Any recommendations for pop up shade structures that are big enough to cover a picnic table?
Type: Posts; User: cycosis
Any recommendations for pop up shade structures that are big enough to cover a picnic table?
Hate to say it but theres something going on with your seat. Im very familiar with the platform and that harness should be flowing very easily.
One thing I found happened somewhat often was that...
What do you not like about your britax convertible? Is it a clicktight (white plastic hull) or the classic style (Black plastic hull)? I sold thousands of those things
Id recommend the britax grow...
Just wanting to offer some clarity here on convertible seats and combo harness/booster seats.
Most convertible seats go to either 65lbs or 49". Thats a big kid, hence why they are wider than...
Yes
Ever seen Death to Smoochy?
I believe they have secured the rights to his voice and he has pre recorded a ton of words so they can use Vader's voice indefinitely.
Obiwan was great!
If going vinyl, go with the stone core. Its not nearly as soft.
I never needed an international license and I rented a BMW for 3 weeks 5 years ago no issues through SIXT.
So... even though inflation is eating value, Im guessing I should hold off for a bit longer to see how far she drops before buying?
I called up my bank back in February as my renewal was this coming July 1st. Was ending a 5 year fixed at 2.59%. Asked if they would consider an early renewal with no penalty. They offered me a new 5...
Lot more done this weekend electrical wise. Got all the 120V run and tested. Inverter is not hooked up yet to the battery bank but its mounted in the electrical centre. Also got the power centre...
Grey tank now has the drainage gate installed!!! Also finally got the sink all plumbed. Never done any plumbing before. Hopefully no leaks!!! Only took 4 damn trips to homedepot.
...
More updates.
Overhead kitchen cabinets in. Counter tops finished and sink test fit. Lots of plumbing happening.
https://i.imgur.com/bYSbQmo.jpg?1
https://i.imgur.com/ukAgh8T.jpg?1
...
My all time favourite was someone was using a plastic bath seat and then had rolls of duct tape in the footwell. They literally taped their kid each time and then used scissors to cut them out.
...
Worked some carseat checkstops, can confirm, bungie cords/ratchet straps/duct tape have all been observed.
Alright way too much misinformation being given here. In a prior job, I was a certified car seat tech (yea those are a thing).
Need some info from ya. Is your kiddo rear facing or forward facing...
Some more progress this weekend. No pics of some of the work done on the closet and bunk bed, but I did get the grey tank hung (temporarily as it still needs to be plumbed) and had all the gas lines...
Ive always taken my pressure washer to my basement for winter to avoid the risk of cracks
https://i.imgur.com/AsKPAhD.png
lol, but basically yea. We opted to not have a black tank, only fresh and grey. So in the toilet box, is legit a homedepot bucket that will be lined with a...
Slower weekend.
Got the electrical system mapped and the rest of the components ordered.
https://i.imgur.com/FQpoRXN.png
Got the composting toilet roughly framed out. Has a 3d printed...
Eventually, the wife and i want two hammock stands up there once were at our destination. Still trying to figure out how id get a canoe up there safely...
Very productive weekend. Framed out the bed (no pics), got the roof deck installed which is 7.5' x 12', got the air conditioner installed and got the solar panels mounted.
...
Ive got park about good chunk of cash soon. Im guessing ride this volatility out for a few more weeks before making some plays?
Yea theyre upcycled from when I cannabilized an old ikea bunk bed to make a cabin bed for my kid for Christmas :) Almost threw the slats/rails out last month hah
Got lots done this weekend.
Propane fridge vents installed
https://i.imgur.com/QkoIzHZ.jpg?1
Water inlet installed
https://i.imgur.com/SAM9KU5.jpg?1
Prepped to spray but got too windy :(. Was all rolled and brushed.
- - - Updated - - -
Neighbours love it! I give all the neighbour kiddos tours all the time. The bus is never out front for...
Got the roof painted this weekend. Also did an oil change/new filters.
https://i.imgur.com/eEOKSFp.jpg?1
https://i.imgur.com/M2gx4te.jpg?1
There another apple tree nearby? You need another one to cross pollinate
Im a fair weather camper. This thing will not run when its at risk of freezing.
Once im done framing, all the systems get run. There lots of room behind the walls/underneath to run all lines/cables.
Electrical has been the biggest education lift. While im sourcing the...
Some interior update shots. Fridge cabinet, closet, and beginning of shower almost framed out.
https://i.imgur.com/4Tv5Xt1.jpg?1
https://i.imgur.com/Hhs13Az.jpg?1
...
Long overdue. Build is back on. New hole in the roof for another skylight so I can standup when showering.
https://i.imgur.com/ANv0Ww7.jpg
https://i.imgur.com/Avrfgg7.jpg?1
I like this saw. I bought one second hand. You might want to upgrade the fence though as mine sometimes pinches to the blade :S
Anybody use Renogy for electrical components/solar? The bus build is back and I need to start sourcing.
I drove from Munich down to Amalfi in a BMW 4 series convertible. No joke, I could not drive to my airbnb because the road was too narrow lol. We had to park at a hotel and hike in 1.5km with our...
This is why I renewed on a 5 year fixed at 2.78%. I dont need to stress about inflation or rising interest rates when it comes to my mortgage payment. Sure it will likely cost a bit more than...
ahha yea they are lego compatible bricks/direct knockoffs
Good lord no. Quoted cost of actual lego bricks is like $2500CAD.
The brick quality so far is great though. Good clutch. No missing pieces. Technique pins arnt a pain in the ass to push in. This...
Its a stolen design from a private designer. The designers instructions are available for purchase though.