Here is a quick little vid beside the garage.
Revved it to 6000 once there, the rest was to 4-5000 on the blips etc.
Cheers...
http://s131.photobucket.com/albums/p...t=MVI_2327.flv
Here is a quick little vid beside the garage.
Revved it to 6000 once there, the rest was to 4-5000 on the blips etc.
Cheers...
http://s131.photobucket.com/albums/p...t=MVI_2327.flv
still sounds like a mac truck. A really angry one :P
I like how that cat/dog runs away from your car when you rev it
i wouldnt say it sounds like a mac truck hahahaa
but sounds good chris really deep chris tone and im sure you picked up a few hp
what did the seat of your pants tell you?
2001 celica pro mod project, in progress
87 fox hatch,[email protected] skating, stock 5.0 shortblock,91 co-op pump gas, 11 lbs boost
Felt good from 6-8000, but not wildly so.Originally posted by stevo 27
i wouldnt say it sounds like a mac truck hahahaa
but sounds good chris really deep chris tone and im sure you picked up a few hp
what did the seat of your pants tell you?
This is for the new mods over the winter.
The motor will need to be able to expel more.
uh oh i feel something crazy coming lol
http://youtube.com/watch?v=gSHToyGIxWE
crazy n/a boys lol
Last edited by stevo 27; 10-23-2007 at 11:03 PM.
2001 celica pro mod project, in progress
87 fox hatch,[email protected] skating, stock 5.0 shortblock,91 co-op pump gas, 11 lbs boost
Damn, you got me. I've bought a used 2003 Honda 3.0L V10
formula 1 motor...
I'm not even building the motor, just a few better parts on the outside. More air in, more air out.
Stock internals k20a2 FTW.
Couple more pics and an in-car video/sound clip
1st-4th in car
sounds good chris meanist n/a 4cyl ive ever seen
2001 celica pro mod project, in progress
87 fox hatch,[email protected] skating, stock 5.0 shortblock,91 co-op pump gas, 11 lbs boost
I like it!
Here is another manifold for Steed Speed.
This is a prototype for the mazdaspeed protege.
chris do you know if these manifolds are stronger than tubular manifolds
2001 celica pro mod project, in progress
87 fox hatch,[email protected] skating, stock 5.0 shortblock,91 co-op pump gas, 11 lbs boost
you need another tigger on hand?
when cut open, the rambutan unfortunately fails miserably to deviate from its outwardly testicular appearance, revealing an inside that looks for all the world exactly how you'd expect the contents of a scrotum to look.
Considerably stronger, and in more ways than one.Originally posted by stevo 27
chris do you know if these manifolds are stronger than tubular manifolds
Sorry, not at this time.you need another tigger on hand?
Hey....Nice work...
Do you have a rate you go by?
...im looking into a possible custom exhaust for my supra....if its going to happen its going to happen in the next couple of weeks....
I would like to chat to you about it. It will be a cat back system...
Also i will need Cold side charge pipes....with VERY few couplers....SO i would say a MAX of 6 One from the turbo...2 to and from the inter cooler and one for the TB...and two for possible(and only if needed) for engine movement. Anyway..i can snap a couple of pics if need be for some quick reference.
And in the Somewhat far future i may look into a Custom T3 Manifold adapter. for my car for a possible turbo upgrade i am researching. anyways...Shoot me a PM...i would like to talk
Some more billet hotness....
First one is an s2000 manifold:
This one is a toyota manifold, for a 20r, or 22r???
4 runner motor anyway:
Nice WORK!!!
Question for the welders, so I've been welding for 5-6 months now, MIG welding, and noticed that my skin has been starting to peel, I dunno if its from the heat or dryin out my skin but I've been applying SPF30 lotion recently...and use Jergens Dry Skin lotion at night...
What do you guys use/prevent this from happening?
Last edited by dj_rice; 11-26-2007 at 10:25 PM.
Originally posted by GTS Jeff
You know those bored stay at home moms who's entire lives revolve around driving their kids to soccer, various cleaning accessories, and worrying about neighbourhood rapists? The kind of people that watch the View and go "uh huh..." Those unfulfilled people who try to fill the void in their empty lives by writing whiny letters to the editor complaining about shit that no one really cares about?
Well imagine if instead of writing that letter to the editor, she just posts on a car forum for car enthusiasts. That's Kritafo.
You have to cover it with dark clothing. Arc is 10,000F.Originally posted by dj_rice
Nice WORK!!!
Question for the welders, so I've been welding for 5-6 months now, MIG welding, and noticed that my skin has been starting to peel, I dunno if its from the heat or dryin out my skin but I've been applying SPF30 lotion recently...and use Jergens Dry Skin lotion at night...
What do you guys use/prevent this from happening?
Shouldn't have any exposed skin, it will just get fried.
Where is this on your body?
This happens when your skin is exposed to the light rays given off by the welding. Make sure all your skin is covered or be prepared for skin cancer. Hope you haven't been getting direct light on your skin this whole time. Leathers or at least heavy woven dark clothing.Originally posted by dj_rice
Nice WORK!!!
Question for the welders, so I've been welding for 5-6 months now, MIG welding, and noticed that my skin has been starting to peel, I dunno if its from the heat or dryin out my skin but I've been applying SPF30 lotion recently...and use Jergens Dry Skin lotion at night...
What do you guys use/prevent this from happening?
I hope they are pacifying thoes nice billet peices before they go out to customers
Machining, Fabricating, Welding etc.
Do explain....Originally posted by legendboy
I hope they are pacifying thoes nice billet peices before they go out to customers
They get coated.