The shitty thing is if the contractor does shit prep but hires a decent finishing crew you can have what looks like a good result in the short term. I'd be asking to see jobs completed that are a few...
Type: Posts; User: gcoap
The shitty thing is if the contractor does shit prep but hires a decent finishing crew you can have what looks like a good result in the short term. I'd be asking to see jobs completed that are a few...
Rolling mix is a supplier but they also do prep place & finish as well.
https://www.homedepot.ca/product/leviton-twinlite-lamp-holder-adapter-white/1000105495
From Redit
Wards 3 and 4
Althea Adams
Incumbent
Believes there are some challenges with the draft curriculum but does not claim to be a curriculum expert herself
Najeeb Butt
I used to work for a company that does slab jacking. Poly foam should be cheaper then mud jacking plus you are dealing with smaller holes to patch in the concrete once you are done. Depending on how...
Spray foam the base after plumbing makes it so that the finishers cannot slash the poly. Or just be onsite for the pour to watch for that. It also doesn't hurt to check depths. The clean out rings...
I run into that issue quite often as I keep my phone in my pocket with the charge port up so it tends to collect lint and crap till it cannot charge. I find if you use a tooth pick you can clean it...
Check out polyboss.ca I used to work for them. They do foam slab-jacking.
The only issue I have seen with Driveway's is they can sometimes have massive voids that you don't see right away that can...
You can get different sealants with grit in them to give you traction.
The price can change a bunch based on if they are actually doing the job properly. On the cheaper quotes I would asking about depth of slab(and actually checking the prep work VS top of forms) if...
Most of the IBC's I have seen are a male 2" ish camlock fitting. shouldn't be to hard to find the parts at princess auto to step that down to 3/4" for a garden hose.
I wouldn't be shocked if some of the change house to house on the same street comes down to builder. I've pumped concrete for some of the bulk builders and some of the crews gave no fucks in...
https://www.youtube.com/watch?v=8mGBaXPlri8
Still working for a few more weeks ish.
I just took OSSA fall arrest, Standard first aid and H2S at AIP. They were the cheapest I could find.
http://www.aipsafety.com/
I think you might work with my wife as they were just told yesterday that they were done OCT 10.
I had a big evergreen removed from the front of my place by Rob's Tree removal. He was quick and left everything tidy. Plus he this was the only company I could find with an online rough quoting tool.
The test would likely be compression test and likely air entertainment. A driveway will be at 32MPA, most of the suppliers will over shoot that number so that if the finishers do over slump they will...
Given the choice of sandblast or topping I'd do a sandblast. You really should reseal the slab every few years regardless of finish.
I'd still push for a re-pour.
Also with that crack it looks...
It can depend on how much they like you. They only started charging after KLS bought them last year, it used to be free to dump. It's mostly an inconvenience fee as it can take 4 times longer for a...
Calgary aggregate will take it but last I checked they will charge $25 a load out of a pickup truck.
Try Chad with Polyboss www.polyboss.ca expect around $750 or more to fix it depending on how bad it is.
In the mean time check your drainage, some sinking issues are caused by incorrect drainage...
I have used www.amerseal.com It can be hit or miss if it works or not even on a small nail puncture. For old rubber I'm not sure it would work at all.
My buddy just got his PAL and RPAL last year. I was a reference and never got called before he got his license.
The Mars Hydro style of LED light really sucks compared to newer tech. One huge advantage of LED is the ability to spread the light sources out which the Mars Hydro style fails to do. It's also using...
Considering I've had a hail claim on a vehicle with parking insurance/Comprehensive this would be false. Comprehensive is what covers all this. All you're pulling is PLPD which covers others that you...
Sandblasting is likely around $1.00 per sqft. Removal and replacement your looking closer to $14.00 per sqft. It's surprising they are even offering it. I'm not a big fan of blasting a driveway that...
That looks sandy as hell. Go look at a good exposed concrete slab and you will see the difference.
Exposed is usually slippery due to sealer without grit. Cracks are just as obvious with an...
This is often done to deal with a bad finishing job. I would lean towards the replacement option if they are offering it. Concrete that is intended to be exposed has a higher aggregate content then a...
Look at Hardrock, Unicon, or Dunrite. All are Companies that sell to professionals
It really depends on why its pooling. Is this a new pad the was placed poorly causing a bird bath? If so you can add material but it can look a little off.
If the slab has sunk or heaved creating a...
That looks like they might have run short on concrete and left a dip. Pretty easy to check if you run a string line from the front wall to front of the slab.
There are two ways to lift concrete. Mud jacking and Poly jacking. Poly Jacking is done with polyurethane foam injected via 5/8" holes weight is between 2-4lb per cuft of foam. Mud jacking is done...
The brakes are usually setup in a series so if its open on one brake none of them work. I would check adjustment on the other three. I set them so that with the wheel off the ground you get some...
http://www.concreteimpressionsinc.ca/ or http://www.calgaryconcrete.com/index.html
I've had pretty good luck bedding brakes in by manually applying the brakes and driving around the block like that. Let them cool off then adjust.
Federal metals will take car parts. Anything with fluid they require pan or cover to be removed. You won't get much but it's better then paying at the dump. I dropped off 4 struts with springs a full...
We are selling our house looking for a bigger place. Perfect house for car lover's. You can work on cars outback and still park a car inside.
...
Talk with Greg West from Cornel's world. He has a CNC cutter. www.cornelsworld.com
Freehold http://mobile.calgaryconcrete.com
Or
Concrete impressions. http://www.concreteimpressionsinc.ca
Both have a ton of experience with stamped.