Search:

The best way to clean these is to use steel wool.

If you use sand paper or a scotch brite pad you can actually create a coating (the residual left over melts once it is heated enough times) on...

I have a 2015 WRX. I would suggest that it is a great car to buy (it's really fun to drive) but and a big but.....you have to live with a terrible stereo, it is very hard to drive smoothly (many...

It's a great car. Don't expect to get a discount though-good luck with that. High demand car.

I love mine, it's a very good car. A little fwd biased but there is a reason that you are buying...

Only grass you will see in Calgary at -40 :)

I guess the grass is greener on the other side (of the windshield)

Make sure to read the description.. very professional:

http://i.imgur.com/9bfquKX.jpg

Here you go.


Take a picture of your house and upload it here. Get the closest color they offer to your samples and voila!

...

if you really want to contrast the blue you can use the opposite side of a color wheel (this is how house designers usually do it) The best advice I can give you is go in to a paint store and ask...

Also this will sound crazy but check your U Joints up front, they usually will make a clanking noise if they are bad but if they are way out of balance it can sound like a growl as well. Very cheap...

Does the sound you are referring to sound kind of like a growling? If it does the 4x4 system on these trucks has two parts that frequently go bad and would work in the situations that you have...

Most of the time the car's paint will be faded everywhere except where the pin stripes are if you remove them. Even after you go through the pain of removing them there is a good chance you will see...

http://wbmengines.com/?page_id=14



Cheapest way to go about it. Rebuilds are generally done with crappy aftermarket parts by other companies. Good luck either way.

Depending on age..

Mitsubishi Lancer in some of the up trims are semi fun/reliable and cheap to buy. They really suffer in the resale department for some reason but they are very reliable/good...

It sucks, it doesn't match at all so I can see why you would be upset. Insurance companies want to do the cheapest possible repair job (this is how they keep their money)

Another option that has...

Insurance:

OP :

With the one pay lease idea make sure that there is no risk if the car is totaled, ie. you can owe more that it is worth. I think this is called GAP insurance in Alberta? Make...

OP: If you do go the Home Depot route make sure that your hot water tank has the pressure relief valve on the side and not on the bottom. Some of the ones that they sell has the valve at the bottom...

If you want efficiency you could look to an Electric hot water tank too. Just an option. The gas ones seem to be a bit more expensive to run at least where I live.

Don't do it. Complete waste of $. You will also now have to worry about balancing(where you locate the unit) in your house if you don't want to wait 1-2 minutes for hot water at certain tap/faucet...

BC is not like Alberta. ICBC wants the tax $s from every sale.They want to make sure that either PST(private sale) or HST dealership sale was paid on the car/truck/whatever. They do say that they...

BLUE: Looking through past posts on Beyond it seems like you already knew this was a bad idea:

QUOTED FROM OLDER POST BY YOU:

2BLUE
What happen's if you dont have the vehile registered? Or...

80mph on the water feels like you are gonna die. Sounds ideal.

Look in the Kelowna/Schwap/even the US(will be much cheaper than Calgary). You probably want to get something like a Bayliner as it is more of a family friendly boat/multipurpose boat. I would...

Okay re-read your 1st post. So this box is basically a junction box. You can add a light to this box-it will run off the switch i.e.: when you turn the switch on the bulb will turn on and vice...

is the light in the box pictured or a box further down the line?

What do you need help with exactly? This is commonly called or known as a pigtail. Basically that box was probably there as a junction box. The wires coming in (black and white) (from switch) go...

Hey WeaponR,


You actually have to figure out who made your siding. Vinyl siding isn't as easy as just buying/replacing. Depending on how old your siding is it can be a pain. A lot of the...

Why not take some of the siding off the side that doesn't get seen and put the damaged pieces on that side and then do the patch idea? You will get your color match and the side that isn't seen...

Hey,

Watch this youtube video. The riveting in a peice may work for you?

http://www.youtube.com/watch?v=4ch30NCj1b0

Just depends on how picky you are. Personally I would replace a whole...

I think the thing you are seeing as being a decal might be a ball cap. Hopefully they would be stupid enough to have a sticker there but it really does look to be a hat.

Are the other wires (3 of them) smaller wires? They might be a pigtail.

If it looks like this

http://www.managemylife.com/images/19781/original/photo.JPG?1339040353

it's a pigtail.

...

New around $1500.00 plus install.

Used? probably would be lucky to get $500 for it-not many people want this style.

Super easy to remove, just screws really. I assume by reno you mean that...

Rage: To me this looks to be about as much fun as driving a CGT through Vancouver.


:rofl:

I just had this same conversation with Questrade and my bank.

The best solution we could come up with is to hold a USD bank account and transfer back and forth that way. This will work for any...

I used to use this method back in HS(it has been a while since I even had a cd to be honest) It really works.

Take an old credit card/same size of card and find some tape (the wider and stickier...

I left Calgary and now live in Nanoose Bay. It's a great place but there is literally ZERO for anyone under 40 to do. If you can stand Island/laid back life it's a great place to be. It drove me...

If that is his GF at 0.45 no wonder he loves the car. I would too :D

I just did almost this exact same thing. 20K is probably a little under budget. It will depend on how far you want to move the house. If you do a simple straight up raise it is cheap. Ie...they...

Do yourself a huge favor, hire a good Structural Engineer to draw up the plans & be sure you get a permit to do the work.

What may cost you a few hundred dollars now could save you thousands...

The parts above what I would call the entrance ways (door ways) look like they have headers above them. If they do it means that it is load bearing 90% of the time. I'm not sure what you mean by...

OP:

Have you thought of putting a pad lock on your gate if this is such an issue?

:)

Masconguys post nailed it. It is warm water (condensation) hitting a near frozen pipe (ducting) the condensate pools up in this duct and if not insulated properly then condensates on the inside of...