Quantcast
Lots of misc j body 2.4 parts and misc odds and ends - Beyond.ca - Car Forums
Results 1 to 2 of 2

Thread: Lots of misc j body 2.4 parts and misc odds and ends

  1. #1
    Join Date
    May 2004
    Location
    Red Deer, Alberta
    My Ride
    2009 TT Jeep SRT8
    Posts
    188
    Rep Power
    0

    Default Lots of misc j body 2.4 parts and misc odds and ends

    12" disk brake rotors for the rear, for a big brake kit if someone was wanting to make their own, already setup for the 5 x 100 bolt pattern
    lots of stock 2.4 parts
    Stans Isuzu performance 4-2-1 header
    stock throttle body
    stock intake manifold
    stock 2.4 injectors (4)
    stock fuel rail (2)
    stock fuel rail lines
    stock exhaust manifold 00-02 no egr (2)
    idi covers (2) good for painting/powder coating
    drivers/pass side air bags with all sensors : air bag and steering wheel, passenger side air bag, sensor that goes under the passenger side seat and the sensor to go in the front end by the hood latch
    02 cavalier z24/ls sport front lip in silver, all tabs are there and in great shape
    tan cavalier headliner for a sunroof car, has everything and in good shape
    2.4 power steering pump
    2.4 head with cams and full valve train
    2.4 power steering pump pressure side hose (brand new)
    2.4 throttle body with sensors
    2.3 HO injectors
    95-99 air bags with sensors and everything to work
    2.4 block with 2 cranks
    2.4 rods/pistons and full bottom end
    2.4 intake manifolds
    idi covers
    MSD 8.5mm spark plug wires for a 2.2 or 2.4 coil swap (brand new)
    2.4 coil packs and icms
    2.4 stock springs
    autometer ultra lite narrow band a/f gauge
    trunk net
    AEM 3" cone filter (brand new)
    rear fender liners like off the 03+ cavaliers (brand new)
    stans isuzu performance 4-2-1 header
    12" rotors for rear big brake kit, someone will have to fab something up though
    3/8 -> -6 quick connector with -6 stainless braided line and includes the fitting for the fuel rail thats threaded to the -6
    spec lightweight flywheel for a 2.4 (needs a new friction plate) $125 for the flywheel and $200 for the flywheel and i get the friction plate for you
    5x black 2.5" reinforced couplers
    1x black 4" coupler
    1x 2.5" t bolt clamp
    2x 2.75 t bolt clamp

    misc -10 aeroquip fittings
    45* part # is fcm 4024
    90* part # is fcm 4034
    60* part # is fcm 4084

    arp headstud parts for a 2.4
    have the washers/nuts and 2 of the short studs, can get the long studs no problem and ship as a full kit
    Big 5000+lbs brick, a couple of 67mm turbos and a heavy foot......... now a best of 9.19 @ 152mph

  2. #2
    Join Date
    May 2004
    Location
    Red Deer, Alberta
    My Ride
    2009 TT Jeep SRT8
    Posts
    188
    Rep Power
    0

    Default

    bumping to the top
    Big 5000+lbs brick, a couple of 67mm turbos and a heavy foot......... now a best of 9.19 @ 152mph

Similar Threads

  1. WANTED: PC fans, heatsinks, other odds and ends

    By witchcraftz in forum Computer Hardware & Peripherals
    Replies: 3
    Latest Threads: 10-04-2010, 06:48 PM
  2. FS: some odds & ends...sold my car

    By gmoney82 in forum Automotive Parts
    Replies: 5
    Latest Threads: 08-25-2008, 06:49 PM
  3. old school cerwin vega and odds and ends

    By onehawtrex in forum Automotive Parts [Audio/Video/Radar Systems]
    Replies: 0
    Latest Threads: 06-22-2008, 03:21 PM
  4. MISC body parts!!! lots for sale.

    By Ek9Max in forum Automotive Parts [Aero/Styling/Interior]
    Replies: 0
    Latest Threads: 06-07-2004, 12:30 PM
  5. FS: Car part odds/ends

    By Deetz in forum Automotive Parts
    Replies: 9
    Latest Threads: 01-14-2004, 06:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •