JDM Si Brake Rotors, where to REPLACE, and to get PERFORMANCE

[jdm_eg6]

*CLOSED*

[jdm_eg6]

no one knows?

[rc2002]

Weren't the JDM EG si's the same as the USDM ones? Did you measure the JDM rotor diameters yet?

[hoamic11]

^ that's what i thought, that their the same

[jdm_eg6]

okay, TY! ill check! hopfully they are.

[jdmsource]

you will have to use 94+ acura gsr brake pads i believe

[jdm_eg6]

^ Agreed, but what Rotors will i use to replace or upgrade with?

[H4LFY2nR]

check this thread

http://www.honda-tech.com/zerothread?id=152884

[jdm_eg6]

arrg, iam still kind og confused.
so for these brakes simply a Si rotor will work and ITR brake pads?

[jdm_eg6]

You would think with all the people on this forum hooked on JDM stuff, and weird swaps they could tell me what brake Rotor and Pads i would use as a replacement for the JDM Si bakes iam putting on with the new spindles... Anyones??? CMONNN!!

if the JDM Si is the same as USDM Si then cool thats all i need!!

[hoamic11]

take a wheel off and measure the size of the disc

[jdm_eg6]

then theres backspacing and all that, i dont have an Si to compair too ...

if anyone has a USDM Si, measure your brake rotor and tell me the diameter for me, and width for shits and gigles. Ty ty!

[hoamic11]

ok how about this, take the rotor off and take it into a partsource and have them check it out, or even go in with yours measure a new one to it

I think the stock diameter size of an si/sir/dc2 rotor is 10.2"

[jdm_eg6]

Ic ic ill do it now, since its not on my car

10.1''

my stocker is like 9.0 or somthing

[eur0]

The Si, CX, VX,and DX are 9.5". The 94-95 Si's got the 10.25" front brakes.

[jdm_eg6]

10.1''

10.25" front brakes.

maybe iam just retarted... hahah, 10 inches, and a big block... 10.1? no? or 10.2??

[GTS Jeff]

Originally posted by jdm_eg6
You would think with all the people on this forum hooked on JDM stuff

I think people are just sort of annoyed at what a "JDM" fan boy you are...

[jdm_eg6]

or not, i just got a good deal on jdm parts from JDM source.

instead of paying 1130.00 i pay 130.00 Umm lets see which you would pick.

and!!! The fact they are a larger brake system, with larger calipers. Damn iam such an idiot for picking this stuff!! ahhh..

sorry for defending myself, but the next time i save 900+ dollers ill probably take the chance and so will you.

if the JDM Si is the same as USDM Si then cool thats all i need!!

and how does that say iam a huge JDM fan, iam just looking for parts that work, like using a SiR brake system would be 100% different or a 5 Lug, thats like bashing guys for asking questions on what kind of 5 lug stuff then can use. because they like the 5 lug conversion and stuff like that.

[EK 2.0]

Originally posted by jdm_eg6
You would think with all the people on this forum hooked on JDM stuff, and weird swaps they could tell me what brake Rotor and Pads i would use as a replacement for the JDM Si bakes iam putting on with the new spindles... Anyones??? CMONNN!!

if the JDM Si is the same as USDM Si then cool thats all i need!!

Why do a JDM Si swap when USDM integra stuff bolts up and there is no guessing of sizes for rotors and shit. And if you are going that far...then why not 5 lug it??

Originally posted by GTS Jeff
I think people are just sort of annoyed at what a "JDM" fan boy you are...

BYAHHHH!!

[jdm_eg6]

Umm i would but i dont know where i could find it for that cheep. thats the problem... and five lug would be great! but the thing is i would have to do the rear right? here ive only paid 130 for everything. Thanks Ek for the input.