Lots of misc j body 2.4 parts and misc odds and ends

[LAFNGAS]

12" disk brake rotors for the rear, for a big brake kit if someone was wanting to make their own, already setup for the 5 x 100 bolt pattern
lots of stock 2.4 parts
Stans Isuzu performance 4-2-1 header
stock throttle body
stock intake manifold
stock 2.4 injectors (4)
stock fuel rail (2)
stock fuel rail lines
stock exhaust manifold 00-02 no egr (2)
idi covers (2) good for painting/powder coating
drivers/pass side air bags with all sensors : air bag and steering wheel, passenger side air bag, sensor that goes under the passenger side seat and the sensor to go in the front end by the hood latch
02 cavalier z24/ls sport front lip in silver, all tabs are there and in great shape
tan cavalier headliner for a sunroof car, has everything and in good shape
2.4 power steering pump
2.4 head with cams and full valve train
2.4 power steering pump pressure side hose (brand new)
2.4 throttle body with sensors
2.3 HO injectors
95-99 air bags with sensors and everything to work
2.4 block with 2 cranks
2.4 rods/pistons and full bottom end
2.4 intake manifolds
idi covers
MSD 8.5mm spark plug wires for a 2.2 or 2.4 coil swap (brand new)
2.4 coil packs and icms
2.4 stock springs
autometer ultra lite narrow band a/f gauge
trunk net
AEM 3" cone filter (brand new)
rear fender liners like off the 03+ cavaliers (brand new)
stans isuzu performance 4-2-1 header
12" rotors for rear big brake kit, someone will have to fab something up though
3/8 -> -6 quick connector with -6 stainless braided line and includes the fitting for the fuel rail thats threaded to the -6
spec lightweight flywheel for a 2.4 (needs a new friction plate) $125 for the flywheel and $200 for the flywheel and i get the friction plate for you
5x black 2.5" reinforced couplers
1x black 4" coupler
1x 2.5" t bolt clamp
2x 2.75 t bolt clamp

misc -10 aeroquip fittings
45* part # is fcm 4024
90* part # is fcm 4034
60* part # is fcm 4084

arp headstud parts for a 2.4
have the washers/nuts and 2 of the short studs, can get the long studs no problem and ship as a full kit

[LAFNGAS]

bumping to the top