High powered 3sgte's amoung us

[stevo 27]

who's making big power now and who's going to be this cummin season???
whats your setup ??
ill start
i will be done for this seaon

Motor:
2.0l
gt3588r garret turbo
tail 40mm wastegate
custom echaust manifold
32x12x3 fmic
2.5/3 ic piping
twin hks bovs
rmr centerfeed intake manifold
75mm bbk mustang tb
272 e/272i cams
ferra dual springs
full port job
shimless bucket conversion
l-19 head studs
mttl wrc head gasket
weisco 86.5mm pistons
pauter rods
acl race main/rod bearings
high flow oil pump
ferra comp plus over sized valves
custom aluminum rad
intercooler spray purge kit



Electronics:
autotronic smc
hks evc 5 boost controller
msd digital 6 ignition



Fuel system
1600cc top feeds
top feed rail
aeromotive a1000 (motor)
aeromotive tsunami(nitrous)
1/2 id lines
twin adjustable fprs (1 nitrous, 1 fuel)
direct injection fogger nitrous system 200hp shot(capable of 600hp shot)


Drivetrain:
1993 RC transmission
rps carbon on carbon billet series clutch
speedsource shifter bushings
speedsource soild motor mounts
speedsource aluminum crossmember bushings
ATS axles cages (all 4 corners)
soild aluminum rear diff mount
aluminum driveshafts
tein ss coilovers
willwood big brake hit
motieg tack lites 16x8


Interiour:
Full Gauges
Lightweight seats
full cage certed for 8.50's
gutted interiour
aluminum hatch floor
rear hatch and quarter windows replaced with mr10 lexan pieces


thats what ill be sporting for next year

who else is gonna be rocking

might be the last year for race city boys

[doublepostwhore]

are you hot tanking/decking your block aswell?

What kind of standalone are you going to run? I emplore you to look into a microtech.

[Ghettobaby]

3S block, torque plate bored, honed, deglazed, vatted, cleaned, painted, assembled
5S crank destroked to 3S rod sizes, balanced with rotating assembly, micropolished
King Engine Bearings & Thrust Washers
CP 86.5MM forged stroker pistons, 9.0:1 compression, 020 over bore
Eagle H-Beam Rods
New OEM oil strainer, real seal & rear seal retainer
MCS New OEM Shimmed Oil Pump w/ front main seal
ARP Head studs
Cometic MLS HG
Greddy timing belt
1mm OS Competition Plus Valves, keepers, locks, bronze guides, TI retainers
Dual valve springs
Blitz 264 cam
1ZZ Shimless buckets
3.25" Kakimoto racing exhaust
ct26/35r
850cc sard injectors
berkside mount
ku racing manifold
q45 throttle body
aem ems
clutchmasters fx400 6puck
dual intank walboros
4an fuel feed line


thats all i can think of right now

[Ghettobaby]

my stroker and clutch shipped out already so they should be here soon. And the rest is either on the car right now or in my basement.

Oh yeah I also have a full msd ignition setup.

[doublepostwhore]

tibby when does your engine get here?

[Ghettobaby]

It should be here before jan 15th, thats the absolute latest assuming it encounters all reasonable delays.

[stevo 27]

Originally posted by Ghettobaby
3S block, torque plate bored, honed, deglazed, vatted, cleaned, painted, assembled
5S crank destroked to 3S rod sizes, balanced with rotating assembly, micropolished
King Engine Bearings & Thrust Washers
CP 86.5MM forged stroker pistons, 9.0:1 compression, 020 over bore
Eagle H-Beam Rods
New OEM oil strainer, real seal & rear seal retainer
MCS New OEM Shimmed Oil Pump w/ front main seal
ARP Head studs
Cometic MLS HG
Greddy timing belt
1mm OS Competition Plus Valves, keepers, locks, bronze guides, TI retainers
Dual valve springs
Blitz 264 cam
1ZZ Shimless buckets
3.25" Kakimoto racing exhaust
ct26/35r
850cc sard injectors
berkside mount
ku racing manifold
q45 throttle body
aem ems
clutchmasters fx400 6puck
dual intank walboros
4an fuel feed line


thats all i can think of right now

wicked man

should we do a stroked gt4 vs stroked mr2 race this summer

and are you getting the beefed up axle cages and 4340 axles ??

you guys have it bad for snapping axles

[Ghettobaby]

I'm still looking into what i'm gonna do for my drivetrain. But I will probably just get the ats cages and see if thats good enough. Then i still need a good lsd, and I wanna cut away some of the quarters and flare it so I can stick some big ass rubber in there.

[stevo 27]

well if your not 2stepin and load up your drivetrain so theres no serious shock loading you should be fine why not go widebody

[avow]

dear lord, you guys make my mr2 look like shit

[stevo 27]

Originally posted by avow
mr2 look like shit

HAHAHA are insane an mr2 look like shit

dude you own one of the sexiest cars ever built imho

wether it be stock or insane it's still awsome

[stevo 27]

Originally posted by stevo 27



HAHAHA are you crazy an mr2 look like shit

dude you own one of the sexiest cars ever built imho

wether it be stock or insane it's still awsome

[DonJuan]

Thats what you call a high powered 3SGTE? LOL!
.
.
.
.
.
Thats more one the level of INSANE isn't it?

[supaj87GTS]

I'll make my list soon....just planning my route of build

[Ghettobaby]

Originally posted by avow
dear lord, you guys make my mr2 look like shit

Haha I guareenty your car looks better than mine. Although most of my exterior is now carbon fiber the rest is sanded down to primer, and I have retrofitter rs6 projectors without any covers. I stoped caring about looks and decided to concentrate on what I'm good at the mechanics. Should be fun swapping engines on my driveway this winter haha

[stevo 27]

Originally posted by DonJuan
Thats what you call a high powered 3SGTE? LOL!
.
.
.
.
.
Thats more one the level of INSANE isn't it?

nah mildley insane hahah


3-sgte PWNS

[stevo 27]

Originally posted by Ghettobaby


Haha I guareenty your car looks better than mine. Although most of my exterior is now carbon fiber the rest is sanded down to primer, and I have retrofitter rs6 projectors without any covers. I stoped caring about looks and decided to concentrate on what I'm good at the mechanics. Should be fun swapping engines on my driveway this winter haha

hey tibby are you ever gonna drop by and pick up one of my manifolds?

[Ek9Max]

whoa. Gonna be a few fast 3sgte's this coming summer....

Well we enver get done, so there probably won't be any fast 3sgte's this summer..... lol

[A790]

I got something special for all of y'all

I got my MR2 an appointment with "Yoshio", who's like an MR2 tuning god out here, to do a few things to the car. I've also decided against the TD06 kit (sold it to a local kid) and am using a berk GT kit instead.

Should be good. New power goal is 425 whp.

[mr2mike]

Originally posted by Ek9Max
whoa. Gonna be a few fast 3sgte's this coming summer....

Well we enver get done, so there probably won't be any fast 3sgte's this summer..... lol

+1

I think I've seen a total of 3 MR2's at a meet.

New goal for a meet in '08... bring an MR2... anything really.
I don't care if its got an aluminum spoiler, stock rims, one headlight motor not working, smoking exhaust... bring it.