FS: Huge Part Out Of My 1000Hp DSM

[Ron@Revolution]

Going to try to put all the parts that are coming off my car in this one thread to make it easier

OZ Superleggra 18" rims, with BF Goodrich KD tires 225/4018's (90% tread left) $1200


Custom GSC Cams these things made crazy power pushed my 3200lb car to 160 Mph on only 34-35 psi


Supertech Dual Valve Springs and Retainers $175


NIB Supertech Dual Valve Springs, Titanium Retainer, Spring Seats, and Valve seals $275


Rota SlipStreams 16" with almost new Hoosier QTP's $1200


Freshened Tilton Twin Disc, this clutch just came back from Tilton and is back to better then new specs and upgraded to the new series of springs good now to 1050 Ft/Lbs A steal at $2500 This is a $5000 clutch with $400 orth of upgrades This gets rid of the stock throwout bearing and clutch fork and pivot ball and replaces it with a custom hyd throwout bearing very slick. Clutch comes with three pressure plate shims and is fully rebuildable this is truely the last clutch you well ever need to buy

New in Box ACT Twin Disk Tons of Clamping power without all the pedal pressure of a 2600, comes with twin disk, lightened flywheel, and Throwout Bearing $1500

[LAFNGAS]

whats the bolt pattern on the rota's? 5x100 and 5x114.3?

[Jetta-2.0]

so im guessing its a for sale thread? lol

[Ron@Revolution]

Originally posted by LAFNGAS
whats the bolt pattern on the rota's? 5x100 and 5x114.3?

Sorry 5 x 114.3

[Ron@Revolution]

Originally posted by LAFNGAS
whats the bolt pattern on the rota's? 5x100 and 5x114.3?

I have some 18" Enkies with BF Drag radials for sale two

[Ron@Revolution]

2G AEM EMS $700

[LAFNGAS]

Originally posted by Ron@Revolution


I have some 18" Enkies with BF Drag radials for sale two

what size radials/how much wear and what bolt pattern?

looks like the rota's have 2 different bolt patterns in it, if one is 5 x114.3, whats the other pattern?

[Ron@Revolution]

Original Post Removed. (Please read the Forum Rules and Terms of Use before posting again, or risk getting banned).

[LAFNGAS]

edited post, for asking about the rota's and the 18's

[Ron@Revolution]

Everything is 5x114.3 I do have some new drag radials off rim also

[LAFNGAS]

Originally posted by Ron@Revolution
Everything is 5x114.3 I do have some new drag radials off rim also

i know you said 5 x 114.3 but on the rota's you can clearly see that theres 10 holes so if they were on your car, one pattern is 5 x 114.3 and curious what the other is

[Ron@Revolution]

OZ Superleggra 18" rims, with BF Goodrich KD tires 225/4018's (90% tread left) SOLD

[kanip]

Do you by chance have the original ecu for the car? I'm looking for a 2g Socketed eprom ecu for my build... I think the aem ems is a little extensive for what I am looking for....

[Ron@Revolution]

No Sorry I dont'

[Crazyjoker77]

Hey ron, I'm interested in the rotas and hoosiers but am wondering what the second bolt pattern is on them. i know dsms take 5x114 but are the ones you didnt use 5x100 or 5x120?

Its not a huge deal to me as they will still fit my eclipse but would be great if they also fit my gt-fours!

What overall diameter/width are the slicks?

I know you live in edmonton is there anychance we could meet in calgary or red deer? as I'm currently in the hat I know your busy so would you be willing to look into shipping them down?

I am very interested in them and if everything works out i have the cash in hand ready to go.

As well if you got any customers looking for DSM parts I'm getting quite a collection of all sorts of stuff that I wouldnt mind parting with.

Regards,

Curtis