expose 4 smaller wires within the thick black cable running from the LCD.
The thickest wire is yellow. The red and orange are about the same thickness, slightly smaller than the yellow. Then there are a bunch of loose wires that are not enclosed in rubber.
Is there any way to build a wiring harness based on this information? I have a multimeter if that'll help but I am not very adept with it :)
Here's a pic to make things clearer: