Quantcast
Launching? - Beyond.ca - Car Forums
Results 1 to 6 of 6

Thread: Launching?

  1. #1
    Join Date
    May 2002
    Location
    oreo cookie
    My Ride
    a wrx.
    Posts
    8,031
    Rep Power
    31

    Question Launching?

    how do u guys launch?

    after my first time thru the 1/4 mile yesterday, ive determined that i blow at launching. my best 60' time was 2.5s, which seems kinda high for an FR car with grippy falken azenis..

  2. #2
    Join Date
    Jun 2002
    Location
    ___________________________
    My Ride
    400whp MR2 - An Italian and a couple of Germans
    Posts
    11,139
    Rep Power
    33

    Default Re: Launching?

    Originally posted by GTS Jeff
    how do u guys launch?

    after my first time thru the 1/4 mile yesterday, ive determined that i blow at launching. my best 60' time was 2.5s, which seems kinda high for an FR car with grippy falken azenis..
    I dont remember the specific rpm needed to properly launch an ae86 but I think it was around the 3700 mark. I usually feather the throttle between 35 and 38 drop the clutch while flooring it
    Looking for a new VW? How about a used vehicle? We are Central Albertas #1 source for pre-owned vehicles
    I will beat any deal on a new VW for beyonders

    Gary Moe Volkswagen/Gary Moe Used Car Superstore!

    Red Deer, AB

  3. #3
    Join Date
    May 2002
    Location
    9.872604, -85.498802
    My Ride
    Turbos n Stuff™
    Posts
    5,960
    Rep Power
    27

    Default

    My best time last night was with a 2.3 60' (normally I'm around 2.5)

    I pretty much just dumped the clutch at 6000 and feathered the gas pedal to regulate control around 6500.

    All other times I launched at lower rpm (4-55) I got way slower 60' times.

    Also had my front tire pressure at 15psi...

    Also, yeah, your tires are grippy, but your car lacks alot of TQ and HP to keep you from bogging which was evident whenever I saw you launching.
    Travel

  4. #4
    Join Date
    May 2002
    Location
    Calgary, Alberta
    Posts
    1,295
    Rep Power
    23

    Default

    Nice 60ft time Ben, looks like you got some Madd Skills!
    You start with a bag full of luck and an empty bag of experience. The trick is to fill the bag of experience before you empty the bag of luck.

  5. #5
    Join Date
    May 2002
    Location
    9.872604, -85.498802
    My Ride
    Turbos n Stuff™
    Posts
    5,960
    Rep Power
    27

    Default

    Originally posted by 5.9 R/T
    Nice 60ft time Ben, looks like you got some Madd Skills!
    heh, thanks. I've generally been pretty good on the launches.

    HEAPS of torque steer though, it was challenging having to fit the 1-2 shift in there and get back to controlling more torque steer. Thats why who ever saw me out there last night I missed two 1-2 shifts. I was swearing like a sailor the whole rest of the strip.

    Now as for Jeffs launches, well, I've never had the opprotunity to try launching that beast. I would think with a motor as peeky as his you would have to launch realativly high.
    Travel

  6. #6
    Join Date
    Feb 2003
    Location
    Gulf Shores, Alabama, USA
    My Ride
    Porsche 944 Turbo
    Posts
    99
    Rep Power
    0

    Default

    I have a 1989 944 non turbo, which is a FR setup and similar to your power. I think torque is really gonna dictate at what RPM you launch at, inversely proportional, or course. What you do with the launch in terms of dropping or feathering is more of a preference. I used to drop the clutch, and now I prefer feathering. I have found that in my particular car, even moreseo in the turbo, that a 4k launch with a decent amount of clutch feathering can produce consistent 2.1 60ft times.

    I think the variables to consider are:
    -Torque
    -Drive layout
    -Tire width/compound
    - How much you like you clutch

    If its that important to you, the new Gtech can measure 60ft as well as just about everything else. That is the best way to figure it out if you dont want to take it to the strip. I played around with different techniques using the Gtech as a reference and got mine down 3 tenths.
    1986 Porsche 944 Turbo

    No Dyno Sheet yet but I hope to make 400RWHP @24 PSI

Similar Threads

  1. S2000 vs GTP - Launching 101

    By SilverStreak in forum Cars, Bikes, Machines
    Replies: 14
    Latest Threads: 12-17-2002, 06:55 PM
  2. launching technique

    By GTS Jeff in forum General Car/Bike Talk
    Replies: 28
    Latest Threads: 12-10-2002, 08:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •