F&F slip up??

[Ferio_vti]

http://www.slipups.com/items/17214.html

[Redlyne_mr2]

that whole movie was a slip up....
rememer when Jesse shows brian "highly complex supra program" on his computer
Jesse:....and I can make it any color..blue , red , green...
Brian: Man you should go to M.I.T or something
Redlyne_mr2:WTF???

[2000impreza]

no kidding. f&f was the biggest wannabe racing movie ever made. i can't believe they are making a part 2

[Redlyne_mr2]

Originally posted by 2000impreza
no kidding. f&f was the biggest wannabe racing movie ever made. i can't believe they are making a part 2

well they did make mad profit with the first one..the best about the f&f was going to opening night with all the buds and all the cars then goign cruising afterwards and having everyone go crazy over our cars after having seen the movie

[LUDELVR]

You mean......it's.....not........real?????? Fuck all you guys, you're just a bunch of jealous homos!!!!!!!!!!!! You just wish that you had a T4 turbo in your eclipse and....a Haltech Exhaust!!! And you wish that if you weren't unloading in 3rd (I told you it was 3rd) that you'd run 9's!!!!

[Redlyne_mr2]

Originally posted by LUDELVR
You mean......it's.....not........real?????? Fuck all you guys, you're just a bunch of jealous homos!!!!!!!!!!!! You just wish that you had a T4 turbo in your eclipse and....a Haltech Exhaust!!!

nooooooo its a motech system exhaust ..dont you hate when your floor boards come unbolted and fall out from racing to hard..he must have fixed it quickly though cause 5 minutes later vin diesel is riding shotgun and everything seems fine

[Ferio_vti]

Originally posted by Redlyne_mr2

he must have fixed it quickly though cause 5 minutes later vin diesel is riding shotgun and everything seems fine

Vin must have been riding "Flinestones" with the floor panel missing.
Yabba Dabba Doo!!

[B17a]

Originally posted by Redlyne_mr2

nooooooo its a motech system exhaust ..dont you hate when your floor boards come unbolted and fall out from racing to hard..he must have fixed it quickly though cause 5 minutes later vin diesel is riding shotgun and everything seems fine

I'm no mechanic, but can someone explain to me why and how the floor board came off from racing???

[Ferio_vti]

Originally posted by B17a


I'm no mechanic, but can someone explain to me why and how the floor board came off from racing???

For that matter, why the hell did he even have a hole in the floor to begin with???

[Redlyne_mr2]

Originally posted by Ferio_vti


Vin must have been riding "Flinestones" with the floor panel missing.
Yabba Dabba Doo!!

hahahahahah..thats what I assumed..wonder if thats what the director wanted us to assume?

Originally posted by B17a


I'm no mechanic, but can someone explain to me why and how the floor board came off from racing???

probably from all that NAWSSSS!!!...what Id like to have explained to me is how the eclipse was still hauling ass from the cops without puffing even a tiny bit of smoke after the piston rings were "fried"

[redline]

Originally posted by B17a


I'm no mechanic, but can someone explain to me why and how the floor board came off from racing???

He did not have enough boundry re-enforcing and thus combined with a overheated muffler bearing from the untested second stage of nos caused a pressure inversion in the floor board area that caused to much stress on the hyper bolts that connected to ricer floor mats. This all led to a thermo reaction in the floor board area that led to the failure of the part in question.

[B17a]

Originally posted by redline


He did not have enough boundry re-enforcing and thus combined with a overheated muffler bearing from the untested second stage of nos caused a pressure inversion in the floor board area that caused to much stress on the hyper bolts that connected to ricer floor mats. This all led to a thermo reaction in the floor board area that led to the failure of the part in question.

Thanks Professor! That dumb sonofabitch should have put in a flux capacitor!

[Redlyne_mr2]

Originally posted by redline


He did not have enough boundry re-enforcing and thus combined with a overheated muffler bearing from the untested second stage of nos caused a pressure inversion in the floor board area that caused to much stress on the hyper bolts that connected to ricer floor mats. This all led to a thermo reaction in the floor board area that led to the failure of the part in question.

you hack you pulled that out straight from the mitchell automotive diagnostics program didn't you

[BarryBeach]

Originally posted by redline


He did not have enough boundry re-enforcing and thus combined with a overheated muffler bearing from the untested second stage of nos caused a pressure inversion in the floor board area that caused to much stress on the hyper bolts that connected to ricer floor mats. This all led to a thermo reaction in the floor board area that led to the failure of the part in question.

DUDE !! you should goto M.I.T or somthing

[sexualbanana]

did u notice that his laptop was somehow flashing 'DANGER TO MANIFOLD' then his floorboard came flyin out and miraculously didn't hit a single person or car?

[Redlyne_mr2]

Originally posted by BarryBeach


DUDE !! you should goto M.I.T or somthing

hahahahahahahahaa

[B17a]

Originally posted by sexualbanana
did u notice that his laptop was somehow flashing 'DANGER TO MANIFOLD' then his floorboard came flyin out and miraculously didn't hit a single person or car?

Exactly, isn't the manifold (intake one I pressume) located UNDER the hood? If so, then the question again is how does this result in the floor board becoming unbolted?

[spyderman]

That wouldn't of happened if he used JB Weld, right Leo?

[RX-7_TWINTURBO]

did anyone else win $1001 dollars for a trip to mexico when they visited ?

[Ferio_vti]

$1001?? Mexico??
WTF are you talking about??