Juss doin what the haters cant!
Juss doin what the haters cant!
hehe just you responding means you have been phased!Originally posted by Reggie@MWDesign
i get enough of this on facebook..
i'll say it again.. do i have to do math for you guys in how parts are affordable when you sell old parts and buy new..
its also helps to have sponsors from Rywire, K-Tuned, Downstar, Circuit Hero, and Evasive.
hate all you guys want. it doesnt phase me. I am just sharing what I have been spending money on.
but srsly, your yellow teg was the best.
Originally posted by know1edge
Trollception. MGCM used CapnCrunch's troll and inverted that troll attempt into another troll attempt getting ya'll to believe that he's serious... However, maybe ya'll are trollceptioning me into believing that you believe him. What you don't know is that I was trollceptioning ya'll into believing that I believed you believed the OP that believed CapnCrunch.
how does one land so much sponsors for a integra?
Originally posted by beyond_ban
Yo Kanye, ima let you finish, but 50 Cent had the best concert cancellation of all time.
^All of the sponsors he has listed, have collectively sponsored many other high caliber street "hondas" in the United States as well. Its not surprising.
Keep up the good work, Reggie!
hahah okay i was bothered, but just sharing, this is a build thread haha should i start just not updating i guess?Originally posted by Scope951
hehe just you responding means you have been phased!
but srsly, your yellow teg was the best.
anywayssss the yellow teg of mine was slapped together and was a POS hahaha i am glad its not in alberta anymore =P
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal
Hey guys,
sorry for the lack of updates for the past month..
if you guys are following me on instagram (reggieatfourplusone) some of you, you would see every update for my car to date since I take iphone photos of literally every part i get and what i do on the car.
so for the time being, i will upload all the pics of my phone since my last update.
I will start taking photos with my camera when the car is back together... i have a June 8th deadline to make a local car show... so fingers crossed everything will arrive before then!
Hopefully these photos will be self explanatory =D
OEM CF Center Console:
OEM EDM DC2 Rear Foglight
K-Tuned Fuel Lines and Rail
All in Fab Custom Catch Can, Race Header and Tucked Rad with Dual Fan Shroud
Tuck Rad Prep
K-Tuned Rail with OEM RDX Injectors
All in Fab Header mock up
All in Fab Rad Mounted
ASC/Circuit Hero Roll Bar Custom made for DC2 Chassis
Beatrush Cooling Plate
More K-Tuned Goodies
Hope this is a good enough update for now
:nervy: :nervy:
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal
That roll bar is insane.
Blog: http://officialthreetwenty.com/
'92 Grand Prix SE sedan: 3.1L V6 / Auto
'12 Focus SE sedan: 2.0L I4 / 5-speed manual
-Bill M.
just saw you on crowchild a few hours ago. Nice!
Submaker.Illest.
Such a sick build
hey reggie, how was cutting into the rear bumper for the rear foglight? I was going to do mine also when I do my 98+ rear.
Originally posted by Mibz
Somebody quoting things without reading them? On the internet?
GET THE FUCK OUTTA TOWNOriginally posted by Toma
First dibs sniffing bras panties when dirty girls bring their cars in
Mocking up the K-Tuned Shifter with the K-Tuned Tray and K-Tuned Race Cables! Thanks to Mike@K-Tuned once again!
Here's a little more detail goodies I wanted... K-Tuned Shifter Cable Bracket VS OEM
The mess inside the car. Mounting shifter and Rywire Tucked Brake Lines.
Battery Relocation Install and Prep for EDM Rear Fog... had to remove everything to get the rear bumper off.
Buddy wiring my front end
Bunch of friends came out to chill and help out here and there!
Time to mount the Backyard Special Front Bumper fresh from the body shop
After waiting for 2 months and a bit it finally arrived. The ASC/Circuit Hero Roll Bar. Many of you have probably already seen this roll bar in Circuit Heros EG build as well as in ATS*ANH's Black ITR! I am super happy with the construction of this bar. the Connecting points are interlocking and super clean
So spend a day and a bit prepping and painting the cage then 3 hours of trimming the interior panelling, and fitting the cage in here is how things turned out.
Also painting my J's C-Pillar bar "Mag Blue" as well while we were at it!
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal
As she sits for now June 12th, 2012
waiting for my new willans still, wish i never sold my White ones =.='
have a few more things to figure out on the car and get the kinks out before I go for a tune
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal
you might be able to get your white ones back. working a deal with my s14 right now
how much for the collapsing black recaro? mesh cupholder included?
LOL! dude... Canadian tire sells em! $15ea! but the mesh cup holder is a option! =POriginally posted by v2kai
how much for the collapsing black recaro? mesh cupholder included?
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal
[/B]
Looks like installation was pretty easy.
Blog: http://officialthreetwenty.com/
'92 Grand Prix SE sedan: 3.1L V6 / Auto
'12 Focus SE sedan: 2.0L I4 / 5-speed manual
-Bill M.
but yours has the jdm green painters tape...Originally posted by Reggie@MWDesign
LOL! dude... Canadian tire sells em! $15ea! but the mesh cup holder is a option! =P
crazy build
balls.
holy shit... that is beautiful..
Thanks man =DOriginally posted by K3RMiTdot
holy shit... that is beautiful..
Build Thread: http://forums.beyond.ca/showthread.p...09#post3891809
98 DC2 Integra Type R W/ JDM K20A
Thanks to my Sponsors:
Circuit Hero | Rywire | K-Tuned | Downstarinc | All in Fab | ASC Metal